Blizzard Ice Maker - SN-31A

**Use the discount code: SAVE10 to apply an additional 10% discount at checkout for this product**

Output/24h: Up to 31kg

Bin Capacity: Approx. 10kg

Underbench Ice Maker

Key Features:

• Air-cooled
• U.S. Morris Water Pump
• German EBM-Pabst fans
• Hisakage PCL
• 22 mm2 ice-cubes
• Denmark Danfross Expansion valve & Dry Filter
• Japanese Saginomiya Solenoid & Hydraulic Valve
• Includes removable water filter
• Watermark certified product sticker 

• Please note you will need to contact our friendly sales team for a quote to deliver to a residential address  

• Dimensions: 460mm W x 430 D x 800 H
• Power: 220V; 300W/ 10A outlet required
• Net weight: 39Kg
• Warranty: 2 Years Parts and Labour

N.B All Ice machines MUST be maintained to ensure high performance.
The cartridge on the water filter system needs to be replaced every 6 months and the unit must be de-scaled to clean the refrigeration evaporator plate.
This maintains the quality of the ice shape and thickness.

 Remove scale and mineral deposits from evaporator plate and water distribution system using approved descaler.

 Sanitise water reservoir, distribution tubes, and bin interior.

 Clean and flush condenser coils (air-cooled units).

 Inspect condenser fan motor and blades.

 Check inlet water valve, float, and filters for correct operation.

 Verify ice thickness probe or sensor calibration.

 Inspect refrigerant pressures, superheat, and subcooling - adjust if necessary.

 Test compressor amperage and general performance.

 Inspect water pump operation and clean pump housing.

 Check harvest cycle operation (heater or hot gas valve).

 Inspect electrical connections, relays, and contactors.

 Replace inline water filter cartridge.

This program will extend machine life, improve ice quality, reduce bacterial growth risks, and ensure food safety compliance.

If your machine is not maintained, your warranty may be void.

N.B Images are for illustrative purposes only. Specifications are subject to change without notice.