Apuro CX878-A 40L Energy Saving Water Boiler | Double-Wall 10A

The Apuro 40L Commercial Energy-Saving Manual Fill Water Boiler (CX878-A) is an extra-high-capacity, thermally insulated benchtop hot water urn engineered specifically for Australian catering companies, conference venues, function centres, sporting clubs, church halls, community groups, and high-volume commercial staff cafeterias. Sized at 490 mm Wide x 644 mm High and weighing 7.31 kg, this 40-litre manual-fill beverage boiler features an advanced double-walled stainless steel body that slashes running energy consumption by up to 60% compared to conventional single-skinned urns. Driven by a fast-heating 2.2kW concealed element running on standard Australian single-phase 230–240V mains power with a 10 Amp wall plug, the CX878-A reaches serving temperature roughly six minutes faster than non-insulated boilers while retaining heat with exceptional efficiency between 30°C and 100°C for continuous, high-volume tea, coffee, and hot drink service.

Why operators choose the Apuro CX878-A:

• Double-walled thermal insulation (up to 60% energy savings) — dual-skin stainless steel casing with specialised thermal insulation locks in heat, dramatically reducing standby heat loss, cutting ongoing power bills, and keeping the outer housing cooler to the touch.

• Rapid heating & minimal temperature loss — heats up to serving temperature approximately 6 minutes faster than single-wall units and holds heat so effectively that water drops only around 18°C over two full hours when turned off.

• Massive 40-litre commercial capacity — provides an expansive hot water reservoir to cater for large crowds, multi-day seminars, and high-turnover breakfast buffets without requiring staff to perform constant manual refills.

• Concealed 2.2kW heating element — element is positioned beneath the smooth, flat internal stainless steel base to eliminate direct contact with water, significantly reducing mineral limescale accumulation and simplifying routine descaling.

• Precision rotary temperature control — user-friendly mechanical thermostat dial allows accurate adjustment from 30°C/32°C up to 100°C, backed by an automatic keep-warm mode to preserve optimal holding heat without continuous boiling.

• Durable non-drip dispensing tap — commercial lever tap with a generous 140mm cup clearance height accommodates standard ceramic mugs, glassware, and takeaway coffee cups without awkward tilting.

• Boil-dry thermal safety cut-off — external safety cut-out switch with manual reset prevents element burnout and extends equipment lifespan if the reservoir boils dry.

• Stable non-slip countertop rubber feet — provides a rigid, skid-resistant base on smooth stainless steel benches, laminate servery tables, and mobile catering setups during peak service.

• Standard 10A plug-and-play installation — efficient 2200W power draw operates on standard Australian single-phase 230–240V mains power with a factory-fitted 10 Amp plug, requiring no 15A electrical circuits or hardwiring.

Technical Specifications

Operating & Service Notice

This commercial hot water boiler is engineered exclusively for heating and dispensing clean potable water; never add milk, cordial, tea bags, coffee grinds, or soup mixes directly into the tank. Always check that the water level covers the internal floor plate before switching on the power to prevent accidental tripping of the thermal safety switch. In hard-water areas across Australia, mineral scale will naturally accumulate over time; regularly descale the stainless steel interior and base plate using a food-grade commercial urn descaling solution to maintain heating speed and element efficiency. Always disconnect the power plug and allow the water to cool fully before wiping down the exterior with a soft, non-abrasive damp cloth.

Freight & Delivery Notice

Standard commercial delivery is available across Australia. Please contact our friendly commercial sales team for a custom freight quote if delivery is required for a residential or non-commercial address.

Frequently Asked Questions

What are the main differences between the Apuro CX877-A and CX878-A?

Both models share the same double-walled energy-saving stainless steel construction, 2.2kW concealed element, non-drip tap, and 10A plug. The primary distinction is capacity and height: the CX877-A holds 30 litres (585mm high), whereas the CX878-A holds an expanded 40 litres (644mm high), making it the optimal choice for large venues, conferences, and high-volume caterers looking to minimise mid-service refilling.

How does the double-walled design cut running costs by up to 60%?

Standard single-walled commercial urns continuously bleed heat into the room through exposed metal walls, causing the heating element to cycle on and off constantly to maintain water temperature. The Apuro CX878-A features an insulated dual-layer stainless steel body that creates a thermal barrier, locking heat inside the reservoir. This reduces standby heat loss, brings water to temperature roughly 6 minutes faster, and cuts ongoing electricity consumption by up to 60%.

How well does this boiler retain heat when switched off?

Thanks to its heavy-duty insulation, the CX878-A retains heat for hours without power. When switched off or unplugged, water temperature drops by only around 18°C over a two-hour period. This thermal retention makes it ideal for mobile food trailers, pop-up market stalls, and off-grid catering setups where available power points or generator capacities are limited.

Can standard commercial takeaway cups fit under the tap?

Yes. The durable non-drip lever tap provides 140mm of clearance from the counter base to the spout. This allows standard ceramic mugs, glassware, and standard commercial 8oz and 12oz takeaway coffee cups to sit upright beneath the tap without awkward angles or spills.

What electrical outlet is required?

The Apuro CX878-A draws 2.2kW (approx. 9.6 Amps) on standard Australian 230–240V single-phase power. It comes factory-fitted with a standard Australian 10 Amp plug, enabling direct plug-and-play installation into any ordinary commercial kitchen, catering trailer, or office wall socket without requiring a 15A electrical upgrade.

N.B Images are for illustrative purposes only. Specifications are subject to change without notice.