Sammic UX-40SB DD Commercial Glasswasher 400x400mm | Double-Skinned 15A

Sammic UX-40SB DD Commercial Underbench Glasswasher & Light Dishwasher (400x400mm Basket / Sani-Control / 15A Plug)

Accelerate bar turnover, eliminate glassware thermal shock, and ensure certified hygienic wash cycles with the Sammic UX-40SB DD Commercial Underbench Glasswasher & Dishwasher. Designed and manufactured in Spain with over 50 years of European warewashing engineering, this high-performance 490 mm wide undercounter machine is purpose-built for Australian hospitality venues, high-turnover cocktail lounges, craft beer bars, boutique cafes, wine bistros, and hotel service passes. Powered by a high-efficiency hydraulic circuit using just 1.9 litres of water per cycle, the UX-40SB DD pairs certified thermal disinfection with an independent cold rinse to deliver clean, cool glassware ready for instant drink service.

Certified Sani-Control Disinfection (DIN 10534 Standard) & Thermal Lock

Australian food safety regulations demand verifiable warewashing sanitisation. The Sammic UX-40SB DD is engineered around Sani-Control technology, certified in strict compliance with the rigorous European DIN 10534 standard for hygienic ware disinfection. Its integrated Thermal Lock safety system monitors the internal boiler continuously, ensuring the machine never initiates the final rinse until the sanitising rinse temperature has been fully achieved. Whether dealing with stubborn lipstick marks, craft beer yeasts, or dairy proteins, your venue maintains total compliance with Food Standards Australia New Zealand (FSANZ) Standard 3.2.2.

Hydroblade Composite Wash Arms & 30% Efficiency Gain

The UX-40SB DD introduces Sammic’s patented composite Hydroblade wash and rinse arms, engineered to be significantly lighter than traditional stainless steel arms. This weight reduction allows smooth rotation at lower water pressures, creating a sharper, more uniform curtain of water with higher impact velocity. The deep-drawn wash tank design facilitates the partial renewal of wash water after each cycle, preventing soil saturation and delivering up to 30% savings in water, chemical detergent, and energy compared to previous generations. The clever linear design also allows operators to remove scrap filters without detaching the wash arm first.

Double-Skinned Acoustic & Thermal Insulation with 300 mm Clearance

Operating a warewasher front-of-house in a quiet cafe or open bar requires low noise output. The UX-40SB DD features a full double-walled stainless steel body, significantly dampening operating noise while preventing radiant heat loss to keep the outer skin cool to the touch. Standing at an undercounter-friendly 710 mm height, the machine provides an expanded 300 mm internal loading clearance on standard 400 mm × 400 mm racks, accommodating oversized craft beer chalices, tall cocktail carafes, champagne flutes, saucers, and entree plates. Optional extra rack guides can also be installed to wash two low-profile baskets simultaneously, effectively doubling your output.

5 Intuitive Wash Programmes, Wash Plus+ & Soft Start

Operated via a wide-angle colour LCD screen with clear icon and colour coding, staff can cycle through 5 preset wash programmes (90, 120, 150, and 180 seconds) alongside a dedicated cold rinse cycle. For heavily soiled items, the Wash Plus+ function increases washing intensity with a single touch. To protect delicate crystal, fine wine stems, and brittle barware, an integrated Soft Start feature ramps up the 250W wash pump motor gradually, preventing high-pressure water surges from tipping or chipping glassware.

Fully Integrated Pumps & Genuine Plug-and-Play Setup

The UX-40SB DD comes fully equipped straight from the factory to streamline underbench installation:

• Automatic Drain Pump: Enables smooth drainage into raised waste standpipes or under-sink traps without relying on gravity fall.

• Peristaltic Detergent & Rinse Aid Dosing Equipment: Delivers precise chemical calibration on every cycle, preventing cloudy streaks and excess chemical waste.

• 3-Stage Debris Filtration: Multi-stage filtration traps fine particulate debris, keeping wash water clear and protecting internal pump impellers.

• Independent Cold Rinse Function: Flushes glasses with cold mains water immediately following hot sanitisation, cooling glassware so beer heads stay stable and cocktails stay chilled.

Dedicated Single-Phase 15A Electrical Power

Operating with a total electrical loading of 2750W on single-phase 230V/240V power, the UX-40SB DD comes supplied with a dedicated Australian 15 Amp plug and lead (featuring the larger earth pin). This provides the rapid thermal recovery needed for continuous back-to-back cycling during peak weekend trading. Backed by a comprehensive 12 Months Commercial Parts and Labour Warranty, it provides dependable, low-utility European warewashing for demanding hospitality environments.

Key Features & Benefits

• Sani-Control Certified Disinfection (DIN 10534): Delivers verified thermal sanitisation compliant with strict commercial hospitality food safety standards.

• Patented Composite Hydroblade Arms: Lightweight linear design delivers uniform water spray panels and allows filter removal without detaching the arms.

• Low 1.9L Water Consumption Per Cycle: High-efficiency hydraulic circuit reduces water, chemical, and energy consumption by up to 30%.

• Independent Cold Rinse Cycle: Cools glasses instantly at the end of the cycle for fast craft beer, cider, and cocktail service.

• Double-Walled Body Construction: Traps internal heat for faster cycle recovery while significantly dampening acoustic noise in front-of-house areas.

• Generous 300 mm Loading Clearance: Easily accommodates tall cocktail glassware, stemware, carafes, coffee mugs, and entree plates.

• 5 Versatile Wash Programmes (90 to 180s) + Wash Plus+: Tailors cycle duration and washing intensity to soil levels with a single button press.

• Full-Colour Wide-Angle LCD Display: Displays cycle status, temperature verification, and user warnings with clear icon and colour coding.

• Soft Start Pump Protection: Progressively builds pump pressure to prevent delicate glasses and stemware from colliding or tipping.

• Fully Integrated Pumping Suite: Includes factory-fitted automatic drain pump, detergent dosing pump, and rinse aid injector.

• 3-Stage Tank Filter System: Captures micro-debris, keeping the 9-litre wash tank clean and shielding internal pump components.

• Complete Starter Accessory Kit: Includes 1 × flat basket, 1 × plate rack insert, and 1 × small cutlery basket for immediate service operation.

• Dedicated Australian 15A Plug Setup: 2750W power rating connects straight into standard single-phase 240V 15A commercial power points.

• 12 Months Warranty: Backed by 12 Months Parts and Labour commercial warranty coverage.

Technical Specifications

Daily Care, Maintenance & End-of-Shift Sanitisation

To protect washing performance, prevent scale accumulation, and ensure commercial hygiene compliance:

1. Power Isolation: Before undertaking routine cleaning, removing filters, or inspecting chemical tubes, switch off the machine via the LCD control panel and isolate the 15A power point.

2. Automated End-of-Shift Drainage: At the conclusion of service, trigger the automated drain cycle through the digital controller to empty the 9-litre wash tank completely. Never allow dirty wash water to sit in the cabinet overnight.

3. 3-Stage Scrap Filter Cleaning: Thanks to the Hydroblade arm's linear design, lift out the 3-stage filter plates directly without having to unscrew the wash arm. Rinse scrap plates in a sink under running water to clear citrus pulp, straw wrappers, seeds, and coffee grounds before reseating.

4. Hydroblade Arm Inspection: Periodically unclip the upper and lower composite Hydroblade wash and rinse assemblies. Inspect nozzles for mineral scale or debris obstructions. Rinse the lightweight arms thoroughly and click them back into their retaining housings.

5. Chemical Line Maintenance: Check the clear peristaltic detergent and rinse aid feeder tubes weekly. Confirm that weighted suction filters remain submerged in chemical drums and that lines are primed and free of dried, crystallised chemical build-up.

6. Water Treatment & Descaling: In Australian municipal or regional hard-water areas, connect the machine to a commercial water treatment filter or softener. Descale the wash tank and boiler elements periodically using a commercial food-grade descaler to prevent limescale buildup and maintain heating efficiency.

7. Exterior Stainless Steel Care: Wipe down external panels, the 'Easy-Grip' door handle, and the LCD screen daily using a soft microfibre cloth dampened with warm water and a neutral commercial cleaner. Avoid abrasive scouring pads, wire wool, or chlorine bleaches.

8. Washdown Safety: Never wash down the machine with a high-pressure hose or commercial pre-rinse spray gun. Ensure liquids do not penetrate the electronic display screen or lower mechanical access louvres.

Kitchen & Bar Placement Guidelines

The Sammic UX-40SB DD is engineered for front-of-house bars, cafe workstations, and tight service passes:

1. Dedicated 15A Power Supply: The machine has a total electrical loading of 2750W on single-phase 230V/240V power and comes fitted with an Australian 15 Amp plug (with a wider earth pin). It strictly requires a dedicated 15A commercial wall outlet connected to an appropriate circuit breaker. Never use domestic 10A-to-15A adaptors or standard extension cords.

2. Plumbing Supply & Dynamic Pressure: Connect the flexible inlet hose to a 3/4-inch BSP water supply connection (recommended inlet temperature: 50°C for fastest cycle turnaround; cold water supply is acceptable but will extend boiler reheat times). Maintain mains dynamic water pressure between 200 kPa and 400 kPa. If mains pressure exceeds 400 kPa, fit a commercial pressure-reducing valve.

3. Drainage Connection: Thanks to the factory-fitted automatic drain pump, the discharge hose can connect into a standard 40 mm standpipe or under-sink spigot located up to 600 mm above finished floor level. Avoid sharp kinks or tight loops in the discharge line.

4. Underbench Levelling: Slide the 41.5 kg unit into the undercounter cavity and adjust the threaded levelling feet until the machine sits plumb and level. Proper levelling prevents water pooling and ensures the counterbalanced door closes with a tight perimeter seal.

5. Barware Pre-Scrapping: Always tip out ice cubes, stirrers, straws, and citrus wedges into a bar waste bin before loading glasses into the rack. This protects the 3-stage filtration system and prevents pump impeller clogs.

Freight & Delivery Notice

Standard commercial road freight delivery is available Australia-wide to commercial business addresses with level ground access or loading docks. For deliveries to residential, home-based business, or non-commercial addresses, please contact our friendly commercial sales team prior to ordering to obtain a customised courier quote and confirm delivery logistics.

Frequently Asked Questions

Can I plug this commercial glasswasher into a standard Australian 10 Amp power point?

No. The Sammic UX-40SB DD has a total electrical rating of 2750W to power the wash pump, tank element, and boiler simultaneously. It is fitted with an Australian 15 Amp plug (featuring a larger earth pin) and strictly requires a dedicated 240V 15 Amp commercial outlet.

What is the benefit of the Sani-Control DIN 10534 certification?

DIN 10534 is an international standard that certifies the microbiological disinfection performance of commercial warewashers. Sani-Control paired with Thermal Lock ensures every cycle reaches the necessary temperature and contact time to kill harmful bacteria, guaranteeing compliance with Australian Food Safety Standard 3.2.2.

Why does this model feature an independent cold rinse?

Standard hot rinses leave glasses hot to the touch. Pouring chilled beer or sparkling wine into hot glassware causes premature carbonation loss, collapses the foam head, and warms the beverage. The independent cold rinse flushes glasses with fresh cold water at the end of the cycle, allowing staff to pour cold drinks immediately.

Can I clean the filters without removing the wash arms?

Yes. Sammic's linear Hydroblade arm profile allows you to lift out the 3-stage scrap filter system directly from the deep-drawn tank without having to unclip or unscrew the wash arms first, speeding up daily cleaning.

Does this unit come with detergent and drain pumps pre-installed?

Yes. The UX-40SB DD comes fully configured from the factory with an integrated automatic drain pump, peristaltic detergent dispenser, and rinse aid dosing injector, eliminating the need to purchase external pump kits.

What size baskets does this machine accept?

The unit uses standard 400 mm × 400 mm commercial warewashing racks. It comes supplied with 1 × open flat basket, 1 × plate rack insert, and 1 × small cutlery basket.

N.B Images are for illustrative purposes only. Specifications are subject to change without notice.