FED-X S/S Four Drawer Sandwich Counter - XSS7C13S2V-4D
[GLOBAL_MSG]
Keep ingredient lines organised and speed up service during peak hours with the FED-X XSS7C13S2V-4D 282L 4 Drawer Stainless Steel Salad Prep Workbench Refrigerator. Purpose-built for busy salad bars, sandwich shops, pizzerias, and commercial cafes, this 1360mm-wide prep counter features an integrated top well that holds 7 x 1/3 GN pans (up to 150mm deep) directly above four heavy-duty pull-out storage drawers.
Built with a full stainless steel interior and exterior featuring coved internal corners for effortless sanitation, it incorporates high-end European components—including a Cubigel compressor, Dixell electronic controller, and ebm-papst fan motors. Tropicalized for demanding Australian conditions, it reliably maintains holding temperatures between +2°C and +8°C in high-ambient environments up to +43°C.
Key Benefits
-
Top Cutout Fits 7 x 1/3 GN Pans: Integrated top prep well holds up to seven 1/3 gastronorm pans (up to 150mm deep) for fast access to toppings, proteins, and prepped ingredients.
-
4 Heavy-Duty Storage Drawers: Multi-drawer layout enables organized, quick-grab ingredient access right at the prep line without reaching into deep lower cabinets.
-
Pre-Chilled Top Hold Time (Up to 4 Hours): Specially engineered top well design preserves prep ingredient temperatures for up to 4 hours from a pre-chilled environment during service peaks.
-
Tropicalised +43°C Ambient Rating: Heavy-duty refrigeration system engineered for Australian kitchen environments (up to +43°C ambient at 60% relative humidity) to ensure rapid temperature recovery.
-
Premium European Components: Powered by a Cubigel compressor, ebm-papst evaporator and condenser fans, and an intuitive Dixell digital controller.
-
Heavy-Duty Commercial Stainless Steel Build: Premium stainless steel housing with coved internal corners eliminates dirt traps for simple daily clean up.
-
Eco-Friendly R290 Refrigerant & 60mm Insulation: HFC- and CFC-free 60mm high-density foam insulation maximizes thermal efficiency while keeping energy draw low (320W / 10A).
-
Lockable Heavy-Duty Castors: Pre-installed castor wheels with front brakes enable smooth mobility for deep floor washdowns underneath and behind the unit.
Technical Specifications
| Feature | Specification |
| Brand / Model | FED-X XSS7C13S2V-4D |
| Gross / Net Volume | 282 Litres / 259 Litres |
| Gastronorm Top Well | Holds 7 x 1/3 GN Pans (up to 150mm deep) |
| Drawer Configuration | 4 Heavy-Duty Pull-Out Stainless Steel Drawers |
| External Dimensions (mm) | 1360 (W) x 700 (D) x 1406 (H) |
| Temperature Set Range | +2°C to +8°C |
| Cooling System | Dynamic Fan-Forced Cooling |
| Compressor / Controller | Cubigel Compressor / Dixell Digital Controls |
| Fans & Motors | ebm-papst Evaporator & Condenser Fans |
| Power Supply / Electrical | 240V / 50Hz / 320W (Standard 10A Plug) |
| Refrigerant Type | Eco-Friendly R290 |
| Insulation Thickness | 60 mm HFC & CFC Free Foam Insulation |
| Ambient Operating Rating | Approved for +43°C Ambient (60% Relative Humidity) |
| Net Weight | 104.0 kg |
| Warranty | 2 Years Parts & Labour (+ 2 Years Parts Only upon registration within 14 days of invoice) |
Delivery & Operational Notes
-
Residential Delivery: Freight to residential or non-commercial addresses requires a customised delivery quote. Please contact our sales team prior to ordering.
-
Extended Warranty: Standard warranty covers 2 Years Parts and Labour. Receive an additional 2 Years Parts-Only protection by registering your product online within 14 days of invoice.
N.B Images are for illustrative purposes only. Specifications are subject to change without notice.
[GLOBAL_MSG]
Keep ingredient lines organised and speed up service during peak hours with the FED-X XSS7C13S2V-4D 282L 4 Drawer Stainless Steel Salad Prep Workbench Refrigerator. Purpose-built for busy salad bars, sandwich shops, pizzerias, and commercial cafes, this 1360mm-wide prep counter features an integrated top well that holds 7 x 1/3 GN pans (up to 150mm deep) directly above four heavy-duty pull-out storage drawers.
Built with a full stainless steel interior and exterior featuring coved internal corners for effortless sanitation, it incorporates high-end European components—including a Cubigel compressor, Dixell electronic controller, and ebm-papst fan motors. Tropicalized for demanding Australian conditions, it reliably maintains holding temperatures between +2°C and +8°C in high-ambient environments up to +43°C.
Key Benefits
-
Top Cutout Fits 7 x 1/3 GN Pans: Integrated top prep well holds up to seven 1/3 gastronorm pans (up to 150mm deep) for fast access to toppings, proteins, and prepped ingredients.
-
4 Heavy-Duty Storage Drawers: Multi-drawer layout enables organized, quick-grab ingredient access right at the prep line without reaching into deep lower cabinets.
-
Pre-Chilled Top Hold Time (Up to 4 Hours): Specially engineered top well design preserves prep ingredient temperatures for up to 4 hours from a pre-chilled environment during service peaks.
-
Tropicalised +43°C Ambient Rating: Heavy-duty refrigeration system engineered for Australian kitchen environments (up to +43°C ambient at 60% relative humidity) to ensure rapid temperature recovery.
-
Premium European Components: Powered by a Cubigel compressor, ebm-papst evaporator and condenser fans, and an intuitive Dixell digital controller.
-
Heavy-Duty Commercial Stainless Steel Build: Premium stainless steel housing with coved internal corners eliminates dirt traps for simple daily clean up.
-
Eco-Friendly R290 Refrigerant & 60mm Insulation: HFC- and CFC-free 60mm high-density foam insulation maximizes thermal efficiency while keeping energy draw low (320W / 10A).
-
Lockable Heavy-Duty Castors: Pre-installed castor wheels with front brakes enable smooth mobility for deep floor washdowns underneath and behind the unit.
Technical Specifications
| Feature | Specification |
| Brand / Model | FED-X XSS7C13S2V-4D |
| Gross / Net Volume | 282 Litres / 259 Litres |
| Gastronorm Top Well | Holds 7 x 1/3 GN Pans (up to 150mm deep) |
| Drawer Configuration | 4 Heavy-Duty Pull-Out Stainless Steel Drawers |
| External Dimensions (mm) | 1360 (W) x 700 (D) x 1406 (H) |
| Temperature Set Range | +2°C to +8°C |
| Cooling System | Dynamic Fan-Forced Cooling |
| Compressor / Controller | Cubigel Compressor / Dixell Digital Controls |
| Fans & Motors | ebm-papst Evaporator & Condenser Fans |
| Power Supply / Electrical | 240V / 50Hz / 320W (Standard 10A Plug) |
| Refrigerant Type | Eco-Friendly R290 |
| Insulation Thickness | 60 mm HFC & CFC Free Foam Insulation |
| Ambient Operating Rating | Approved for +43°C Ambient (60% Relative Humidity) |
| Net Weight | 104.0 kg |
| Warranty | 2 Years Parts & Labour (+ 2 Years Parts Only upon registration within 14 days of invoice) |
Delivery & Operational Notes
-
Residential Delivery: Freight to residential or non-commercial addresses requires a customised delivery quote. Please contact our sales team prior to ordering.
-
Extended Warranty: Standard warranty covers 2 Years Parts and Labour. Receive an additional 2 Years Parts-Only protection by registering your product online within 14 days of invoice.
N.B Images are for illustrative purposes only. Specifications are subject to change without notice.