Provide constant boiling water on tap, power through high-volume tea and coffee service, and slash energy overheads with the Birko 1110086 TempoTronic 25L Commercial Stainless Steel Water Boiler. Australian designed and manufactured specifically for high-turnover cafes, school canteens, hospital staff rooms, corporate office kitchens, aged care facilities, and catering halls, this heavy-duty on-wall boiling water unit delivers rapid thermal recovery, twin-tank energy savings, and durable construction for demanding daily service.
Unlike conventional single-tank boilers that cool down drastically when fresh water enters the reservoir, the Birko TempoTronic utilizes patented stainless steel twin-tank technology. As water boils in the main chamber, the rising steam is captured to pre-heat incoming cold water in a secondary header tank before it reaches the heating element. This thermodynamic recovery process dramatically accelerates boiling recovery rates, reduces temperature fluctuations, and cuts everyday commercial electricity consumption.
Driven by a high-output 2.4kW commercial heating element operating on standard single-phase 240V power, the 1110086 holds a massive 25 litres of boiling water (150 standard cups ready to serve) and replenishes continuously at a rate of up to 150 cups per hour. This continuous, reliable output ensures tea, coffee, and hot food preparation run smoothly without service delays during peak morning and lunchtime rush periods.
Engineered for long-term reliability in harsh Australian water conditions, the internal storage tank is fabricated from heavy-duty 444-grade stainless steel, offering superior resistance to pitting, corrosion, and scale accumulation compared to basic copper or lower-grade steel tanks. The exterior features a durable, mirror-polished commercial stainless steel case that wipes clean in seconds and resists kitchen grease, steam, and scuffs.
The TempoTronic 25L incorporates a dual-action safety system with a built-in over-temperature thermal cut-out that automatically isolates electrical power if the unit boils dry or experiences an interrupted water feed. Drawing 2400W (10 Amps), it connects straight into a standard Australian single-phase 10A commercial wall socket without requiring expensive three-phase electrical modifications. An optional external electronic timer is also available to power down the unit automatically outside of trading hours for added energy efficiency.
Generous 25-Litre Capacity (150 Cups): Delivers 150 cups of ready-to-pour boiling water on demand, plus an ongoing recovery rate of up to 150 cups per hour.
Patented Twin-Tank Technology: Captures steam from boiling water to preheat incoming water, slashing power consumption and speeding up thermal recovery.
Corrosion-Resistant 444-Grade Stainless Tank: High-grade internal tank provides exceptional defense against scale accumulation and mineral pitting.
Polished Stainless Steel Outer Casing: Commercial-grade, mirror-finish exterior blends into modern cafes, tearooms, and commercial cooklines.
High-Output 2.4kW Element: Delivers rapid start-up and continuous boil times while running on standard commercial electrical circuits.
Integrated Over-Temperature Safety Cut-Out: Automatic dry-boil safety sensor isolates power to prevent element burnout if water supply is cut.
Wall-Mounted Space-Saving Profile: Frees up valuable benchtop real estate by mounting securely to commercial kitchen or tearoom walls.
Low-Maintenance Commercial Architecture: Designed for easy internal access during routine descaling and component servicing.
Australian Designed & Manufactured: Engineered to withstand harsh municipal and regional Australian water conditions.
Standard Australian 10A Connection: 2.4kW power draw operates on standard 240V single-phase commercial power outlets.
Comprehensive 12-Month Warranty: Full commercial manufacturer backing for complete peace of mind.
| Feature | Specification Details |
| Model Code | 1110086 |
| Range Name | Birko TempoTronic Series |
| Product Type | Commercial Wall-Mounted Automatic Boiling Water Unit |
| Total Water Capacity | 25.0 Litres |
| Initial Cup Output | 150 Cups (Immediate Ready Reserve) |
| Hourly Recovery Output | Up to 150 Cups / Hour |
| Heating Power | 2.4 kW (2400 Watts / 10 Amps) |
| Electrical Supply | 220–240V / 50Hz / Single Phase (Standard AU 10A Plug) |
| Tank Construction | Corrosion-Resistant 444-Grade Stainless Steel |
| Outer Case Finish | Mirror-Polished Heavy-Duty Stainless Steel |
| Technology | Twin-Tank Steam Pre-Heat Recovery System |
| Safety Features | Automatic Over-Temperature Thermal Safety Cut-Out |
| External Dimensions | 786(H) x 401(W) x 301(D) mm |
| Plumbing Supply Inlet | 1/2" BSP Cold Water Mains Connection |
| Drain / Vent Outlet | Integrated Overflow & Vent Drainage Pipe |
| Optional Accessories | External 7-Day Electronic Power Timer (Sold Separately) |
| Warranty | 12 Months Commercial Parts & Labour Warranty |
To protect heating element efficiency, maintain rapid recovery, and prevent scale build-up:
Daily Exterior Wipe-Down: Wipe the polished stainless steel outer case, tap handle, and fascia using a soft microfibre cloth dampened with warm water and a neutral, food-safe detergent. Never use steel wool, abrasive scouring pads, wire brushes, or chlorine-based bleaches, as these will scratch the polished surface and cause pitting.
Tap & Spout Cleaning: Clean the dispensing tap spout regularly to remove tea, coffee, and mineral residue. Ensure the silicone seat and swivel handle move freely.
Inspect Vent & Drain Clearances: Ensure the lower tundish and drain line remain clear of mineral scale, lint, or debris so expansion water and steam can discharge freely during heating cycles.
Routine Descaling Procedure: In hard water areas, mineral calcium and scale will accumulate on the heating element and inside the 444 stainless steel tank:
Isolate the unit at the electrical wall switch and turn off the cold water isolation tap.
Drain the hot water completely via the service drain tap into a heat-resistant drainage bucket.
Introduce an approved commercial food-safe citric acid descaler or descaling solution through the service access port in accordance with manufacturer instructions.
Allow the solution to dissolve scale for 30 to 45 minutes, then drain thoroughly.
Flush the tank with fresh potable water twice before turning on the power and returning the unit to normal service.
Electrical & Water Safety: Never spray the outer case with a commercial high-pressure washdown hose or sink pre-rinse gun. All descaling must be performed with the electrical supply completely isolated.
The Birko 1110086 is designed for permanent wall-mounted back-of-house and tearoom installation:
Standard 10A Electrical Connection: The boiler is rated at 2.4kW (2400W) and operates on single-phase 220–240V power. It is supplied with a standard Australian 10 Amp plug and lead, plugging straight into a dedicated 10A wall outlet positioned near the mounting bracket. Avoid running the unit on double adaptors or domestic extension leads.
Structural Wall Mounting: Operating with a full 25-litre water reservoir plus internal components, the unit has an operational weight exceeding 35 kg. It must be mounted to a structurally sound wall (stud wall reinforced with noggings, solid brick, or concrete masonry) using heavy-duty masonry anchors or coach screws through the rear mounting chassis.
Mains Plumbing & Pressure Limiting: Connect the unit to a cold potable water supply via a standard 1/2" BSP isolating ball valve. In installations where mains water pressure exceeds 500 kPa, an approved pressure-limiting valve (PLV) must be fitted on the inlet line in compliance with AS/NZS 3500.1 plumbing codes.
Tundish & Drainage Venting: The boiler vent and overflow line must discharge to an open, visible tundish or waste drain via gravity fall in accordance with local plumbing regulations, ensuring hot expansion water and steam vent safely without backing up.
Clearance & Ventilation: Maintain at least 150 mm of vertical clearance above the unit for top lid access and maintenance servicing, and ensure the steam vent discharges away from electrical sockets and overhead laminated cabinetry.
Free standard commercial road freight, kerbside delivery is available Australia-wide.
Can I plug this 25L on-wall boiler into a standard Australian 10 Amp power point?
Yes. The Birko 1110086 draws 2.4kW (2400W / 10 Amps) on standard single-phase 240V power. It comes fitted with a standard Australian 10 Amp plug, allowing it to connect straight into standard commercial wall sockets without requiring specialised 15A wiring.
How does the twin-tank technology save energy?
In traditional single-tank urns, cold water dumps straight into the boiling reservoir, dropping the water temperature and forcing the element to run on full power. The Birko twin-tank system captures the steam generated by boiling water to preheat cold incoming mains water in a secondary chamber. By the time this water enters the boiling chamber, it is already warm, cutting recovery times and reducing electricity consumption.
Why is 444-grade stainless steel used for the internal tank?
Grade 444 stainless steel is a specialised ferritic alloy engineered for high-temperature water heating vessels. It provides superior resistance to stress corrosion cracking, chloride attack, and mineral pitting compared to standard 304 stainless steel or copper, making it reliable across diverse Australian municipal and regional water supplies.
Is this unit permanently connected to the water mains?
Yes. The TempoTronic is an automatic wall-mounted boiler that plumbs directly into your cold water supply via a 1/2" BSP connection. It fills and replenishes automatically as water is drawn from the tap, eliminating manual refilling.
What does the safety over-temperature cut-out do?
If the mains water supply is interrupted or if the tank ever boils dry, an internal thermal safety cut-out sensor detects the rapid heat spike and cuts electrical power to the 2.4kW heating element, protecting the tank, element, and plumbing from overheating and fire hazards.
N.B Images are for illustrative purposes only. Specifications are subject to change without notice.
Provide constant boiling water on tap, power through high-volume tea and coffee service, and slash energy overheads with the Birko 1110086 TempoTronic 25L Commercial Stainless Steel Water Boiler. Australian designed and manufactured specifically for high-turnover cafes, school canteens, hospital staff rooms, corporate office kitchens, aged care facilities, and catering halls, this heavy-duty on-wall boiling water unit delivers rapid thermal recovery, twin-tank energy savings, and durable construction for demanding daily service.
Unlike conventional single-tank boilers that cool down drastically when fresh water enters the reservoir, the Birko TempoTronic utilizes patented stainless steel twin-tank technology. As water boils in the main chamber, the rising steam is captured to pre-heat incoming cold water in a secondary header tank before it reaches the heating element. This thermodynamic recovery process dramatically accelerates boiling recovery rates, reduces temperature fluctuations, and cuts everyday commercial electricity consumption.
Driven by a high-output 2.4kW commercial heating element operating on standard single-phase 240V power, the 1110086 holds a massive 25 litres of boiling water (150 standard cups ready to serve) and replenishes continuously at a rate of up to 150 cups per hour. This continuous, reliable output ensures tea, coffee, and hot food preparation run smoothly without service delays during peak morning and lunchtime rush periods.
Engineered for long-term reliability in harsh Australian water conditions, the internal storage tank is fabricated from heavy-duty 444-grade stainless steel, offering superior resistance to pitting, corrosion, and scale accumulation compared to basic copper or lower-grade steel tanks. The exterior features a durable, mirror-polished commercial stainless steel case that wipes clean in seconds and resists kitchen grease, steam, and scuffs.
The TempoTronic 25L incorporates a dual-action safety system with a built-in over-temperature thermal cut-out that automatically isolates electrical power if the unit boils dry or experiences an interrupted water feed. Drawing 2400W (10 Amps), it connects straight into a standard Australian single-phase 10A commercial wall socket without requiring expensive three-phase electrical modifications. An optional external electronic timer is also available to power down the unit automatically outside of trading hours for added energy efficiency.
Generous 25-Litre Capacity (150 Cups): Delivers 150 cups of ready-to-pour boiling water on demand, plus an ongoing recovery rate of up to 150 cups per hour.
Patented Twin-Tank Technology: Captures steam from boiling water to preheat incoming water, slashing power consumption and speeding up thermal recovery.
Corrosion-Resistant 444-Grade Stainless Tank: High-grade internal tank provides exceptional defense against scale accumulation and mineral pitting.
Polished Stainless Steel Outer Casing: Commercial-grade, mirror-finish exterior blends into modern cafes, tearooms, and commercial cooklines.
High-Output 2.4kW Element: Delivers rapid start-up and continuous boil times while running on standard commercial electrical circuits.
Integrated Over-Temperature Safety Cut-Out: Automatic dry-boil safety sensor isolates power to prevent element burnout if water supply is cut.
Wall-Mounted Space-Saving Profile: Frees up valuable benchtop real estate by mounting securely to commercial kitchen or tearoom walls.
Low-Maintenance Commercial Architecture: Designed for easy internal access during routine descaling and component servicing.
Australian Designed & Manufactured: Engineered to withstand harsh municipal and regional Australian water conditions.
Standard Australian 10A Connection: 2.4kW power draw operates on standard 240V single-phase commercial power outlets.
Comprehensive 12-Month Warranty: Full commercial manufacturer backing for complete peace of mind.
| Feature | Specification Details |
| Model Code | 1110086 |
| Range Name | Birko TempoTronic Series |
| Product Type | Commercial Wall-Mounted Automatic Boiling Water Unit |
| Total Water Capacity | 25.0 Litres |
| Initial Cup Output | 150 Cups (Immediate Ready Reserve) |
| Hourly Recovery Output | Up to 150 Cups / Hour |
| Heating Power | 2.4 kW (2400 Watts / 10 Amps) |
| Electrical Supply | 220–240V / 50Hz / Single Phase (Standard AU 10A Plug) |
| Tank Construction | Corrosion-Resistant 444-Grade Stainless Steel |
| Outer Case Finish | Mirror-Polished Heavy-Duty Stainless Steel |
| Technology | Twin-Tank Steam Pre-Heat Recovery System |
| Safety Features | Automatic Over-Temperature Thermal Safety Cut-Out |
| External Dimensions | 786(H) x 401(W) x 301(D) mm |
| Plumbing Supply Inlet | 1/2" BSP Cold Water Mains Connection |
| Drain / Vent Outlet | Integrated Overflow & Vent Drainage Pipe |
| Optional Accessories | External 7-Day Electronic Power Timer (Sold Separately) |
| Warranty | 12 Months Commercial Parts & Labour Warranty |
To protect heating element efficiency, maintain rapid recovery, and prevent scale build-up:
Daily Exterior Wipe-Down: Wipe the polished stainless steel outer case, tap handle, and fascia using a soft microfibre cloth dampened with warm water and a neutral, food-safe detergent. Never use steel wool, abrasive scouring pads, wire brushes, or chlorine-based bleaches, as these will scratch the polished surface and cause pitting.
Tap & Spout Cleaning: Clean the dispensing tap spout regularly to remove tea, coffee, and mineral residue. Ensure the silicone seat and swivel handle move freely.
Inspect Vent & Drain Clearances: Ensure the lower tundish and drain line remain clear of mineral scale, lint, or debris so expansion water and steam can discharge freely during heating cycles.
Routine Descaling Procedure: In hard water areas, mineral calcium and scale will accumulate on the heating element and inside the 444 stainless steel tank:
Isolate the unit at the electrical wall switch and turn off the cold water isolation tap.
Drain the hot water completely via the service drain tap into a heat-resistant drainage bucket.
Introduce an approved commercial food-safe citric acid descaler or descaling solution through the service access port in accordance with manufacturer instructions.
Allow the solution to dissolve scale for 30 to 45 minutes, then drain thoroughly.
Flush the tank with fresh potable water twice before turning on the power and returning the unit to normal service.
Electrical & Water Safety: Never spray the outer case with a commercial high-pressure washdown hose or sink pre-rinse gun. All descaling must be performed with the electrical supply completely isolated.
The Birko 1110086 is designed for permanent wall-mounted back-of-house and tearoom installation:
Standard 10A Electrical Connection: The boiler is rated at 2.4kW (2400W) and operates on single-phase 220–240V power. It is supplied with a standard Australian 10 Amp plug and lead, plugging straight into a dedicated 10A wall outlet positioned near the mounting bracket. Avoid running the unit on double adaptors or domestic extension leads.
Structural Wall Mounting: Operating with a full 25-litre water reservoir plus internal components, the unit has an operational weight exceeding 35 kg. It must be mounted to a structurally sound wall (stud wall reinforced with noggings, solid brick, or concrete masonry) using heavy-duty masonry anchors or coach screws through the rear mounting chassis.
Mains Plumbing & Pressure Limiting: Connect the unit to a cold potable water supply via a standard 1/2" BSP isolating ball valve. In installations where mains water pressure exceeds 500 kPa, an approved pressure-limiting valve (PLV) must be fitted on the inlet line in compliance with AS/NZS 3500.1 plumbing codes.
Tundish & Drainage Venting: The boiler vent and overflow line must discharge to an open, visible tundish or waste drain via gravity fall in accordance with local plumbing regulations, ensuring hot expansion water and steam vent safely without backing up.
Clearance & Ventilation: Maintain at least 150 mm of vertical clearance above the unit for top lid access and maintenance servicing, and ensure the steam vent discharges away from electrical sockets and overhead laminated cabinetry.
Free standard commercial road freight, kerbside delivery is available Australia-wide.
Can I plug this 25L on-wall boiler into a standard Australian 10 Amp power point?
Yes. The Birko 1110086 draws 2.4kW (2400W / 10 Amps) on standard single-phase 240V power. It comes fitted with a standard Australian 10 Amp plug, allowing it to connect straight into standard commercial wall sockets without requiring specialised 15A wiring.
How does the twin-tank technology save energy?
In traditional single-tank urns, cold water dumps straight into the boiling reservoir, dropping the water temperature and forcing the element to run on full power. The Birko twin-tank system captures the steam generated by boiling water to preheat cold incoming mains water in a secondary chamber. By the time this water enters the boiling chamber, it is already warm, cutting recovery times and reducing electricity consumption.
Why is 444-grade stainless steel used for the internal tank?
Grade 444 stainless steel is a specialised ferritic alloy engineered for high-temperature water heating vessels. It provides superior resistance to stress corrosion cracking, chloride attack, and mineral pitting compared to standard 304 stainless steel or copper, making it reliable across diverse Australian municipal and regional water supplies.
Is this unit permanently connected to the water mains?
Yes. The TempoTronic is an automatic wall-mounted boiler that plumbs directly into your cold water supply via a 1/2" BSP connection. It fills and replenishes automatically as water is drawn from the tap, eliminating manual refilling.
What does the safety over-temperature cut-out do?
If the mains water supply is interrupted or if the tank ever boils dry, an internal thermal safety cut-out sensor detects the rapid heat spike and cuts electrical power to the 2.4kW heating element, protecting the tank, element, and plumbing from overheating and fire hazards.
N.B Images are for illustrative purposes only. Specifications are subject to change without notice.
Related Products
Birko
Birko
Birko 1110074 TempoTronic 3L Wall-Mounted Boiling Water Unit | 100 Cups/Hr Stainless Steel 10A
Birko
Birko
Birko 1018010 Commercial Hot Water Urn 10L | 40-50 Cups/Hr Stainless Steel 10A
Birko
Birko 1018030 Commercial Hot Water Urn 30L | 130-160 Cups/Hr Stainless Steel 10A
Request Callback Form
