Thermaster SC248SD 900mm 2 Sliding Glass Door Underbar Cooler 202L | 10A

[THERMASTER_MSG]

The Thermaster SC248SD Commercial 900mm 2 Sliding Glass Door Underbench Bar Display Cooler is a space-efficient back-bar beverage refrigerator engineered specifically for Australian commercial pubs, boutique hotel lounges, clubs, restaurants, licensed cafés, and busy hospitality venues where aisle space is at a premium. Measuring 900 mm Wide x 535 mm Deep x 900 mm High (dropping to an undercounter height of 880 mm with castors removed), this 202-litre underbench showcase features smooth-gliding double sliding doors that eliminate outward door swings, keeping service walkways and cramped bar aisles completely unobstructed during peak trading rushes.

Powered by a premium Zanussi commercial compressor paired with a dynamic fan-forced evaporator air circulation system, the SC248SD maintains precise holding temperatures between +2°C and +8°C in ambient conditions up to +32°C at 75% relative humidity. Built with a durable black Colorbond exterior casing, double-glazed self-closing sliding glass doors with an integrated key lock, brilliant internal illumination, two fully adjustable heavy-duty industrial wire shelves, and an ultra-efficient 112W power draw running on a standard 10A Australian plug, the Thermaster SC248SD combines front-of-house merchandising appeal with dependable underbench commercial performance.

Why Australian pubs, bars, and restaurants choose the Thermaster SC248SD:

• Space-saving double sliding glass doors: Smooth-gliding sliding doors slide horizontally rather than swinging outward into service corridors, preventing counter bottlenecks and collisions in narrow bartender walkways.

• Engineered underbench profile (880mm without castors): Removing the pre-fitted castors reduces total cabinet height from 900mm down to 880mm, ensuring a neat, flush fit beneath standard commercial bar counters, bench overhangs, and speed rails.

• Premium Zanussi compressor performance: Fitted with an industrial-grade Zanussi hermetic compressor that delivers rapid thermal pull-down, low energy consumption (2.002 kWh/24h), and long-term mechanical reliability across heavy service trade.

• Dynamic fan-forced air cooling: High-velocity internal evaporator fans continuously circulate chilled air around bottles and cans, eliminating warm dead zones and ensuring drinks pulled from any shelf tier are ice-cold.

• Double-glazed self-closing glass doors: Dual-pane tempered safety glass minimizes ambient heat infiltration and surface condensation, while internal gravity/spring returns ensure doors slide fully closed to conserve refrigeration energy.

• Integrated cylinder key lock: Built-in central sliding door lock keeps high-value craft spirits, specialty wines, and premium beverage stock secure during unmonitored shifts or after-hours lockup.

• Vibrant internal product illumination: Energy-saving interior lighting casts an even, glare-free glow over beverage labels, guiding bartenders quickly and driving lucrative point-of-sale customer impulse choices.

• Heavy-duty adjustable shelving: Outfitted with two levels of industrial-coated wire shelves plus the reinforced cabinet base floor, allowing bar managers to customize vertical clearances for standing tall longnecks, upright wine bottles, or double-stacked stubbies.

• Intuitive digital temperature controller: Front-facing digital thermostat with a real-time LCD readout allows bar staff to monitor holding conditions at a glance, backed by an automated cycle defrost system that keeps coils frost-free.

• Durable black Colorbond construction: High-grade black Colorbond exterior casing resists corrosive bar spills, acidic fruit garnishes, and daily scuffs, allowing quick, hygienic end-of-shift wipe-downs.

• Ultra-efficient 10A plug-and-play operation: Consuming just 112W, this eco-efficient unit plugs directly into any standard Australian 240V 10-Amp wall outlet without requiring specialized electrical circuits.

• Up to 4-year warranty protection: Backed by an Australian standard 2-Year commercial parts and labour warranty, extendable to an additional 2-Year parts-only warranty upon product registration within 14 days of invoice.

Technical Specifications

Daily Care, Maintenance & End-of-Shift Sanitisation

To protect refrigeration efficiency, maintain glass clarity, and comply with Australian Food Safety Standards:

1. Sliding Glass Door Track Clearance: Dust, dried syrup, and beverage residue naturally settle into sliding door bottom tracks. Vacuum or wipe the roller guide channels daily with a damp cloth to ensure the sliding rollers glide smoothly and seal shut automatically.

2. Glass Door Care & Polishing: Clean the inner and outer double-glazed sliding glass panels daily using a soft microfibre cloth and a neutral, non-ammonia commercial glass cleaner. Avoid harsh abrasive scouring pads, steel wool, or abrasive creams that can scratch the glass panes.

3. Door Gasket & Brush Seal Sanitisation: Wipe down the perimeter rubber seals and vertical brush seals with a soft damp cloth to clear sticky beer froth, sugary syrup residues, and grime. Keeping seals clean ensures an airtight barrier that stops refrigerated air from leaking.

4. Internal Cavity Wipe-Down: At the close of trade, clear out stock and wipe down the base floor and adjustable wire shelves using warm water and a neutral, food-safe commercial detergent or sanitiser. Wipe dry thoroughly before reloading beverages to prevent condensation marks.

5. Condenser Air Intake Dust Removal: To maintain rapid chilling performance and keep energy consumption low in busy bar environments, inspect the lower compressor grille monthly. Clear accumulated dust, lint, and bar floor debris from the condenser fins using a soft-bristle brush or commercial vacuum cleaner.

Commercial Installation & Placement Guidelines

1. Standard 10A Electrical Connection: The Thermaster SC248SD operates on standard Australian 240V single-phase power and comes factory-fitted with an Australian standard 10-Amp plug. Connect directly to a dedicated wall socket on an unshared circuit; avoid the use of domestic multi-boards or light-duty extension cables.

2. Underbench Counter Fitment: When sliding the fridge beneath a fixed commercial bar counter, unscrew and remove the pre-fitted castors. This lowers the total cabinet height to 880mm, ensuring adequate vertical clearance beneath standard 900mm hospitality benchtops.

3. Mandatory Airflow Clearance: Maintain a minimum rear and side perimeter clearance of 100mm from solid walls or adjoining cabinetry. Unobstructed airflow around the condenser housing is required to dissipate heat effectively and prevent compressor thermal overload.

4. Separation from Heat Sources: Avoid positioning the bar cooler immediately adjacent to commercial dishwashers, glass washers, ice machines, or high-heat cooking equipment. Hot exhaust discharge from adjacent appliances will raise ambient operating temperatures and increase running costs.

5. Level Surface Calibration: Ensure the unit sits completely level across both horizontal planes using a spirit level. Correct levelling is critical for sliding door alignment, ensuring the self-closing mechanism functions properly and defrost water drains into the internal evaporation tray.

Freight, Delivery & Commercial Site Access Notice

Standard commercial road freight delivery is available Australia-wide to registered business premises equipped with ground-floor street access or dedicated loading dock/forklift facilities.

Please note: Because this commercial bar cooler has a shipping weight of approximately 60 kg and ships strapped to a protective transport pallet, deliveries to residential premises, domestic addresses, or regional sites requiring a hydraulic tail-lift truck require a customised freight quote. Prior to placing your order, verify that bar gates, doorways, and hallway paths provide a minimum clear width clearance of 600 mm. Please contact our friendly commercial sales team prior to ordering to coordinate transport access, confirm delivery logistics, or enquire about package quotes across our wider commercial bar refrigeration range.

Frequently Asked Questions

What is the functional difference between the SC248SD and the SC248G?

Both units feature identical 202-litre capacities, Zanussi compressors, and underbench height profiles (880mm without castors). The SC248SD features horizontal sliding glass doors, making it suitable for narrow bar walkways where opening a hinged door would block staff movement. The SC248G features traditional hinged glass doors.

Can the height of the Thermaster SC248SD be lowered to fit beneath low bar counters?

Yes. While the unit stands 900mm tall with its factory-fitted castors, the castors can be removed to reduce the total cabinet height down to 880mm. This makes it suitable for sliding beneath standard 900mm commercial bar benchtops while leaving appropriate operational clearance.

How many bottles or cans can the SC248SD hold?

With a gross capacity of 202 litres (133L net), the unit comfortably accommodates approximately 180 to 200 standard 330ml/375ml beer stubbies or beverage cans when utilizing both adjustable wire shelves alongside the reinforced bottom base tier.

Are the sliding doors lockable for after-hours security?

Yes. The double-glazed sliding glass doors feature an integrated central cylinder lock located on the overlapping door frame. Two keys are supplied standard to keep stock secure after trading hours.

How do I qualify for the extended 4-year warranty coverage?

This bar cooler comes standard with an Australian 2-Year commercial parts and labour warranty. Venue operators who register their equipment purchase online with the manufacturer within 14 days of the original invoice date receive an additional 2-Year parts-only warranty extension, giving a total of 4 years of comprehensive commercial protection across Australia.

N.B Image is for illustrative purposes only. Specifications are subject to change without notice.