Zip 405062 Hydroboil Plus 5L Commercial Wall-Mounted Instant Boiling Water Unit (White)

The Zip 405062 Hydroboil Plus 5 Litre White Commercial Wall-Mounted Instant Boiling Water System is a premium, energy-efficient boiling water dispenser engineered specifically for Australian commercial offices, hospital staff rooms, school canteens, catering facilities, and corporate tea rooms. Sized at 329 mm Wide x 201 mm Deep x 473 mm High, this compact wall-mounted unit features a durable Colorbond® White case that delivers instant, boiling-hot water on demand while eliminating kettle wait times.

Featuring Zip's patented Steam-Heat-Boost™ twin-chamber technology, the Hydroboil Plus recycles energy from steam to pre-heat incoming cold water, maximizing energy efficiency. Outfitted with an integrated 0.2-micron MicroPurity™ filtration system, a 2.8-inch LCD digital display, PowerPulse™ electronic temperature control, self-calibration technology, high-performance insulation panels, and two user-adjustable energy-saving modes, it delivers 30 boiling cups at once with a rapid recovery rate of 150 cups per hour. Operating on a standard single-phase 2.4 kW / 240V / 10A power plug, it holds WaterMark and CE approvals, supported standard by a 5-Year Zip Warranty (24 months full appliance warranty plus an additional 36 months pro-rata tank warranty).

Why Choose the Zip 405062 Hydroboil Plus 5L Boiling Water Appliance?

Selecting the Zip 405062 Hydroboil Plus 5L Boiling Water Dispenser equips office managers, facility administrators, and commercial kitchen designers with an eco-friendly, ultra-safe hydration workstation designed for high traffic and low utility overheads.

Key benefits of the Zip 405062 Hydroboil Plus include:

• Instant Boiling Capacity (30 Cups Immediate / 150 Cups Recovery): Holds 5.0 litres of boiling water to dispense up to 30 boiling cups immediately during peak tea/coffee breaks, recovering up to 150 cups per hour.

• Steam-Heat-Boost™ Energy Recycling: Innovative twin-chamber heating design traps internal steam to pre-heat cold incoming water before it enters the boiling chamber, drastically cutting energy consumption.

• 0.2-Micron MicroPurity™ Water Filtration: Advanced integrated filtration removes chlorine, foul odours, heavy metals, sediment, and micro-contaminants down to 0.2 microns for pure, fresh-tasting hot beverages.

• 2.8" LCD Screen & Programmable Energy Modes: Intuitive digital screen enables precise electronic temperature control, self-calibration, and activation of 2 user-adjustable energy-saving sleep modes.

• PowerPulse™ Electronic Temperature Control: Maintains boiling water within a fraction of a degree of boiling point without wasting electricity or allowing water to go flat.

• Cool-Touch 2-Way Safety Tap: Heavy-duty, two-way safety tap remains cool to the touch during operation, featuring a fingertip control for quick cup fills and a lock-on position for filling larger tea pots and cafetières safely.

• Colorbond® White Casing & Moulded Insulation: Corrosion-resistant white powder-coated exterior with high-performance moulded insulation panels wrapped around the main tank to minimize heat loss.

• Comprehensive 5-Year Warranty Coverage: Backed by Zip's 24-month full parts and labour warranty plus a 36-month pro-rata tank warranty upon professional installation.

Technical Specifications

Site Installation Requirements

To ensure optimal performance and maintain manufacturer warranty coverage, observe the following setup guidelines:

1. Qualified Trade Installation: Installation and connection of your Zip wall-mounted upright boiling unit must be carried out by a qualified plumber and electrician in accordance with the manufacturer's instructions and all relevant AS/NZS 3500 plumbing and AS/NZS 3000 electrical standards.

2. Services Clearance: The unit requires connection to a potable cold water supply (12.7 mm 1/2" BSP) and a standard single-phase 220–240V 10A electrical outlet located in close proximity.

3. Operating Pressure Range: Incoming cold water supply pressure must be between 70 kPa and 500 kPa.

4. Hard Water Scale Protection: In hard water regions where mineral scale accumulation can build up, consideration should be given to ongoing maintenance. Installing a high-capacity scale-inhibiting filtration or water softening system is strongly recommended to protect internal heating tanks.

Operating & Cleaning Guidelines

1. First-Time Commissioning & Flushing: Once mounted and plumbed, turn on the cold water supply line and allow the internal 5.0L tank to fill completely. Plug in power to allow the LCD self-calibration sequence to complete. Flush the tap for 3 to 5 minutes to purge air and condition the 0.2-micron MicroPurity™ filter prior to drinking.

2. Daily Hygiene & Tap Safety: Wipe down the outer Colorbond® white case and cool-touch safety tap daily using a soft microfibre cloth and a mild food-safe cleaner. Use the two-way tap lever for quick cup dispensing or push back for continuous carafe filling.

3. Filter Maintenance: Replace the internal 0.2-micron MicroPurity™ filter cartridge every 6 to 12 months (or when prompted by the LCD screen) to maintain optimal water flow, taste, and protection against limescale.

Frequently Asked Questions

1. How many hot drinks can the Zip 405062 Hydroboil Plus dispense at once?

The Zip 405062 Hydroboil Plus holds 5.0 litres of boiling water, providing 30 boiling cups immediately at one time, recovering at a rapid rate of 150 cups per hour.

2. What technology makes the Hydroboil Plus energy efficient?

The Hydroboil Plus utilizes Steam-Heat-Boost™ technology, which captures steam energy created during boiling to pre-heat incoming cold water. Combined with PowerPulse™ heat regulation, high-performance insulation, and 2 programmable sleep modes, standby energy loss is reduced significantly.

3. Does the Zip 405062 require 15A power or 3-phase power?

No. The unit features a total power rating of 2.4 kW (220–240V / 50Hz) and plugs directly into a standard Australian 10 Amp single-phase wall socket.

4. What water filtration system is built into this unit?

The 405062 includes an integrated 0.2-micron MicroPurity™ filtration cartridge, which filters out sediment, chlorine taste, odours, and micro-contaminants down to 0.2 microns.

5. What warranty covers the Zip 405062 Hydroboil Plus?

This unit comes backed standard by a 5-Year Warranty, which includes 24 months of full parts and labour coverage on the appliance plus an additional 36 months pro-rata warranty on the internal boiling tank.

N.B Images are for illustrative purposes only. Specifications are subject to change without notice.