Thermaster TPB1800 1798mm Commercial Pizza Prep Bench (9 x 1/3 GN) | 10A Plug

[THERMASTER_MSG] 

The Thermaster TPB1800 Commercial 1800mm Refrigerated Pizza & Sandwich Prep Bench is an extra-wide, industrial-grade preparation workstation engineered specifically for Australian pizzerias, Italian trattorias, bakeries, burger outlets, and high-volume commercial catering kitchens. Spanning 1798 mm Wide x 820 mm Deep x 1050 mm High, this 1.8-metre refrigerated prep counter combines an expansive 785.3-litre gross capacity (542.1L net volume / 508L undercounter storage) two-door refrigerated cabinet with an integrated top well holding 9 x 1/3 Gastronorm (GN) pans (pans included standard), providing multi-chef prep capability for rolling dough, saucing bases, and dressing pizzas during peak service rushes.

Engineered to perform in hot, demanding Australian kitchen conditions, the TPB1800 maintains stable food preservation temperatures between +2°C and +8°C governed by an industry-standard Dixell digital temperature controller. Built with a commercial stainless steel interior and exterior, insulated hinged and removable stainless steel top covers, a full-length removable polyethylene (PE) food prep board, self-closing solid doors with ergonomic inset handles, and an energy-efficient 500W power draw operating on a standard Australian 10-Amp plug, this prep bench delivers commercial durability backed by up to 4 years of warranty coverage.

Why Australian pizzerias, cafés, and restaurants choose the Thermaster TPB1800:

• Integrated 9 x 1/3 GN top ingredient well (pans included): Comes factory-supplied complete with nine 1/3 Gastronorm pans, providing ample variety and capacity for mozzarella, pizza sauces, cured meats, sliced vegetables, and fresh herbs right at the prep pass.

• Insulated hinged & removable stainless steel lids: Heavy-duty insulated top covers lock in cold temperatures over open ingredient pans between orders, reduce compressor run times overnight, and lift off easily for thorough sanitation.

• Full-length removable PE prep cutting board: Outfitted with an extra-wide, food-grade polyethylene preparation board running the entire 1.8-metre bench width, giving pizza chefs a hygienic, knife-safe work surface for stretching dough, assembling pizzas, and slicing calzones.

• Expansive 2-door undercounter cold storage: Provides 508 litres of refrigerated backup holding beneath the prep deck fitted with internal wire shelving tiers plus the reinforced floor, keeping backup dough trays, cheese blocks, and prepped ingredients chilled right at the station.

• Precision Dixell digital temperature controller: High-grade Italian Dixell thermostat features an external digital LED readout for instantaneous temperature verification and precise climate management.

• Automated cycle defrost & self-evaporating drainage: Automated defrost cycles prevent coil freezing, while an integrated condensate evaporation system eliminates the need for manual drip trays or external drainage plumbing.

• Commercial stainless steel build with coved corners: Heavy-duty commercial stainless steel interior and exterior with an alloy back panel, paired with seamless rounded interior chamber corners to simplify end-of-shift sanitisation and comply with Australian Food Safety Standard 3.2.2 (AS 4674).

• Self-closing doors with ergonomic inset handles: Two solid hinged doors feature inset handles and heavy-duty, easily replaceable magnetic perimeter gaskets that seal cold air in during fast-paced service shifts.

• True plug-and-play 10A operation: Rated at an energy-efficient 500W on a standard Australian 240V single-phase 10-Amp power supply, allowing instant connection to ordinary commercial wall sockets without specialized wiring.

• Heavy-duty mobility on lockable castors: Mounted standard on commercial swivelling castors (with front locking brakes), enabling staff to roll the 185 kg workstation out effortlessly for floor sweeping and sanitising.

• Up to 4-year commercial warranty coverage: Protected by an Australian standard 2-Year parts and labour commercial warranty, extendable to an additional 2-Year parts-only warranty upon product registration within 14 days of invoice.

Technical Specifications

Daily Care, Maintenance & End-of-Shift Sanitisation

To protect refrigeration efficiency, maintain prep board hygiene, and comply with Australian Food Safety Standards:

1. Polyethylene Prep Board Sanitisation: At the conclusion of service, lift off the removable PE cutting board. Scrub thoroughly in a commercial wash sink with warm water, a food-safe detergent, and an approved sanitising solution. Allow it to air-dry completely before reseating it on the bench to prevent moisture build-up beneath the board.

2. Top Well & Pan Management: Remove all 9 x 1/3 GN pans at the close of trade and transfer remaining toppings into sealed food storage containers inside a walk-in cold room or upright storage fridge. Wipe down the stainless steel pan well cavity with a damp cloth and sanitiser, ensuring no loose cheese shreds, flour dust, or sauce residue obstruct internal cooling air paths.

3. Internal Stainless Steel Chamber Washdown: Clear stock from the undercounter cavity and wipe down the stainless steel base deck, coved hygiene corners, and internal wire shelving using warm soapy water and a neutral sanitiser. Avoid using carbon steel wire wool, metal scrapers, or harsh chlorine bleaches that can pit or corrode stainless steel surfaces.

4. Door Gasket Inspection & Care: Wipe the magnetic rubber door gaskets daily with a soft damp cloth to clear sauce splatters, oils, and flour paste. Clean, supple gaskets ensure an airtight thermal seal that prevents refrigeration leakage.

5. Condenser Air Intake Dust Removal: To maintain rapid pull-down speeds and lower energy costs, inspect the compressor ventilation grille monthly. Clear accumulated flour dust, lint, and floor grime from the condenser fins using a soft-bristle brush or commercial vacuum cleaner.

Commercial Installation & Placement Guidelines

1. Standard 10A Electrical Connection: The Thermaster TPB1800 operates on standard Australian 240V single-phase power and comes factory-fitted with an Australian standard 10-Amp plug (drawing 500W). Connect directly to a dedicated wall socket on an unshared, surge-protected circuit; avoid using domestic multi-boards or light-duty extension leads.

2. Pre-Chilling Requirement for Food Safety: Top pan wells are holding stations designed to maintain cold food temperatures; all pizza toppings and ingredients must be pre-chilled to below +5°C in walk-in cool rooms or storage fridges before loading into the top 1/3 GN pans.

3. Insulated Lid Management: Keep the insulated stainless steel top lids closed during prep downtime, between order rushes, and overnight. Leaving the well open continuously will allow ambient kitchen heat to penetrate the food pans, leading to rising ingredient temperatures and potential coil icing.

4. Mandatory Airflow Clearances: Maintain at least 100mm of clearance around the compressor ventilation vents to allow warm condenser exhaust to dissipate freely into the kitchen.

5. Stationary Commercial Use Only: This unit is specifically engineered for stationary commercial kitchen installations and is not suitable for use in mobile environments, including food trucks, trailers, or mobile catering vans.

6. Surface Levelling & Castor Brakes: Roll the unit into position on a level, structurally sound commercial floor and engage the front castor locking brakes to prevent shifting during active dough rolling and prep work.

Freight, Delivery & Commercial Site Access Notice

Standard commercial road freight delivery is available Australia-wide to registered business premises equipped with ground-floor street access or dedicated loading dock/forklift facilities.

Please note: Because this commercial pizza prep bench spans 1798mm in length, 820mm in depth, and has a net weight of 185 kg, deliveries to residential premises, domestic addresses, or regional sites requiring a hydraulic tail-lift truck require a specialised freight quote. Prior to placing your order, please verify that entry doorways, hallways, and kitchen access paths accommodate a minimum width clearance of 850 mm and an unboxed transit length of over 1.8 metres. Please contact our friendly commercial sales team prior to ordering to coordinate transport logistics or verify site delivery access.

Frequently Asked Questions

Are the 9 x 1/3 Gastronorm pans included with the TPB1800?

Yes. Unlike many commercial prep counters where pans must be purchased separately, the Thermaster TPB1800 comes factory-supplied complete with nine 1/3 GN pans ready to insert directly into the top well.

What is the functional difference between the TPB1800 and the TPB1200?

Both models share heavy-duty stainless steel builds, Dixell digital controls, and plug-and-play 10A operation. The TPB1800 spans 1798mm in width with two doors, 508L of undercounter refrigeration, and 9 x 1/3 GN pans, offering higher prep capacity for two chefs working side by side compared to the single-door, 6-pan TPB1200.

Can the polyethylene cutting board be removed for washing?

Yes. The full-length food-grade PE cutting board lifts off the stainless steel mounting brackets easily. This allows staff to carry the board straight to a commercial wash sink for scrubbing and sanitising after each shift.

Can this prep bench be installed in a food truck or mobile catering trailer?

No. The TPB1800 is engineered strictly for stationary commercial kitchen premises. Vibrations and motion experienced during mobile transit can damage internal copper refrigeration lines and void manufacturer warranty coverage.

How do I activate the extended 4-year warranty coverage?

The TPB1800 comes standard with an Australian 2-Year parts and labour commercial warranty. Venue operators who register their equipment purchase online with the manufacturer within 14 days of the original invoice date receive an additional 2-Year parts-only warranty extension, providing a total of 4 years of comprehensive commercial protection across Australia.

N.B Image is for illustrative purposes only.  Specifications are subject to change without notice.