Blizzard SN-258F 250kg Granular Ice Maker with 125kg Bin | 10A

[BLIZZARD_MSG]

The Blizzard SN-258F 250kg Commercial Granular Ice Machine with 125kg Storage Bin is a high-yield, modular flake ice production system engineered specifically for Australian seafood retailers, supermarket wet displays, healthcare facilities, cocktail lounges, and food manufacturing lines. Measuring 560 mm Wide x 860 mm Deep x 1795 mm High and weighing 113 kg, this space-efficient modular unit pairs an industrial-grade freezing head with an insulated 125kg storage bin. Delivering up to 250kg of high-hardness granular flake ice every 24 hours, the SN-258F is powered by premier international refrigeration components—including German ebm-papst condenser fans, an automated Hisakage PLC control system, a Danish Danfoss expansion valve and air filter, Japanese Saginomiya solenoid and hydraulic valves, and a heavy-duty US Morrill water circulation pump. Officially WaterMark certified for legal connection to Australian municipal mains plumbing, it delivers water-saving air-cooled performance on a standard single-phase 10A plug-and-play electrical connection.

Why commercial operators choose the Blizzard SN-258F:

• High-volume granular output (up to 250kg/24h) — continuous-extrusion freezing cylinder generates up to 250kg of granular flake ice per day to easily manage morning display setups, high-turnover seafood replenishment, and banquet prep.

• Massive 125kg insulated storage bin — heavy-duty polyurethane-insulated bin holds up to 125kg of reserve ice ready for rapid service, protected by automated bin level sensors to prevent overfilling and reduce melt loss.

• Mouldable, high-hardness granular flake ice — produces dense, slow-melting granular ice that packs smoothly around whole fish, oysters, meat cuts, salad bowls, and wine bottles, offering maximum surface contact and superior display life without bruising delicate produce.

• Space-saving 560mm modular footprint — narrow 560mm width integrates seamlessly into tight kitchen prep lines, back-bar servery stations, or processing floors where floor area is at a premium.

• Full Australian WaterMark certification — independently tested and certified under the WaterMark scheme, guaranteeing full compliance with AS/NZS 3500 national plumbing standards and council health regulations.

• World-class global engineering components — precision-fitted with German ebm-papst fan motors, a Hisakage PLC digital controller, a US Morrill water pump, a Danish Danfoss expansion valve, and Japanese Saginomiya valves for maximum commercial uptime.

• Hygienic commercial stainless steel cabinet — heavy-gauge food-grade stainless steel body with a durable hinged access door resists corrosion, daily bumps, and harsh sanitising agents while wiping clean effortlessly.

• Eco-conscious air-cooled condensing — efficient air-cooled refrigeration system rejects heat through ambient airflow, eliminating the high water consumption and utility costs associated with water-cooled systems.

• Standard 10A plug-and-play installation — energy-efficient 1180W power consumption operates on standard Australian single-phase 240V mains power with a factory-fitted 10 Amp plug, requiring no 15A electrical circuit alterations.

Technical Specifications

Essential Water Filtration & Warranty Compliance

Commercial granular and flake ice machines operate via mechanical scraping and continuous extrusion inside a vertical evaporator cylinder. In hard-water areas across Australia, dissolved mineral salts and limescale accumulate on the freezing surface over time, leading to mechanical drag on the auger, reduced ice output, and premature evaporator wear.

Mandatory Warranty Requirement: An approved commercial inline water filter system (such as the WFI37000 Commercial Water Filtration System) must be installed upon setup to protect the internal freezing cylinder, prevent scale accumulation, and validate your 2-Year parts and labour warranty coverage.

Follow this essential 6-monthly preventative maintenance program:

1. Evaporator Cylinder De-scaling: Remove scale, lime, and mineral buildup from the evaporator cylinder, auger assembly, and water distribution system using an approved commercial food-grade descaler.

2. Sanitisation: Thoroughly clean and sanitise the internal water reservoir, water supply lines, ice drop chute, and the 125kg storage bin interior using an approved food-contact sanitiser.

3. Condenser & Fan Care: Clean and vacuum the air-cooled condenser coils; inspect the German ebm-papst fan motor and blades for smooth operation and unobstructed airflow.

4. Water Line & Filter Replacement (Every 6 Months): Inspect water inlet valves, floats, and strainers, and replace the inline water filter cartridge (WFI37000) bi-annually to stop sediment and scale before it enters the freezing mechanism.

5. System Diagnostics: Test refrigerant operating pressures, inspect electrical contactors, verify water pump performance, and test sensor calibrations.

Plumbing, Operating & Service Notice

The Blizzard SN-258F requires direct connection to a cold potable mains water line terminating at an isolation tap (operating between 100 kPa and 500 kPa) and an unpressurised gravity floor waste drain with an approved physical air gap. Ensure the drainage line runs continuously downhill without upward loops to allow meltwater from the 125kg storage bin to evacuate freely. Provide at least 150 mm of ventilation clearance around the air-cooled condenser grilles on the modular head to guarantee adequate airflow and heat rejection. Always connect the unit directly to a dedicated 240V 10A wall power point; never use double adaptors, multi-plug power boards, or extension leads.

Freight & Delivery Notice

Standard commercial freight delivery is available across Australia. Due to the modular dual-box configuration (modular ice-making head plus separate storage bin) and a total weight of 113 kg, delivery to non-commercial or residential addresses requires a customised tail-lift freight calculation. Please contact our friendly commercial sales team prior to placing your order to verify site access, doorway clearances, and delivery arrangements.

Frequently Asked Questions

What are the main commercial uses for granular flake ice?

Granular flake ice features an irregular, soft-yet-dense texture with high surface-area contact. It moulds tightly around products without sharp edges that could puncture or mark delicate produce. It is the preferred choice for seafood retail beds, supermarket deli displays, salad bars, cold buffet presentations, therapeutic ice therapy in physiotherapy and healthcare clinics, and fast-chilling cocktail preparations.

How does the Blizzard SN-258F differ from the Blizzard SN-258N?

Both machines share the same 560mm-wide modular footprint, 125kg storage bin, and 250kg daily capacity. The key distinction lies in the ice type produced: the SN-258F produces mouldable granular flake ice designed for seafood displays, cold beds, and rapid chilling, whereas the SN-258N compresses ice flakes into chewable, soft cylindrical nuggets (chewblet ice) tailored for blended drinks, cocktails, and healthcare patient hydration.

Why is an inline water filter mandatory for warranty protection?

Granular ice machines rely on an internal rotating stainless steel auger inside an evaporator barrel. When unconditioned mains water freezes, minerals drop out of suspension and coat the internal barrel walls with abrasive limescale. This scale increases mechanical friction against the auger, placing excessive load on the drive motor and gearbox. Installing an approved inline water filter (such as the WFI37000) inhibits scale formation and is a mandatory requirement to keep the 2-Year warranty valid.

Does the Blizzard SN-258F require a gravity floor waste drain?

Yes. The SN-258F uses gravity drainage to evacuate condensation and bin meltwater. It must be positioned near a suitable floor waste, tundish, or drain outlet installed with an approved physical air gap in compliance with Australian plumbing standard AS/NZS 3500.

What electrical outlet is required?

The Blizzard SN-258F draws an energy-efficient 1180W on standard Australian single-phase 240V power. It comes factory-fitted with a standard Australian 10 Amp plug and lead, allowing immediate plug-and-play installation into any standard commercial power socket without requiring 15A electrical circuit upgrades.

N.B Images are for illustrative purposes only. Specifications are subject to change without notice.