[THERMASTER_MSG]

Thermaster OC-1830B 810L Commercial Supermarket Open Front Beverage Display Multideck (R290 / Secop Compressor / 1890mm Wide)

Maximise self-service retail turnover, streamline grab-and-go customer flow, and merchandise fast-selling drinks with the Thermaster OC-1830B 810L Commercial Supermarket Open Front Beverage Display. Purpose-built for Australian supermarkets, convenience stores, petrol stations, large cafes, university food halls, corporate cafeterias, and airport kiosks where shoppers demand instant, frictionless access to chilled stock, this premium 1890 mm wide multideck open display chiller pairs an expansive 810-litre capacity (3.11 m² total display area) with energy-conscious European refrigeration engineering.

Barrier-Free Merchandising with 3.11 m² Display Area

Eliminating glass door barriers dramatically increases purchase frequency during high-volume trading rushes. The OC-1830B provides a generous 3.11 square metres of open display face, allowing patrons to view, reach, and select chilled beverages without delay. Designed with a compact, space-saving base footprint, it maximises vertical product pack-out while conserving vital floor walkways. A prominent illuminated top canopy provides prime front-of-house real estate for custom promotional branding, category signage, or drink advertising, while top-mounted energy-efficient LED lighting casts a vibrant, natural glow over every product tier.

European Secop Compressor & Eco-Friendly R290 Cooling Circuit

Consistent temperature stability in open-front multidecks requires heavy-duty thermodynamic capacity. The OC-1830B is driven by a premium Secop commercial compressor running on natural, zero-ODP R290 hydrocarbon refrigerant. Powered by dynamic fan-forced cooling, the unit creates a continuous air curtain that maintains steady product holding within a certified M2 temperature classification (+1°C to +7°C) across an operating spectrum down to -1°C to +7°C. It is calibrated for peak efficiency in controlled commercial environments rated up to 25°C ambient temperature with 60% relative humidity.

Double-Layer Night Blinds for Significant Energy Savings

Open-front refrigerated cases naturally exchange thermal energy with room air. To curb energy use and lower electricity costs, the OC-1830B is equipped with two heavy-duty double-layer night blinds. Simply pull the blinds down during trade breaks, quiet periods, or after hours to seal the cold air curtain inside the cabinet, significantly reducing compressor cycling and locking daily energy consumption to 31.2 kWh per 24 hours.

Multiplexable Seamless Line-Up (No Centre Mullion)

Expanding or reconfiguring your retail display aisle is effortless. The OC-1830B is engineered with a multiplexable frame design, allowing multiple units to be assembled side-by-side in a seamless modular line-up without an obstructing centre mullion. This creates a continuous, unbroken visual merchandise run across large retail floor plans. Inside, the heavy-duty adjustable shelves feature versatile angle adjustments (from 0° to 7° and up to 14° tilt) to tailor product presentation for stacked cans, upright bottles, or tetra packs.

Plug-and-Play Australian 15A Electrical Connection

Operating on single-phase 240V power with an 1800W power draw (approx. 7.5 Amps), the OC-1830B is supplied with a dedicated Australian 15 Amp plug and lead (featuring the larger earth pin). Backed by an extended 2+2 Year Commercial Warranty, it offers long-term operational peace of mind and dependable open-front merchandising.

Key Features & Benefits

• Expansive 810L Gross Capacity (3.11 m² Display Area): Generous 1890 mm wide multideck face maximizes beverage pack-out and category exposure.

• Open Grab-and-Go Access: Frictionless, door-free format accelerates customer selection and drives impulse sales during peak trading rushes.

• Premium European Secop Compressor: Engineered for rapid temperature pull-down, high thermodynamic efficiency, and dependable long-term cooling.

• Eco-Friendly R290 Hydrocarbon Refrigerant: Delivers high thermal displacement with zero ozone-depleting potential and ultra-low global warming impact.

• M2 Temperature Class Performance (+1°C to +7°C): Maintains optimal food-safe holding temperatures for juices, soft drinks, dairy products, cold brews, and ready-to-drink beverages.

• Dual Double-Layer Night Blinds Included: Dramatically cuts overnight and off-peak electricity draw by locking in the cold air blanket.

• Multiplexable Modular Design: Multiple units assemble side-by-side without an intrusive centre mullion for continuous, unbroken retail display runs.

• Angled Adjustable Shelving (0° to 7° / 14°): Shelves tilt forward to maintain clear product visibility and effortless gravity-feed front-facing.

• Illuminated Top Canopy Lightbox: Dedicated overhead panel highlights promotional branding and draws customer eyes from across the store.

• Top-Mounted LED Illumination: Casts clean, cool-white light across all product tiers without radiating heat into the chilled compartment.

• Compact Base Footprint (770 mm Deep): Maximises internal pack-out while preserving clear aisle space in busy retail layouts.

• Standard Australian 15A Plug Setup: 1800W heating and cooling capacity connects directly into standard 240V 15A commercial outlets.

• Extended 2+2 Year Warranty: Standard 2 Years Parts and Labour warranty, extendable by an additional 2 Years (Parts only) upon online product registration within 14 days of invoice.

Technical Specifications

Daily Care, Maintenance & End-of-Shift Sanitisation

To protect refrigeration efficiency, prevent compressor strain, and ensure commercial hygiene compliance:

1. Power Isolation: Before undertaking deep interior sanitisation, cleaning the air intake grilles, or adjusting shelf tiers, switch off the power point and disconnect the 15A plug from the wall outlet.

2. Double-Layer Night Blind Operation: Deploy the factory-fitted double-layer night blinds every evening at close of trade or during extended quiet hours. Pull the blinds down smoothly and hook them into the bottom retainers to prevent cold air spillage and lower power consumption.

3. Internal Air Return Grille Care: Inspect the bottom air return honeycomb grilles daily. Remove any fallen receipt paper, straw wrappers, plastic film, or loose bottles that may obstruct the lower intake. Restricting this intake disrupts the air curtain and leads to internal warming.

4. Internal Shelf & Deck Sanitisation: Wipe down internal shelves, bracket tracks, and the solid base display deck daily using warm water and a neutral commercial sanitiser. Dry thoroughly with a clean microfibre cloth. Avoid harsh abrasive pads, wire brushes, or chlorine-based bleaches that can degrade the surface coating.

5. Exterior Cabinet & Canopy Care: Clean the outer panels and illuminated canopy acrylic face with a soft microfibre cloth and a neutral, streak-free commercial cleaner.

6. Condenser Coil Dusting (Vital for Open Chiller Efficiency): Because open-front chillers circulate large volumes of ambient room air, dust, floor sweepings, and lint settle onto the condenser fins. Unplug the unit monthly and vacuum or gently brush the condenser fins with a soft brush attachment. A clogged condenser forces the Secop compressor to run continuously, driving up electricity use and risking premature failure.

7. Drainage Clearance: Inspect the internal condensate drainage channel and evaporator pan regularly to ensure condensation flows freely without blockages from spilled drinks or packaging debris.

8. Electrical Safety: Never wash down the open multideck with a commercial pre-rinse hose or high-pressure spray gun, and ensure wash water does not enter the canopy lighting, electrical switches, or base ventilation compartments.

Supermarket Placement & Operational Guidelines

The Thermaster OC-1830B is engineered for supermarket aisles, convenience store checkouts, and high-traffic food courts:

1. Dedicated 15A Electrical Circuit: The unit draws 1800W on standard single-phase 240V power and comes fitted with a heavy-duty Australian 15 Amp plug (with a wider earth pin). It strictly requires a dedicated 15A commercial wall outlet. Never use 10A-to-15A adaptors or standard extension cords.

2. Solid Floor Positioning & Structural Load: At 330 kg net weight (exceeding 850 kg when fully stocked with glass bottles, dairy, and cans), the OC-1830B must be installed on a completely flat, level, and reinforced commercial concrete floor. Ensure the unit is leveled accurately to maintain uniform air curtain velocity and proper condensate drainage.

3. Climate-Controlled Airflow Environment (Max 25°C / 60% RH): Open multideck display chillers rely on a stable, delicate air curtain to keep internal stock cold. They are designed exclusively for air-conditioned indoor environments operating up to 25°C and 60% relative humidity. Never position the unit directly opposite open exterior doorways, under ceiling fans, or directly beneath high-velocity air conditioning supply diffusers. External drafts disrupt the air curtain, blowing cold air into the store and pulling warm air into the case.

4. Thermal Separation & Direct Sunlight: Keep the display well clear of direct solar exposure through shopfront windows and away from radiant cooking equipment (such as rotisserie ovens, pie warmers, or fryers).

5. Pre-Chilled Stock Loading Protocol (Standard 3.2.2 Compliance): In accordance with Australian Commercial Food Safety Standards, open multideck chillers are holding units designed to maintain pre-chilled product temperatures (+1°C to +7°C).All beverages, dairy products, and sandwiches must be pre-chilled below +5°C in a coolroom before loading into the cabinet. Never use an open multideck display to pull down warm, ambient stock.

6. Load Limit Guidelines: Do not stack merchandise forward past the front edges of the shelves or block the rear wall air discharge perforations. Maintaining uninhibited internal airflow is essential for M2 temperature performance.

Freight & Delivery Notice

Standard commercial road freight delivery is available Australia-wide to commercial business addresses with level ground access or loading docks. Due to the 330 kg net weight, 1890 mm width, and 2067 mm vertical height of this commercial supermarket multideck, delivery via a tail-lift truck or to a commercial loading dock with heavy-duty pallet handling equipment is strictly required. For deliveries to residential, home-based business, or non-commercial addresses, please contact our friendly commercial sales team prior to ordering to obtain a customised courier quote and confirm delivery logistics.

Frequently Asked Questions

Can I plug this supermarket open beverage display into a standard Australian 10 Amp power point?

No. The Thermaster OC-1830B draws 1800W and comes fitted with an Australian 15 Amp plug (featuring a larger earth pin). It requires a dedicated single-phase 240V 15 Amp commercial wall socket connected to an appropriate circuit breaker.

What does "multiplexable without a mullion" mean?

Multiplexable means multiple OC-1830B units can be joined seamlessly side-by-side on the sales floor. Because the frame connects without a thick centre upright (mullion), the joined cabinets create a continuous, unbroken merchandising display that looks like one cohesive refrigeration system.

Why are night blinds included on this unit?

Open-front chillers consume more power than glass-door fridges because they operate without a physical door barrier. The included double-layer night blinds pull down easily outside trading hours to cover the open face, trapping the cold air curtain inside. This reduces thermal loss, lowers overnight electricity draw, and eases the load on the Secop compressor.

What does the M2 temperature classification mean?

Under commercial refrigeration standards, the M2 rating confirms that the cabinet maintains internal product core temperatures consistently between -1°C and +7°C under standard climate conditions (up to 25°C / 60% RH). This makes it fully compliant for holding commercial beverages, pasteurised dairy, cold brew, and grab-and-go packaged foods.

Can the shelves be angled forward?

Yes. The heavy-duty shelving brackets can be adjusted flat (0°) or angled downward (7° to 14°). Angling the shelves forward improves product visibility from a distance and allows beverages to slide forward automatically as front items are picked by customers.

How do I qualify for the extended 2+2 Year Warranty?

The unit comes standard with a 2 Years Commercial Parts and Labour warranty. By registering your product online with the manufacturer within 14 days of the invoice date, you receive an additional 2 Years of Parts-Only warranty coverage, securing four total years of manufacturer protection.

N.B Images are for illustrative purposes only. Specifications are subject to change without notice.