Fagor Kore 700 Series C-G761H 6 Burner Gas Range with GN 2/1 Oven | 208.9 MJ/h

[GLOBAL_MSG_2]

Drive high-volume cookline speed, support massive stockpots alongside delicate 8 cm saucepans, and streamline bulk roasting beneath a single heavy-duty footprint with the Fagor Kore 700 Series C-G761H Commercial 6-Burner Gas Range with Static Gas Oven. Precision-designed and manufactured in Spain by European hospitality leader Fagor Professional, this 1200 mm wide x 730 mm deep commercial gas cooktop and oven is purpose-engineered for high-turnover Australian restaurants, busy pub bistros, hotel kitchens, catering operations, and institutional dining facilities. Delivering a formidable 208.9 MJ/h (56.6 kW) total gas output, the C-G761H pairs six 8.0 kW nickel-plated cast iron double-crown burners with a spacious 8.6 kW GN 2/1 static gas oven.

Six High-Output 8.0kW Double-Crown Burners & RAAF Enamelled Grates

Uneven flame distribution creates hot spots that scorch sauces and slow down boiling times during peak docket rushes. The Fagor C-G761H is equipped with six Ø 120 mm double-crown burners and diffusers fabricated from durable nickel-plated cast iron, delivering 8.0 kW per burner with broad, uniform heat transfer across the entire base of large stockpots and sauté pans. Each burner features a protected low-consumption pilot light and flame-failure thermocouple housed inside the burner body to shield components from boil-overs.

Supporting the cookware are three heavy-duty 397 x 580 mm double grates (397 x 290 mm per burner) finished in RAAF acid- and alkaline-resistant enamelled cast iron. Engineered with a reduced 75 mm spacing between central bars, the grates accommodate small pans down to 8 cm in diameter without tipping, while sitting flush with the high-temperature enamelled cast iron rear flue protector so chefs can slide heavy pots smoothly across the entire 1200 mm cooktop.

Spacious GN 2/1 Static Gas Oven with Cast Iron Floor (125°C to 310°C)

Positioned beneath the cooktop is a high-capacity 8.60 kW static gas oven engineered to fit full-size GN 2/1 Gastronorm pans (650 x 530 mm) inserted sideways for superior cookline ergonomics. Fired by a tubular stainless steel burner with piezoelectric ignition, pilot light, and safety thermocouple, the oven is controlled via an ergonomic upper-panel thermostatic valve spanning 125°C to 310°C. Inside, an all-stainless-steel cooking chamber is paired with a heavy-duty cast iron oven floor for uniform radiant heat distribution, three-level anti-tipping tray rails, a high-temperature fibreglass perimeter door seal, and a deep-drawn detachable oven door for effortless servicing.

1.5mm AISI-304 Stainless Steel Top & Technician-Friendly Engineering

Built to withstand decades of heavy commercial use, the Kore 700 Series features a deep-drawn 1.5 mm thick AISI-304 food-grade stainless steel top with laser-cut joints, automatic robotic welding, and hidden fasteners—eliminating grime traps and satisfying Food Standards Australia New Zealand (FSANZ) Standard 3.2.2 Food Safety Practices. Front-mounted control knobs feature protective support bases with anti-water-infiltration seals, while flexible internal stainless steel gas pipes and full front component access simplify servicing. Mounted on height-adjustable stainless steel feet and weighing 138 kg, the range is backed by a 2 Years Commercial Parts and Labour Warranty, plus an additional 2 Years Parts-Only Warranty when registered online within 14 days of invoice issuance.(Optional accessories such as a drop-on cast iron frying plate and water column are available separately).

Key Features & Benefits

• Six 8.0kW Double-Crown Burners (Ø 120mm): Nickel-plated cast iron burners distribute intense, even heat across large and small pans while preventing hot spots.

• RAAF Enamelled Cast Iron Double Grates: Resistant to fire, acids, alkalis, and thermal shock, with 75 mm central bar spacing to support pans as small as 8 cm.

• Flush Enamelled Flue Protector: Sits level with the burner grates to expand usable cooking surface and allow effortless pot sliding.

• Heavy-Duty 1.5mm AISI-304 Stainless Steel Top: Deep-drawn European stainless steel with laser-cut welded joints and hidden screws for maximum hygiene.

• Protected Internal Pilot & Thermocouple: Shielded within the burner body against spillages and impacts for reliable ignition shift after shift.

• Spacious GN 2/1 Static Gas Oven (8.60kW): Accommodates sideways-loaded GN 2/1 pans with piezoelectric ignition and thermostatic control from 125°C to 310°C.

• Cast Iron Oven Floor & Anti-Tipping Rails: Ensures uniform bottom heat distribution with 3-height anti-tip tray runners and a fibreglass thermal door seal.

• Water-Protected Front Controls & Front Service Access: Anti-infiltration control bases and flexible internal stainless steel gas piping simplify cleaning and maintenance.

• Spanish Design & Manufacturing: Precision-engineered in Spain by Fagor Professional to integrate seamlessly into Kore 700 cooklines.

• Extended 2+2 Year Commercial Warranty: Supported by 2 Years Parts & Labour + 2 Years Parts Only upon registration within 14 days of invoice.

Technical Specifications

Daily Care, Cleaning & Maintenance Guidelines

To protect the nickel-plated burners, preserve the RAAF enamelled grates, and maintain strict commercial kitchen hygiene:

1. Cool-Down & Gas Isolation: Always turn all seven control knobs to the off position, shut off the main commercial gas isolation valve, and allow the cast iron grates, burners, and oven chamber to cool completely before cleaning.

2. RAAF Enamelled Cast Iron Grate Care: Lift off the three 397 x 580 mm double grates and wash them in warm water with a commercial degreaser and stiff nylon brush. The RAAF enamel coating resists alkaline and acidic cleaners, though steel wool or metal scrapers should be avoided to preserve the smooth glaze. Dry thoroughly before replacing.

3. Nickel-Plated Double-Crown Burner Maintenance: Lift out the easy-position burner heads and diffusers weekly. Soak in warm soapy water to clear any carbonised grease from the flame ports, rinse, and dry completely before re-seating—ensuring the protected internal pilot light and thermocouple remain unobstructed.

4. 1.5mm AISI-304 Stainless Steel Top: Wash the deep-drawn stainless steel drip tray and surface top daily using warm water, a mild neutral detergent, and a soft microfibre cloth, wiping in the direction of the metal grain.

5. GN 2/1 Oven Chamber & Cast Iron Floor: Slide out the 3-level anti-tipping rails for washing in the scullery. Brush crumbs and roasted debris from the cast iron oven floor and wipe down the stainless steel interior walls and fibreglass door gasket with a damp cloth.

6. Washdown Safety Precautions: While the control bases feature water-infiltration protection, never aim high-pressure industrial washdown hoses or pre-rinse guns directly at burner ports, pilot assemblies, or control knob shafts.

Commercial Kitchen Installation & Gas Compliance Guidelines

The Fagor Kore 700 Series C-G761H is a high-output commercial gas appliance requiring professional installation in accordance with Australian regulatory standards:

1. Licensed Commercial Gasfitter Installation (AS/NZS 5601.1): Operating at 208.9 MJ/h (56.6 kW) total gas consumption, installation, gas regulator sizing, pressure testing, and commissioning must be completed by a licensed commercial gasfitter in strict compliance with AS/NZS 5601.1 Gas Installations and local Australian gas authority regulations. Specify Natural Gas (NG) or LPG at the time of ordering.

2. Commercial Exhaust Canopy Compliance (AS 1668.2): Due to the high 208.9 MJ/h thermal output across six open burners and the gas oven, this range must be installed beneath an approved commercial mechanical exhaust canopy interlocked with the gas supply in accordance with AS 1668.2 and AS/NZS 5601.1.

3. Combustible Wall Clearances: Maintain mandatory side and rear clearances from combustible surfaces or install approved non-combustible stainless steel wall cladding in accordance with AS/NZS 5601.1 and local fire codes.

4. Level Floor Positioning: Position the 138 kg range on a flat, level, non-combustible commercial tiled or concrete floor, adjusting the stainless steel feet so the 850 mm worktop sits completely level and aligns flush with adjacent Kore 700 series cookline equipment.

Freight & Delivery Notice

Standard commercial road freight delivery is available Australia-wide to commercial business addresses with level ground access or loading docks. Due to the 1200 mm width, 138 kg net weight, and heavy commercial crating of this 6-burner gas range, delivery via a hydraulic tail-lift truck or to a commercial loading dock with pallet handling equipment is standard. For deliveries to residential, home-based business, or non-commercial addresses, please contact our friendly commercial sales team prior to placing your order to obtain a customised courier quote and confirm delivery logistics.

Frequently Asked Questions

What grade of stainless steel is used on the Fagor Kore C-G761H worktop?

The deep-drawn surface top is fabricated from heavy-duty 1.5 mm thick AISI-304 food-grade stainless steel with laser-cut welded joints and hidden screws, providing superior corrosion resistance, structural strength, and hygiene compared to lighter 430-grade steel.

Can small saucepans sit safely on the burner grates without tipping?

Yes. The RAAF enamelled cast iron double grates are engineered with a reduced 75 mm spacing between the central bars, allowing small pans and milk warmers as narrow as 8 cm in diameter to sit securely without tipping over.

What size Gastronorm pans fit inside the static gas oven?

The 8.60 kW static gas oven accommodates full-size GN 2/1 Gastronorm pans (650 x 530 mm) loaded sideways, as well as two GN 1/1 pans side-by-side across three adjustable anti-tipping rail levels.

Is this gas range available in both Natural Gas and LPG?

Yes. The Fagor Kore 700 Series C-G761H is available configured for either Natural Gas (NG) or Propane/LPG. Please specify your site's gas supply at the time of ordering so the factory-configured appliance is dispatched.

How does the flush enamelled flue protector improve cookline efficiency?

Unlike raised rear flues that block oversized stockpots, the high-temperature enamelled cast iron flue protector sits completely flush with the burner grates. This allows chefs to slide heavy pots smoothly across the cooktop and increases the usable surface area for large cookware.

How does the 4-year warranty work?

The Fagor Kore C-G761H includes a standard 2 Years Commercial Parts and Labour Warranty. Registering the product online within 14 days of the invoice date unlocks an additional 2 Years Parts-Only Warranty, providing 4 full years of manufacturer warranty coverage.

N.B Image is for illustrative purposes only. Specifications are subject to change without notice.