Apuro CX879-A 20L Energy Saving Water Boiler | Double-Wall 10A

The Apuro 20L Commercial Energy-Saving Manual Fill Water Boiler (CX879-A) is a high-efficiency, thermally insulated benchtop beverage boiler engineered specifically for Australian cafes, mobile food vans, catering trailers, community centres, sporting clubs, church halls, and busy staff lunchrooms. Sized at 380 mm Wide x 587 mm High and weighing 5.99 kg, this robust 20-litre manual-fill hot water urn features an advanced double-walled stainless steel body that slashes running energy consumption by up to 60% compared to conventional single-skinned urns. Driven by a fast-heating 2.2kW concealed element running on standard Australian 230–240V mains power with a factory-fitted 10 Amp plug, the CX879-A heats water up to six minutes faster than non-insulated boilers while retaining heat with exceptional efficiency between 30°C and 100°C for high-demand tea, coffee, and instant hot drink service.

Why operators choose the Apuro CX879-A:

• Double-walled thermal insulation (up to 60% energy savings) — twin-skin stainless steel casing with dedicated thermal insulation traps heat inside the tank, drastically reducing standby heat loss, lowering electricity overheads, and keeping the outer housing cooler to the touch.

• Rapid heating & minimal temperature drop — reaches optimum serving temperatures roughly 6 minutes faster than single-wall alternatives and holds heat so effectively that water temperature drops only around 18°C over two full hours when turned off.

• Balanced 20-litre commercial capacity — provides a high-volume liquid reserve capable of handling rush periods without taking up excessive bench depth in compact servery lines, food trailers, or mobile catering vehicles.

• Concealed 2.2kW heating element — mounted securely beneath a flat internal stainless steel floor to prevent direct exposure to water, significantly reducing mineral limescale accumulation, extending heating life, and simplifying descaling.

• Precision rotary temperature dial — intuitive mechanical thermostat allows accurate temperature selection between 30°C/32°C and 100°C, backed by an automatic keep-warm mode to preserve optimal holding heat without continuous boiling.

• Durable non-drip dispensing tap — commercial lever tap with a 140mm dispense height clearance easily fits standard takeaway coffee cups, teacups, and ceramic mugs without awkward tilting.

• Boil-dry thermal safety cut-off — external safety cut-out switch with manual reset prevents element burnout and extends equipment lifespan if the tank runs dry.

• Sturdy non-slip rubber feet — delivers rigid countertop stability on smooth stainless steel benches, laminate servery tables, and mobile food truck shelving during service.

• Standard 10A plug-and-play installation — efficient 2200W draw runs on standard Australian single-phase 230–240V mains power with a factory-fitted 10 Amp wall plug, requiring no 15A electrical circuits or hardwiring.

Technical Specifications

Operating & Service Notice

This commercial hot water boiler is engineered exclusively for heating and dispensing clean, potable water; never add milk, tea leaves, ground coffee, sugar, cordial, or soup mixes directly into the tank. Always ensure the water level covers the internal floor plate before switching on the power to prevent tripping the thermal safety cut-out switch. In hard-water areas across Australia, mineral scale will naturally accumulate over time; regularly descale the stainless steel interior and base floor using a commercial food-grade urn descaler to maintain element heating speed and efficiency. Always disconnect the power plug and allow the water to cool fully before wiping down the exterior with a soft, non-abrasive damp cloth.

Freight & Delivery Notice

Standard commercial delivery is available across Australia. Please contact our friendly commercial sales team for a custom freight quote if delivery is required for a residential or non-commercial address.

Frequently Asked Questions

How does the double-walled design reduce running costs by up to 60%?

Standard single-walled commercial urns constantly radiate heat into the room through exposed metal walls, forcing the element to cycle on and off repeatedly to maintain temperature. The Apuro CX879-A features an insulated dual-layer stainless steel body that creates a thermal barrier, locking heat inside the reservoir. This reduces heat loss, brings water to temperature roughly 6 minutes faster, and cuts ongoing power consumption by up to 60%.

How well does this boiler retain heat when turned off?

Thanks to its double-walled insulation, the CX879-A retains heat for long periods without power. When switched off or unplugged, water temperature drops by only around 18°C over a two-hour period. This thermal retention makes it ideal for mobile food trailers, pop-up market stalls, and off-grid catering setups where available power points or generator capacities are limited.

Can standard commercial takeaway cups fit under the tap?

Yes. The durable non-drip lever tap provides 140mm of clearance from the counter base to the spout. This allows standard ceramic mugs, glassware, and standard commercial 8oz and 12oz takeaway coffee cups to sit upright beneath the tap without awkward angles or spills.

What should I do if the urn accidentally boils dry?

The CX879-A is fitted with an automatic thermal boil-dry cut-out switch that immediately cuts power to the concealed heating element if water runs dry. If this safety device is tripped, turn off and unplug the boiler, let it cool down for 15 to 20 minutes, refill the tank with clean cold water, and press the external thermal reset button located on the base of the unit to resume operation.

What electrical outlet is required?

The Apuro CX879-A draws 2.2kW (approx. 9.6 Amps) on standard Australian 230–240V single-phase power. It comes factory-fitted with a standard Australian 10 Amp plug, enabling direct plug-and-play installation into any ordinary commercial kitchen, catering trailer, or office wall socket without requiring a 15A electrical upgrade.

N.B Images are for illustrative purposes only. Specifications are subject to change without notice.