Thermaster SC248G 900mm 2-Door Underbench Bar Cooler 202L | Black Colorbond

[THERMASTER_MSG]

The Thermaster SC248G Commercial 900mm 2-Door Underbench Bar Display Cooler is a heavy-duty, high-visibility back-bar beverage refrigerator engineered specifically for Australian commercial pubs, clubs, hotel bars, restaurants, licensed cafés, and bustling hospitality venues. Measuring 900 mm Wide x 535 mm Deep x 900 mm High (reducing to an ultra-compact 880 mm high with castors removed), this 202-litre undercounter showcase provides dependable cold-holding storage for craft beers, ciders, RTDs, white wines, and mixers within a space-saving 900mm footprint.

Powered by a premium Zanussi commercial compressor paired with a dynamic fan-forced evaporator air circulation system, the SC248G maintains precise holding temperatures between +2°C and +8°C in ambient conditions up to +32°C at 75% relative humidity. Built with a durable black Colorbond exterior casing, double-glazed self-closing hinged glass doors with independent key locks, vibrant internal illumination, two fully adjustable heavy-duty industrial wire shelves, and an ultra-efficient 112W power draw running on a standard 10A Australian plug, the Thermaster SC248G combines front-of-house merchandising appeal with dependable underbench commercial performance.

Why Australian pubs, bars, and restaurants choose the Thermaster SC248G:

• Engineered underbench profile (880mm without castors): Removing the pre-fitted castors reduces total cabinet height from 900mm down to 880mm, ensuring a neat, flush fit beneath standard commercial bar counters, bench overhangs, and speed rails.

• Premium Zanussi compressor performance: Fitted with an industrial-grade Zanussi hermetic compressor that delivers rapid thermal pull-down, high energy efficiency (1.931 kWh/24h), and long-term mechanical reliability across heavy service trade.

• Dynamic fan-forced air cooling: High-velocity internal evaporator fans continuously circulate chilled air around bottles and cans, eliminating warm dead zones and ensuring drinks pulled from any shelf tier are ice-cold.

• Double-glazed self-closing glass doors: Dual-pane tempered safety glass minimizes ambient heat infiltration and surface condensation, while the integrated self-closing hinges stop staff from accidentally leaving doors ajar during hectic service rushes.

• Integrated cylinder key locks: Both hinged glass doors feature keyed security locks, protecting high-value craft spirits, specialty wines, and premium stock during unmonitored shifts or after-hours lockup.

• Vibrant internal product illumination: Energy-saving interior lighting casts an even, glare-free glow over beverage labels, guiding bartenders quickly and driving lucrative point-of-sale customer impulse choices.

• Heavy-duty adjustable shelving: Outfitted with two levels of industrial-coated wire shelves plus the reinforced cabinet base floor, allowing bar managers to customize vertical clearances for standing tall longnecks, upright wine bottles, or double-stacked stubbies.

• Intuitive digital temperature controller: Front-facing digital thermostat with a real-time LCD readout allows bar staff to monitor holding conditions at a glance, backed by an automated cycle defrost system that keeps coils frost-free.

• Durable black Colorbond construction: High-grade black Colorbond exterior casing resists corrosive bar spills, acidic fruit garnishes, and daily scuffs, allowing quick, hygienic end-of-shift wipe-downs.

• Ultra-efficient 10A plug-and-play operation: Consuming just 112W, this eco-efficient unit plugs directly into any standard Australian 240V 10-Amp wall outlet without requiring specialized electrical circuits.

• Up to 4-year warranty protection: Backed by an Australian standard 2-Year commercial parts and labour warranty, extendable to an additional 2-Year parts-only warranty upon product registration within 14 days of invoice.

Technical Specifications

Daily Care, Maintenance & End-of-Shift Sanitisation

To protect refrigeration efficiency, maintain glass clarity, and comply with Australian Food Safety Standards:

1. Glass Door Care & Polishing: Clean the inner and outer double-glazed glass panels daily using a soft microfibre cloth and a neutral, non-ammonia commercial glass cleaner. Avoid harsh abrasive scouring pads, steel wool, or abrasive creams that can scratch the glass panes or damage the rubber door gaskets.

2. Door Gasket Inspection & Sanitisation: Wipe down the perimeter magnetic rubber gaskets with a soft damp cloth to clear sticky beer froth, sugary syrup residues, and grime. Keeping gaskets clean ensures an airtight thermal seal that stops refrigerated air from leaking.

3. Internal Cavity Wipe-Down: At the close of trade, clear out stock and wipe down the base floor and adjustable wire shelves using warm water and a neutral, food-safe commercial detergent or sanitiser. Wipe dry thoroughly before reloading beverages to prevent condensation marks.

4. Condenser Air Intake Dust Removal: To maintain rapid chilling performance and keep energy consumption low in busy bar environments, access the lower compressor grille monthly. Clear accumulated dust, lint, and bar floor debris from the condenser fins using a soft-bristle brush or commercial vacuum cleaner.

5. Drainage Trough Verification: Periodically check the internal condensate drainage channel at the back of the cabinet to ensure defrost run-off water flows freely without blockages from stray bottle cap wrappers or pulp debris.

Commercial Installation & Placement Guidelines

1. Standard 10A Electrical Connection: The Thermaster SC248G operates on standard Australian 240V single-phase power and comes factory-fitted with an Australian standard 10-Amp plug. Connect directly to a dedicated wall socket on an unshared circuit; avoid the use of domestic multi-boards or light-duty extension cables.

2. Underbench Counter Fitment: When sliding the fridge beneath a fixed commercial bar counter, unscrew and remove the pre-fitted castors. This lowers the total cabinet height to 880mm, ensuring adequate vertical clearance beneath standard 900mm hospitality benchtops.

3. Mandatory Airflow Clearance: Maintain a minimum rear and side perimeter clearance of 100mm from solid walls or adjoining cabinetry. Unobstructed airflow around the condenser housing is required to dissipate heat effectively and prevent compressor thermal overload.

4. Separation from Heat Sources: Avoid positioning the bar cooler immediately adjacent to commercial dishwashers, glass washers, ice machines, or high-heat cooking equipment. Hot exhaust discharge from adjacent appliances will raise ambient operating temperatures and increase running costs.

5. Level Surface Calibration: Ensure the unit sits completely level across both horizontal planes using a spirit level. Correct levelling guarantees that the self-closing door hinges swing shut properly and allows internal defrost condensation to drain into the evaporator tray.

Freight, Delivery & Commercial Site Access Notice

Standard commercial road freight delivery is available Australia-wide to registered business premises equipped with ground-floor street access or dedicated loading dock/forklift facilities.

Please note: Because this commercial bar cooler has a packed shipping weight of approximately 80 kg and ships strapped to a protective transport pallet, deliveries to residential premises, domestic addresses, or regional sites requiring a hydraulic tail-lift truck require a customised freight quote. Prior to placing your order, verify that bar gates, doorways, and hallway paths provide a minimum clear width clearance of 600 mm. Please contact our friendly commercial sales team prior to ordering to coordinate transport access, confirm delivery logistics, or enquire about package quotes across our wider commercial bar refrigeration range.

Frequently Asked Questions

Can the height of the Thermaster SC248G be lowered to fit beneath low bar counters?

Yes. While the unit stands 900mm tall with its factory-fitted castors, the castors can be removed to reduce the total cabinet height down to 880mm. This makes it suitable for sliding beneath standard 900mm commercial bar benchtops while leaving appropriate operational clearance.

What is the difference between the SC248G and the SC248SG?

Both models share identical internal dimensions, Zanussi compressors, double-glazed glass doors, and 202L capacities. The SC248G features a durable black Colorbond exterior casing, whereas the SC248SG features an all-stainless steel exterior body.

How many bottles or cans can the SC248G hold?

With a gross capacity of 202 litres (133L net), the unit comfortably accommodates approximately 180 to 200 standard 330ml/375ml beer stubbies or beverage cans when utilizing both adjustable wire shelves alongside the reinforced bottom base tier.

Are the doors lockable for after-hours security?

Yes. Both double-glazed hinged glass doors feature independent, factory-fitted cylinder key locks located at the base of the door frames. Two sets of keys are supplied standard to keep valuable beverages secure after trading hours.

How do I qualify for the extended 4-year warranty coverage?

This bar cooler comes standard with an Australian 2-Year commercial parts and labour warranty. Venue operators who register their equipment purchase online with the manufacturer within 14 days of the original invoice date receive an additional 2-Year parts-only warranty extension, giving a total of 4 years of comprehensive commercial protection across Australia.

N.B Image is for illustrative purposes only. Specifications are subject to change without notice.