Electric single induction wok - HP (5 kW)
Features:
- Diameter of pots to be used: minimum 12cm to maximum 28cm to obtain maximum heating efficiency
- Suitable for countertop installation
- 6mm glass ceramic cooking surface with a total power of 5 kW
- Indicating lamp for each zone located on control console
- Induction plates endowed with overheating safety device
- Power to the zone can be set with progressive output i.e. fine regulation at the lower and larger progress at the upper levels
- Low heat dissipation to the kitchen
- IPX 4 water protection
- The smooth, glass ceramic plate is not directly heated, so there is no burning on cooking surface
- Automatic pan detection to transfer power only when pan is present
- One piece pressed 1.5mm work top in stainless steel
- Model has right-angled side edges to allow flush fitting joints between units, eliminating gaps and possible dirt traps
- Induction compatible pots & pans must be used.
Key Information:
Back Plates Power: 5-kW
Back Plates Dimensions: Ø 300
External Dimensions: 400mm W x 700 D x 250 H
Net Weight: 20 kg
All exterior panels in Stainless Steel with Scotch Brite finishing.
Electric:
Supply voltage: 380-400 V/3 ph/50/60 Hz
Total Watts: 5 kW
Predisposed for: 380-400V 3~ 50/60Hz 4.5-5kW
Please note: If the appliance is set up on or next to or against temperature sensitive furniture or similar, a safety gap of approximately 150mm should be maintained or some form of heat insulation fitted.
N.B Images are for illustrative purposes only. Specifications are subject to change without notice.
