Thermaster BC4100G 2542mm 4-Door Underbench Bar Cooler 698L | Black Magic R290

[THERMASTER_MSG]

The Thermaster BC4100G Deluxe Series "Black Magic" Commercial 2542mm 4-Door Underbench Bar Display Cooler is a flagship, high-capacity commercial beverage refrigerator engineered specifically for high-volume Australian pubs, sports bars, night clubs, hotel lounges, busy bistros, and large hospitality entertainment venues. Measuring an extra-wide 2542 mm Wide x 513 mm Deep with a low-profile 860 mm undercounter height, this expansive 698-litre gross capacity (484L net volume) showcase delivers high beverage stock holding across four hinged glass display doors while fitting under standard commercial bar counters.

Powered by an industrial-grade Embraco commercial compressor charged with eco-friendly R290 natural refrigerant, the BC4100G pairs high thermodynamic cooling speed with low power consumption (4.079 kWh/24h). Its dynamic fan-forced evaporator air circulation system maintains precise holding temperatures between +2°C and +8°C even in demanding Australian service climates. Built in a sleek black Colorbond exterior casing with double-glazed self-closing hinged glass doors, cylinder key security locks, brilliant internal illumination, heavy-duty adjustable stainless steel industrial shelving, and fitted castors that allow the unit to roll out for routine cleaning and maintenance, the Thermaster BC4100G provides a professional back-bar display solution for high-turnover hospitality operations.

Why Australian pubs, clubs, and high-volume bars choose the Thermaster BC4100G:

• Massive 698-litre 4-door merchandise capacity: Extra-wide 2.5-metre frontage provides extensive product facings across four door bays, allowing busy bartenders to stock hundreds of craft beers, ciders, RTDs, premium wines, and mixers without mid-shift restocking delays.

• Low-profile underbench height (860mm): Engineered specifically with an 860mm overall height profile on castors, sliding effortlessly beneath standard 900mm Australian commercial bar benchtops, cocktail stations, and speed rails.

• World-class Embraco compressor performance: Equipped with a genuine Embraco commercial compressor designed for rapid thermal recovery during relentless service rushes and continuous door openings.

• Eco-friendly R290 natural refrigerant: Charged with natural hydrocarbon R290 refrigerant (low GWP, zero ODP), delivering superior thermodynamic heat transfer, lower carbon emissions, and reduced daily energy costs.

• Dynamic fan-forced convective cooling: High-velocity internal evaporator fans continuously circulate chilled air across every tier, eliminating warm dead zones and ensuring drinks pulled from any bay are served ice-cold.

• Double-glazed self-closing glass doors: Dual-pane tempered safety glass acts as a thermal barrier against room heat and condensation, while spring-assisted self-closing hinges prevent doors from being left ajar during fast-paced service.

• Independent cylinder key locks: All four hinged doors feature dedicated cylinder key locks to protect top-shelf spirits, reserve wines, and high-value stock during unmonitored shifts or after hours.

• Stainless steel industrial shelving: Heavy-duty, fully adjustable stainless steel wire shelves resist corrosion from spilled beverages and acidic garnishes, offering solid support for standing longnecks or stacked cans.

• Intuitive digital temperature controller: Front-facing digital thermostat with a real-time display ensures accurate temperature monitoring, backed by an automated cycle defrost system that keeps evaporator coils frost-free.

• Slide-open accessibility for routine maintenance: The unit is engineered for easy access, allowing staff and technicians to slide open service compartments for straightforward cleaning and preventative maintenance.

• Commercial mobility on fitted castors: Heavy-duty multidirectional castors enable smooth rolling for floor sanitisation beneath the bar and hassle-free positioning during installation.

• Standard 10A plug-and-play efficiency: Consuming just 320W on a standard Australian 240V single-phase 10-Amp power supply, this unit plugs directly into standard commercial wall sockets.

• Up to 4-year commercial warranty protection: Backed by an Australian standard 2-Year parts and labour commercial warranty, extendable to an additional 2-Year parts-only warranty upon product registration within 14 days of invoice.

Technical Specifications

Daily Care, Maintenance & End-of-Shift Sanitisation

To protect refrigeration efficiency, maintain glass clarity, and comply with Australian Food Safety Standards:

1. Glass Door Care & Polishing: Clean the inner and outer double-glazed glass panels daily using a soft microfibre cloth and a neutral, non-ammonia commercial glass cleaner. Avoid harsh abrasive scouring pads, wire wool, or abrasive creams that can scratch the glass panes or damage the rubber door gaskets.

2. Door Gasket Inspection & Sanitisation: Wipe down the perimeter magnetic rubber gaskets with a soft damp cloth to clear sticky beer froth, sugary cocktail syrups, and bar grime. Keeping gaskets clean ensures an airtight thermal seal that stops cold air from escaping.

3. Stainless Steel Shelves & Base Washdown: At the close of trade, wipe down the stainless steel shelves and cabinet base floor using warm water and a neutral, food-safe commercial detergent or sanitiser. Wipe dry thoroughly before restocking to prevent condensation marks under the interior lights.

4. Condenser Air Intake Dust Removal: To maintain rapid chilling performance and keep energy consumption low in busy bar environments, inspect the compressor ventilation grille monthly. Slide open the service compartment and clear accumulated dust, lint, and floor debris from the condenser fins using a soft-bristle brush or commercial vacuum cleaner.

5. Drainage Trough Verification: Periodically inspect the internal condensate drainage channel at the rear of the cabinet to ensure defrost run-off water flows freely without blockages from stray bottle cap wrappers or pulp debris.

Commercial Installation & Placement Guidelines

1. Standard 10A Electrical Connection: The Thermaster BC4100G operates on standard Australian 240V single-phase power and comes factory-fitted with an Australian standard 10-Amp plug (drawing 320W). Connect directly to a dedicated wall socket on an unshared, surge-protected circuit; avoid using domestic multi-boards or light-duty extension leads.

2. Underbench Counter Fitment: With an overall height of 860mm on its fitted castors, the unit is designed to slide directly beneath standard 900mm commercial bar counters, providing a clean built-in finish without needing to remove its wheels.

3. Mandatory Airflow Clearance: Maintain a minimum rear and side perimeter clearance of 100mm from solid walls or adjoining cabinetry. Unobstructed airflow around the compressor housing is required to dissipate heat effectively and prevent compressor thermal overload.

4. Separation from Heat Sources: Avoid positioning the bar cooler immediately adjacent to commercial glasswashers, dishwashers, ice machines, or high-heat cooking equipment. Hot exhaust discharge from adjacent appliances will raise ambient operating temperatures and increase running costs.

5. Level Surface Calibration: Ensure the unit sits completely level across both horizontal planes using a spirit level. Correct levelling guarantees that all four self-closing doors swing shut properly and allows internal defrost condensation to drain into the evaporator tray.

Freight, Delivery & Commercial Site Access Notice

Standard commercial road freight delivery is available Australia-wide to registered business premises equipped with ground-floor street access or dedicated loading dock/forklift facilities.

Please note: Because this commercial 4-door bar cooler spans 2542mm in length and has a net weight of 150 kg, deliveries to residential premises, domestic addresses, or regional sites requiring a hydraulic tail-lift truck require a specialised freight quote. Prior to placing your order, verify that bar gates, doorways, loading docks, and hallway pathways provide a minimum clear width clearance of 600 mm and can accommodate an unboxed length of over 2.6 metres. Please contact our friendly commercial sales team prior to ordering to coordinate transport access, confirm delivery logistics, or enquire about package quotes across our wider commercial bar refrigeration range.

Frequently Asked Questions

How many bottles or cans can the Thermaster BC4100G hold?

With a gross capacity of 698 litres (484L net volume) spanning four full-sized bays, the BC4100G comfortably accommodates approximately 600 to 700 standard 330ml/375ml beer stubbies or beverage cans when utilizing both tiers of adjustable stainless steel shelving alongside the reinforced bottom base floor.

Can this unit fit beneath standard Australian bar counters without modification?

Yes. Unlike many large commercial fridges that exceed 900mm in height, the BC4100G is purpose-built with an overall height of 860mm inclusive of its castors. This allows it to slide straight beneath standard 900mm commercial bar counters and speed rails without needing castor removal.

What are the operational advantages of Embraco compressors with R290 refrigerant?

Embraco is a world-leading manufacturer of high-efficiency commercial hermetic compressors. Paired with R290 natural refrigerant, this system achieves faster temperature pull-down and recovery during peak service while using up to 30–40% less electricity than older refrigerants, resulting in a low daily energy consumption of just 4.079 kWh/24h.

Are all four doors individually lockable?

Yes. Each of the four double-glazed hinged glass doors features an independent, factory-fitted cylinder key lock located at the base of the frame, ensuring valuable craft beers, premium wines, and spirits remain secure outside of trading hours.

How do I qualify for the extended 4-year warranty coverage?

The BC4100G comes standard with an Australian 2-Year commercial parts and labour warranty. Venue operators who register their equipment purchase online with the manufacturer within 14 days of the original invoice date receive an additional 2-Year parts-only warranty extension, providing a total of 4 years of comprehensive commercial protection across Australia.

N.B Images are for illustrative purposes only. Specifications are subject to change without notice.