Thermaster
Thermaster SCB/15 2-Door Salad & Sandwich Prep Fridge (7 x 1/3 GN) | 550L 10A
[GLOBAL_MSG]
Accelerate assembly times and keep fresh ingredients crisp on the line with the FED-X XSS7C13S2V 282 Litre Double Door Stainless Steel Sandwich & Salad Prep Workbench Refrigerator. Purpose-built for high-volume sandwich bars, salad stations, pizzerias, kebab shops, and busy commercial cafes, this 1360 mm wide prep counter pairs a refrigerated top cutout accommodating 7 × 1/3 Gastronorm (GN) pans (up to 150 mm deep) with a spacious GN 1/1 compatible two-door chilled storage cabinet underneath.
Constructed with a full stainless steel interior and exterior featuring hygienic coved internal corners and thick 60 mm HFC- and CFC-free insulation, the XSS7C13S2V is engineered with leading European refrigeration components—including a Cubigel compressor, Dixell electronic controller, and ebm-papst evaporator and condenser fans. Tropicalised for demanding Australian commercial kitchens, it reliably holds safe food temperatures between +2°C and +8°C even in ambient heat up to +43°C.
Refrigerated Top Well Fits 7 × 1/3 GN Pans (Up to 150 mm Deep): Integrated top prep cut out holds seven 1/3 Gastronorm pans for rapid line access to sliced meats, cheeses, salads, and toppings, preserving pre-chilled ingredient temperatures for up to 4 hours during peak service rushes.
Spacious GN 1/1 Compatible Lower Cabinet (282 L Gross / 259 L Net): Generous underbench storage cavity fits standard GN 1/1 pans and trays, allowing staff to restock empty top pans directly from chilled storage in seconds.
Tropicalised +43°C Ambient Rating: Heavy-duty fan-forced refrigeration system is tested and approved for Australian kitchens operating up to +43°C ambient (at 60% relative humidity) to ensure fast temperature recovery.
Premium European Refrigeration Components: Driven by an energy-efficient Cubigel compressor using natural R290 refrigerant, ebm-papst fan motors, and a precise Dixell digital temperature controller.
Hygienic All-Stainless Steel Construction with Coved Corners: Commercial stainless steel interior and exterior with rounded internal coved corners eliminate dirt traps for effortless end-of-shift sanitising.
Self-Closing Doors & Heavy-Duty 40 kg Wire Shelves: Fitted with magnetic self-closing doors to prevent cold-air loss and 2 adjustable wire shelves (1 per door), each rated up to 40 kg load capacity.
Optional Drawer Conversions Available: Can be customised with optional 2-drawer or 3-drawer bank modules in place of solid doors to suit specialised prep workflows.
2 Years Parts & Labour + 2 Years Parts-Only Warranty: Covered by a 2-year parts and labour warranty, extendable with an additional 2 years parts-only protection when registered online within 14 days of invoice.
| Specification | Details |
| Brand | FED-X |
| Model / SKU | XSS7C13S2V |
| Product Type | Commercial Two-Door Stainless Steel Sandwich / Salad Prep Fridge |
| Gross / Net Volume | 282 Litres Gross | 259 Litres Net |
| Top Gastronorm Well Capacity | Holds 7 × 1/3 GN Pans (up to 150 mm deep; up to 4 hours pre-chilled hold time) |
| Lower Cabinet Compatibility | Fits standard GN 1/1 Pans & Trays |
| Temperature Set Range | +2°C to +8°C |
| Ambient Operating Rating | Tropicalised – Approved for +43°C Ambient (60% Relative Humidity) |
| Cooling System | Fan-forced cooling |
| Compressor / Controller / Fans | Cubigel Compressor | Dixell Digital Controller | ebm-papst Evaporator & Condenser Fans |
| Refrigerant & Insulation | Eco-friendly R290 | 60 mm HFC & CFC-free foam insulation |
| Construction & Doors | Full Stainless Steel interior & exterior with coved internal corners; 2 × magnetic self-closing doors (optional 2- or 3-drawer modules available) |
| Included Shelving | 2 × Heavy-Duty Wire Shelves (1 per door, max 40 kg load per shelf) |
| External Dimensions (W × D × H) | 1360 mm W × 700 mm D × 1406 mm H |
| Internal Dimensions (W × D × H) | 799 mm W × 580 mm D × 564 mm H |
| Power Supply & Output | 240V / 50Hz / 320W (Standard 10 Amp plug) |
| Net Weight | 104.0 kg |
| Warranty | 2 Years Parts & Labour + 2 Years Parts Only (upon online registration within 14 days of invoice) |
Remove Pans & Cover Top Well Overnight: At the end of service, remove all 1/3 GN pans from the top cutout, cover and transfer perishable ingredients into the lower chilled cabinet or a main cool room overnight, and wash the pans thoroughly in warm soapy water or a commercial dishwasher.
Sanitise Stainless Steel, Coved Corners & Door Gaskets Daily: Switch off the unit before cleaning. Wipe down the top prep well, cutting board/work surface, coved internal corners, stainless steel exterior, and magnetic door seals daily with a soft microfibre cloth and food-safe sanitiser—wiping in the direction of the grain.
Clean Wire Shelves & Drain: Periodically remove the 2 heavy-duty wire shelves to wash away spills, and keep the internal condensate drain clear of food crumbs.
Clean Condenser Coils & Vents Monthly: Brush or vacuum dust, flour, and grease build-up from the condenser air intake grille and coils every month so the Cubigel compressor and ebm-papst fans maintain peak efficiency in +43°C ambient kitchens.
Standard commercial road freight delivery is available Australia-wide to commercial business addresses with level ground access or loading docks. Due to the 1360 mm width, 700 mm depth, 1406 mm height,104.0 kg net weight, and heavy-duty upright commercial crating of this two-door sandwich prep fridge, delivery via a hydraulic tail-lift truck or to a commercial loading dock with forklift or pallet handling equipment is standard.(Please keep the unit upright during transit and allow it to stand before powering on.) For deliveries to residential, home-based business, or non-commercial addresses, please contact our friendly commercial sales team prior to placing your order to obtain a customised courier quote and confirm delivery logistics.
How many Gastronorm pans fit in the FED-X XSS7C13S2V Sandwich Counter? The refrigerated top prep cut out holds 7 × 1/3 GN pans up to 150 mm deep, while the spacious lower two-door cabinet (282L gross / 259L net) is GN 1/1 compatible and includes two adjustable wire shelves rated at 40 kg each.
Is the FED-X XSS7C13S2V built for hot Australian commercial kitchens? Yes. Tropicalised for tough Australian conditions, it uses a European Cubigel compressor, ebm-papst fans, Dixell digital controller, and 60 mm insulation to reliably hold +2°C to +8°C in ambient temperatures up to +43°C (at 60% relative humidity).
How do I claim the 4-year extended warranty on the FED-X XSS7C13S2V? The unit comes with a standard 2-year parts and labour warranty. Simply register your product online within 14 days of your invoice date to activate an additional 2 years of parts-only warranty coverage.
N.B Images are for illustrative purposes only. Specifications are subject to change without notice.
Customer Reviews