Birko 1018030 Commercial Hot Water Urn 30L | 130-160 Cups/Hr Stainless Steel 10A

Deliver continuous piping-hot water, streamline tea and coffee service, and power through high-demand break periods with the Birko 1018030 30L Commercial Hot Water Urn. Engineered specifically for Australian corporate offices, catering operations, function venues, community halls, sporting clubs, school canteens, and construction site tearooms, this heavy-duty 30-litre boiler delivers rapid thermal recovery, robust double-wall thermal insulation, and exceptional durability in high-turnover hospitality environments.

High-Output 2200W Boiling Performance (130 to 160 Cups/Hour)

Powered by a 2200W high-performance heating element running on standard Australian single-phase 240V power, the Birko 1018030 yields between 130 and 160 standard cups of boiling water per hour. The variable thermostat gives operators precise temperature control, allowing you to tailor hot water holding temperatures for delicate herbal teas, instant coffees, or standard food prep applications. Dual external LED indicator lights provide immediate visual status for active "Heating" and service-ready "Ready" states.

Concealed Element with Rapid Recovery & Effortless Cleaning

Unlike basic catering boilers with exposed heating coils that attract scale, burn sediment, and complicate scrubbing, the Birko 30L urn features an advanced concealed element design. Positioned beneath a flat stainless steel heating plate, the element is protected from direct water scale accumulation, providing superior corrosion resistance and simplifying descaling routines. If service is ever required down the track, the element is fully replaceable, extending the operational life of the unit.

Double-Wall Insulated Stainless Steel & Twist-to-Lock Safety

Safety and thermal mass retention are paramount during busy buffet service. The urn is built with a polished double-walled stainless steel body paired with a heavy-duty composite thermoplastic base and heat-resistant safety handles. A vented stainless steel lid features a secure twist-to-lock mechanism that locks in steam and prevents accidental spills if the unit is knocked. Complete with boil-dry thermal protection that automatically isolates power if the reservoir runs empty, kitchen staff and patrons remain fully protected.

Clear Sight Glass & Non-Drip Chrome-Plated Brass Tap

Monitoring water levels is effortless thanks to the external, high-visibility water level sight glass, allowing staff to monitor capacity and refill before the tank runs dry. Dispensing is smooth and controlled via the commercial-grade,chrome-plated brass non-drip tap, preventing messy benchtop puddles, water burns, and wasted water. Drawing just under 10 Amps, the urn plugs directly into any standard Australian 10A power point.

Key Features & Benefits

• Generous 30-Litre Tank Capacity: Produces 130 to 160 cups per hour to cater for high-volume morning tea breaks, conferences, and sporting events.

• Double-Walled Polished Stainless Steel Body: Retains internal water heat, lowers energy consumption, and provides an easy-to-clean commercial finish.

• Concealed Heating Element: Resists mineral scale build-up, simplifies descaling, accelerates recovery, and is fully replaceable.

• Precision Variable Thermostat: Provides flexible temperature regulation to keep water at the perfect temperature for diverse beverages.

• Twist-to-Lock Vented Safety Lid: Seals steam inside and prevents accidental scalds or spills during busy trade.

• Boil-Dry Over-Temperature Protection: Internal safety cut-out sensor automatically cuts power if water runs dry.

• External Water Level Sight Glass: Gives instant visual confirmation of remaining water levels without removing the lid.

• Commercial Chrome-Plated Brass Tap: Heavy-duty, non-drip dispensing tap stops counter puddling and withstands constant daily use.

• Heat-Resistant Handles & Base: High-strength composite thermoplastic handles and base ensure safe, burn-free portability.

• Dual Heating & Ready Indicator Lights: Clear front-mounted LEDs show active heating and holding status at a glance.

• Standard Australian 10A Plug: 2200W power draw operates on standard 240V commercial electrical circuits.

• 12 Months Commercial Warranty: Backed by 12 months parts and labour coverage for complete peace of mind.

Technical Specifications

Daily Care, Maintenance & Descaling Guidelines

To prevent mineral scale build-up, protect heating element efficiency, and ensure clean hot beverage flavour:

1. Power Down & Cool Off: At the end of service, switch off the power switch, isolate the unit at the wall socket, and allow remaining water to cool to a safe handling temperature before draining or cleaning.

2. End-of-Day Emptying: Drain any unused water completely via the non-drip tap into a sink or drainage container. Leaving standing water in the urn overnight accelerates mineral and calcium precipitation.

3. Internal Chamber Washdown: Wipe out the interior stainless steel chamber with a soft, clean microfibre cloth dampened with warm water. Because the element is concealed beneath the floor plate, the interior wipes clean smoothly. Never use steel wool, wire brushes, abrasive powders, or caustic chlorine-based cleaners, as these pit stainless steel and void warranty coverage.

4. Sight Glass & Tap Maintenance: Periodically unscrew the sight glass top cap and flush the glass tube with warm water and a thin tube brush to clear mineral film. Wipe down the chrome-plated brass tap with a damp cloth to prevent tea and coffee staining.

5. Routine Descaling Procedure: In areas with hard municipal water, calcium scale will accumulate on the base heating plate. When mineral scale appears:

   • Fill the urn with water to approximately half capacity.

   • Add an approved commercial food-safe citric acid descaler or white vinegar solution (approx. 1 part vinegar to 4 parts water).

   • Turn the urn on and allow the solution to heat to a gentle simmer for 15 minutes.

   • Switch off, unplug, and allow the solution to stand for 30 minutes to dissolve mineral scale.

   • Drain the solution through the chrome tap, rinse the vessel thoroughly three times with fresh clean water, and boil a fresh batch of plain water to discharge through the tap before returning to beverage service.

6. Electrical Safety: Never immerse the base, power cord, or electrical switch in water, and never spray the exterior body with a high-pressure commercial pre-rinse hose.

Countertop Placement & Electrical Guidelines

The Birko 1018030 is designed for self-service drink stations and catering pass integration:

1. Standard 10A Electrical Connection: The urn draws 2200W (approx. 9.6 Amps) on standard single-phase 220–240V power and comes fitted with a standard Australian 10 Amp plug. It connects straight into standard commercial wall sockets. Avoid the use of domestic extension leads or double adaptors, as continuous 2200W heating can overheat undersized domestic leads.

2. Solid Countertop Positioning: Position the unit on a flat, level, sturdy, and heat-resistant commercial benchtop or catering table. Fully loaded with 30 litres of water, the urn weighs 32.9 kg; ensure the supporting counter is rated to bear this load safely.

3. Overhead & Clearance Space: Maintain a clear vertical space above the urn (at least 300 mm) to allow staff to lift the lid and refill the tank comfortably without scalding themselves on escaping steam. Position the urn so the steam vent on the lid faces away from walls, electrical sockets, and overhead cabinetry.

4. Safe Traffic Flow: Place the urn well back from counter edges to eliminate the risk of patrons or children bumping the chrome tap. For self-service buffets, position a shallow drip tray beneath the tap spout to catch stray cup drips.

Freight & Delivery Notice

Free standard commercial road freight kerbside delivery is available Australia-wide.

Frequently Asked Questions

Can I plug this commercial hot water urn into a standard 10 Amp power point?

Yes. The Birko 1018030 is rated at 2200W on standard 240V single-phase power, drawing approximately 9.6 Amps. It comes supplied with a standard Australian 10 Amp plug and requires no special electrical modifications.

How many cups of hot water does this urn deliver per hour?

The unit holds 30 litres of water at full capacity and delivers an output of 130 to 160 standard 200ml cups per hour, making it suitable for large conferences, school functions, and busy commercial dining rooms.

What is the benefit of a concealed heating element?

Unlike exposed heating elements that submerge metal coils in the water—which causes rapid scale accumulation, burnt mineral taste, and awkward cleaning—a concealed element sits beneath a sealed stainless steel plate. This makes cleaning and descaling quick and simple, extends element working life, and keeps water tasting fresh.

What happens if the urn runs out of water while turned on?

The urn incorporates an automatic boil-dry thermal protection device. If water boils away or the unit is accidentally activated dry, the internal sensor automatically cuts electrical power to the element, preventing burn-out, structural damage, and fire hazards.

How often should I descale the water urn?

Descaling frequency depends on your local water hardness and daily volume. In soft water areas, descaling once every 2 to 3 months is generally sufficient. In hard water areas (such as regional bore water or high-mineral municipal supplies), perform a citric acid descale monthly or whenever a visible white crust forms on the base plate.

N.B Image is for illustrative purposes only. Specifications are subject to change without notice.