Thermaster LSC235 4-Sided Glass Beverage Fridge | 220L Ivory-White

[THERMASTER_MSG]

The Thermaster LSC235 Four-Sided Upright Beverage Display Fridge in Ivory-White is an eye-catching, 360-degree panoramic merchandising showcase engineered specifically for Australian cafes, boutique retail stores, juice bars, bakeries, sandwich shops, convenience stores, and front-of-house hospitality venues. Measuring 515 mm Wide x 485 mm Deep x 1618 mm High, this slimline vertical drink chiller offers a 220-litre gross capacity (168-litre usable net volume) designed to drive impulse grab-and-go sales while taking up minimal retail floorspace. Built with four sides of double-glazed glass, an elegant curved front hinged glass door, internal vertical LED illumination, digital temperature regulation (holding between 2°C and 8°C in ambient climates up to 32°C), and fan-forced evaporator cooling, the LSC235 presents chilled drinks, sparkling waters, cold-pressed juices, and canned beverages with visual clarity on a standard Australian 10A plug-and-play electrical connection.

Why Australian commercial venues choose the Thermaster LSC235:

• Four-sided 360° panoramic product visibility — full four-sided double-glazed glass walls combined with an elegant curved front glass door showcase stock from every angle, making it an effective standalone island display or counter-end merchandiser.

• Efficient fan-forced evaporator cooling — high-velocity internal convection fan circulates chilled air continuously around all shelves, eliminating warm spots and ensuring rapid temperature pull-down between frequent customer door openings.

• Precise digital temperature controls (2°C to 8°C) — external electronic digital controller and clear temperature read-out make it easy for staff to monitor and adjust holding conditions, keeping beverages chilled at optimal serving temperatures.

• Bright internal LED illumination — energy-saving internal LED lights illuminate merchandise uniformly across all tiers without radiating heat into the cabinet, reducing running costs while accentuating product branding.

• Automatic defrost cycle — automated defrost system prevents ice build-up on the internal evaporator coil, preserving consistent cooling performance without manual downtime.

• Eco-friendly, energy-conscious construction — features CFC- and HCFC-free high-density thermal insulation and double glazing to minimise thermal loss, achieving an efficient daily energy consumption rating of 5.183 kWh/24h.

• Durable Colorbond ivory-white finish — hard-wearing Colorbond steel and polymer frame provides a modern aesthetic that resists corrosion, chipping, and heavy retail wear while wiping clean in seconds.

• Adjustable levelling legs — sturdy, heavy-duty adjustable front feet ensure stability on sloping shopfront tiles or uneven retail flooring.

• Standard 10A plug-and-play installation — draws 260W on standard Australian 240V single-phase mains power, operating via a factory-fitted 10 Amp plug without the need for commercial circuit upgrades.

• Up to 4-year warranty coverage — backed by a standard 2-Year commercial parts and labour warranty, extendable to an additional 2-Year parts-only warranty upon product registration within 14 days of invoice.

Technical Specifications

Operating, Care & Preventative Maintenance

To maintain optimum cooling performance, clear glass clarity, and long compressor life:

1. Pre-Chilled Stock Loading: The Thermaster LSC235 is designed specifically as a refrigerated beverage holding and merchandising display. While fan-forced cooling recovers rapidly after door openings, always load the cabinet with pre-chilled stock to prevent internal temperature spikes and reduce compressor runtime.

2. Condenser Maintenance: A clogged condenser coil restricts airflow and forces the refrigeration system to run hotter and longer. Vacuum and brush dust, hair, and lint away from the lower condenser vents every 2 to 4 weeks using a soft brush attachment.

3. Double-Glazed Glass Care: Clean all four glass panels using a non-abrasive glass cleaner and clean microfibre cloths. Avoid harsh abrasive scouring pads, caustic window sprays, or solvent-based detergents that can scratch the glass or degrade the door gasket seals.

4. Air Circulation Clearance: Do not block the internal fan duct or pack cans hard against the rear internal airflow vents. Allowing unobstructed air circulation around products ensures uniform 2°C to 8°C temperatures across every shelf.

5. Door Gasket Inspection: Wipe down the magnetic door gasket weekly with warm soapy water to prevent sticky drink residues from hardening, ensuring an airtight perimeter seal when the curved door swings closed.

Electrical & Ventilation Installation Guidelines

The Thermaster LSC235 requires no complex plumbing or dedicated 15A electrical circuits:

1. Electrical Connection: Operates on standard Australian single-phase 240V power with an economical 260W power draw. Supplied with a factory-fitted 10 Amp plug and lead, allowing immediate plug-and-play installation on any standard commercial or domestic wall outlet.

2. Ventilation Clearances: Like all commercial glass-door refrigeration units, the internal refrigeration unit extracts heat out through the lower base vents. Maintain a minimum clearance of at least 100 mm from rear walls and surrounding cabinets to ensure unrestricted heat dissipation.

3. Positioning Notice: Avoid placing the display fridge in direct sunlight, in line with hot glass shopfronts, or directly beneath hot air conditioning exhaust vents, as excess solar radiant heat can cause condensation on exterior glass surfaces and compromise the 32°C ambient rating.

Freight & Delivery Notice

Standard commercial freight delivery is available across Australia to commercial business premises with level ground access or loading docks. Due to the unit's height (1618 mm), crated dimensions, and full four-sided glass panels requiring vertical transport, deliveries to residential or non-commercial addresses require a customised tail-lift freight quote. Please contact our friendly commercial sales team prior to placing your order to verify site access, delivery doorway clearances, and receiving logistics.

Frequently Asked Questions

What are the benefits of a four-sided glass beverage fridge compared to a standard solid-wall display fridge?

Standard commercial display fridges only feature glass on the front, leaving the sides enclosed in solid sheet metal. The Thermaster LSC235 features double-glazed glass on all four sides. This provides 360-degree viewing of your drinks, craft sodas, and kombuchas, allowing you to position the fridge in open floor areas, near entranceways, or at the end of service counters to draw customer eyes from multiple directions.

Can the shelves be adjusted to fit tall bottles and cartons?

Yes. The internal shelving system is fully height-adjustable, allowing you to reconfigure shelf spacing to suit 250ml slimline cans, standard 375ml soft drink cans, 500ml iced teas, 600ml water bottles, or 1-litre cold-pressed juice bottles.

Does the Thermaster LSC235 require a drain or plumbing connection?

No. The unit features an automatic off-cycle defrost system with an internal condensate vaporisation pan. Melted frost is channelled down to an integrated drip tray located above the compressor, where the natural heat generated by the refrigeration motor evaporates the water automatically. No floor wastes, drains, or plumbing lines are required.

Is the curved glass door reversible?

The LSC235 comes standard with a right-hand hinged curved glass door. The ergonomic curved handle and factory hinge alignment are designed for smooth, balanced customer access in high-turnover retail environments.

How do I activate the 4-year warranty coverage?

The Thermaster LSC235 includes a standard 2-Year commercial parts and labour warranty. Venue owners who register their purchase online with the manufacturer within 14 days of the original invoice date receive an additional 2-Year parts-only warranty extension, giving up to 4 years of comprehensive coverage across Australia.

N.B Image is for illustrative purposes only. Specifications are subject to change without notice.