[MODULAR_SYSTEMS_MSG]
The Modular Systems DSBD7-1500R/A Stainless Steel Right Inlet Double Sink Dishwasher Bench is an expansive, heavy-duty commercial wash station engineered specifically for Australian commercial kitchens, restaurants, catering venues, bakeries, and high-volume food processing facilities. Measuring 1500mm in width, with a standard 700mm depth and a 900mm working height, this double sink bench features a Right-Hand Inlet orientation—meaning when facing the bench, the dishwasher inlet connection and double sink assembly are situated on the right-hand side for seamless integration with commercial pass-through dishwashers.
Constructed from premium 1.2mm SUS304 (18/8) food-grade stainless steel, the benchtop includes two fully welded, polished sink bowls (450mm W x 450mm D x 300mm H each with standard 90mm drain holes) and a protective 15mm wet edge to prevent water spillage across the drying workspace. The bench surface is reinforced with an internal 15mm XPS insulation board and multiple stainless steel 'U' channel under-supports, providing an extraordinary 360kg load rating. Complete with an integrated 150mm high stainless steel-backed splashback, 42mm diameter stainless steel legs, and fully adjustable polished disc feet, this bench delivers maximum hygienic performance and durability across mid-to-large dishwashing setups. Supplied flat-packed for cost-effective transport, it includes all required assembly tools and instructions and is backed by a 2-Year Parts-Only Warranty.
Choosing the Modular Systems DSBD7-1500R/A Double Sink Dishwasher Bench equips commercial kitchen wash areas with an ultra-durable, hygienic, and highly functional benchtop solution.
Key reasons commercial kitchen operators specify the Modular Systems DSBD7-1500R/A include:
Heavy-Duty 360kg Benchtop Load Capacity: Heavy-duty 1.2mm SUS304 stainless steel benchtop lined with a 15mm XPS board and multiple stainless steel 'U' channels easily holds heavy pot loads, dish racks, and commercial dishwashing equipment up to 360kg.
Dual Fully Welded Commercial Sink Bowls: Features two spacious 450mm x 450mm x 300mm deep sink bowls, fully welded and polished inside and out, each equipped with a standard 90mm drain hole for rapid drainage and basket waste fitting.
Right-Hand Inlet Configuration: Purpose-designed right-side orientation aligns perfectly with pass-through dishwashers when facing the unit, creating an efficient pre-rinse and wash workflow.
15mm Wet Edge Spillage Protection: Engineered with a raised 15mm wet edge perimeter around the benchtop to contain water splashes and prevent liquid overflow onto kitchen floors.
Integrated 150mm Fully Enclosed Splashback: Features a 150mm high x 30mm thick bevelled, stainless steel-backed splashback that seals tightly against rear walls to eliminate moisture traps and food buildup.
Adjustable Polished Stainless Steel Disc Feet: Sturdy 42mm diameter 1.2mm stainless steel legs feature fully adjustable polished disc feet to ensure precise levelling on uneven commercial kitchen floors.
Flat-Packed Design for Quick Assembly: Ships flat-packed for reduced shipping freight costs, including complete step-by-step instructions and all necessary assembly tools.
Castor Kit Compatibility: Designed to fit optional lockable castor wheel kits for mobile kitchen cleaning access and flexible station configurations.
2-Year Warranty Protection: Supported by a 2-Year Parts-Only Warranty for reliable long-term service.
| Feature | Specification |
| Brand / Model | Modular Systems DSBD7-1500R/A |
| Product Type | Commercial Stainless Steel Double Sink Dishwasher Bench (Right Inlet) |
| Orientation | Right Hand Inlet (Dishwasher inlet & double sink on right when facing bench) |
| Bench Dimensions (WxDxH) | 1500 mm W x 700 mm D x 900 mm Working Height |
| Bowl Dimensions (WxDxH) | 2 x Bowls: 450 mm W x 450 mm D x 300 mm H (90 mm Ø Drain Holes) |
| Benchtop Construction | 1.2 mm SUS304 (18/8) Food-Grade Stainless Steel with 15 mm Wet Edge |
| Sub-Bench Reinforcement | 15 mm Thick XPS Insulation Board Panel + Stainless Steel 'U' Channels |
| Max Load Weight Capacity | 360.0 kg Total Static Load Rating |
| Splashback Specifications | 150 mm High x 30 mm Thick (Bevelled, fully enclosed & S/S backed) |
| Leg Assembly | 4 x 42 mm Diameter Legs (1.2 mm S/S with adjustable polished disc feet) |
| Mobility Options | Optional Lockable Castor Kits Available Separately |
| Assembly & Delivery | Supplied Flat-Packed with Complete Tool Kit & Instruction Manual |
| Warranty | 2 Years Parts Only Warranty |
Orientation Notice: When standing directly in front of and facing the bench, the dishwasher inlet connection and double sink bowls are positioned on your RIGHT side.
Delivery & Freight Notice: Commercial equipment requires dedicated freight handling. Please contact our commercial sales team for a custom freight quote if delivery is required for a residential or non-commercial address.
Unpacking & Component Inspection: Unpack the flat-packed bench carton on a clean, soft surface. Verify all components, including the 1.2mm SUS304 double sink benchtop, 4 x stainless steel legs, adjustable disc feet, assembly tool kit, and instruction manual are present.
Leg Insertion & Tightening: Invert the benchtop onto a protective mat. Insert the 4 x 42mm diameter stainless steel legs into the pre-welded under-bench sockets. Secure each leg tightly using the provided fixing hardware and tools.
Upright Positioning & Levelling: Carefully flip the bench upright and position it adjacent to your pass-through dishwasher. Rotate the adjustable polished stainless steel disc feet to level the bench top across uneven floor surfaces before connecting plumbing waste lines and sealing the 150mm splashback against the wall.
"Right Inlet" means that when you are standing directly in front of and facing the bench, the dishwasher inlet connection and sink area are positioned on your right-hand side.
The bench features two fully welded and polished stainless steel sink bowls, each measuring 450mm Wide x 450mm Deep x 300mm Deep, with standard 90mm diameter drain holes.
The Modular Systems DSBD7-1500R/A 1500mm wide bench has a rated static load weight capacity of 360kg, thanks to its 1.2mm SUS304 stainless steel construction, internal 15mm XPS lining board, and multiple stainless steel 'U' channel reinforcements.
Yes. Optional heavy-duty lockable castor kits are available separately to convert the stationary leg setup into a mobile workstation for easier floor cleaning.
No. To minimise freight costs and reduce transport damage, the bench is supplied flat-packed. However, it is specifically designed for fast assembly and comes complete with an instruction manual and the necessary tools.
N.B Images are for illustrative purposes only. Specifications are subject to change without notice.
[MODULAR_SYSTEMS_MSG]
The Modular Systems DSBD7-1500R/A Stainless Steel Right Inlet Double Sink Dishwasher Bench is an expansive, heavy-duty commercial wash station engineered specifically for Australian commercial kitchens, restaurants, catering venues, bakeries, and high-volume food processing facilities. Measuring 1500mm in width, with a standard 700mm depth and a 900mm working height, this double sink bench features a Right-Hand Inlet orientation—meaning when facing the bench, the dishwasher inlet connection and double sink assembly are situated on the right-hand side for seamless integration with commercial pass-through dishwashers.
Constructed from premium 1.2mm SUS304 (18/8) food-grade stainless steel, the benchtop includes two fully welded, polished sink bowls (450mm W x 450mm D x 300mm H each with standard 90mm drain holes) and a protective 15mm wet edge to prevent water spillage across the drying workspace. The bench surface is reinforced with an internal 15mm XPS insulation board and multiple stainless steel 'U' channel under-supports, providing an extraordinary 360kg load rating. Complete with an integrated 150mm high stainless steel-backed splashback, 42mm diameter stainless steel legs, and fully adjustable polished disc feet, this bench delivers maximum hygienic performance and durability across mid-to-large dishwashing setups. Supplied flat-packed for cost-effective transport, it includes all required assembly tools and instructions and is backed by a 2-Year Parts-Only Warranty.
Choosing the Modular Systems DSBD7-1500R/A Double Sink Dishwasher Bench equips commercial kitchen wash areas with an ultra-durable, hygienic, and highly functional benchtop solution.
Key reasons commercial kitchen operators specify the Modular Systems DSBD7-1500R/A include:
Heavy-Duty 360kg Benchtop Load Capacity: Heavy-duty 1.2mm SUS304 stainless steel benchtop lined with a 15mm XPS board and multiple stainless steel 'U' channels easily holds heavy pot loads, dish racks, and commercial dishwashing equipment up to 360kg.
Dual Fully Welded Commercial Sink Bowls: Features two spacious 450mm x 450mm x 300mm deep sink bowls, fully welded and polished inside and out, each equipped with a standard 90mm drain hole for rapid drainage and basket waste fitting.
Right-Hand Inlet Configuration: Purpose-designed right-side orientation aligns perfectly with pass-through dishwashers when facing the unit, creating an efficient pre-rinse and wash workflow.
15mm Wet Edge Spillage Protection: Engineered with a raised 15mm wet edge perimeter around the benchtop to contain water splashes and prevent liquid overflow onto kitchen floors.
Integrated 150mm Fully Enclosed Splashback: Features a 150mm high x 30mm thick bevelled, stainless steel-backed splashback that seals tightly against rear walls to eliminate moisture traps and food buildup.
Adjustable Polished Stainless Steel Disc Feet: Sturdy 42mm diameter 1.2mm stainless steel legs feature fully adjustable polished disc feet to ensure precise levelling on uneven commercial kitchen floors.
Flat-Packed Design for Quick Assembly: Ships flat-packed for reduced shipping freight costs, including complete step-by-step instructions and all necessary assembly tools.
Castor Kit Compatibility: Designed to fit optional lockable castor wheel kits for mobile kitchen cleaning access and flexible station configurations.
2-Year Warranty Protection: Supported by a 2-Year Parts-Only Warranty for reliable long-term service.
| Feature | Specification |
| Brand / Model | Modular Systems DSBD7-1500R/A |
| Product Type | Commercial Stainless Steel Double Sink Dishwasher Bench (Right Inlet) |
| Orientation | Right Hand Inlet (Dishwasher inlet & double sink on right when facing bench) |
| Bench Dimensions (WxDxH) | 1500 mm W x 700 mm D x 900 mm Working Height |
| Bowl Dimensions (WxDxH) | 2 x Bowls: 450 mm W x 450 mm D x 300 mm H (90 mm Ø Drain Holes) |
| Benchtop Construction | 1.2 mm SUS304 (18/8) Food-Grade Stainless Steel with 15 mm Wet Edge |
| Sub-Bench Reinforcement | 15 mm Thick XPS Insulation Board Panel + Stainless Steel 'U' Channels |
| Max Load Weight Capacity | 360.0 kg Total Static Load Rating |
| Splashback Specifications | 150 mm High x 30 mm Thick (Bevelled, fully enclosed & S/S backed) |
| Leg Assembly | 4 x 42 mm Diameter Legs (1.2 mm S/S with adjustable polished disc feet) |
| Mobility Options | Optional Lockable Castor Kits Available Separately |
| Assembly & Delivery | Supplied Flat-Packed with Complete Tool Kit & Instruction Manual |
| Warranty | 2 Years Parts Only Warranty |
Orientation Notice: When standing directly in front of and facing the bench, the dishwasher inlet connection and double sink bowls are positioned on your RIGHT side.
Delivery & Freight Notice: Commercial equipment requires dedicated freight handling. Please contact our commercial sales team for a custom freight quote if delivery is required for a residential or non-commercial address.
Unpacking & Component Inspection: Unpack the flat-packed bench carton on a clean, soft surface. Verify all components, including the 1.2mm SUS304 double sink benchtop, 4 x stainless steel legs, adjustable disc feet, assembly tool kit, and instruction manual are present.
Leg Insertion & Tightening: Invert the benchtop onto a protective mat. Insert the 4 x 42mm diameter stainless steel legs into the pre-welded under-bench sockets. Secure each leg tightly using the provided fixing hardware and tools.
Upright Positioning & Levelling: Carefully flip the bench upright and position it adjacent to your pass-through dishwasher. Rotate the adjustable polished stainless steel disc feet to level the bench top across uneven floor surfaces before connecting plumbing waste lines and sealing the 150mm splashback against the wall.
"Right Inlet" means that when you are standing directly in front of and facing the bench, the dishwasher inlet connection and sink area are positioned on your right-hand side.
The bench features two fully welded and polished stainless steel sink bowls, each measuring 450mm Wide x 450mm Deep x 300mm Deep, with standard 90mm diameter drain holes.
The Modular Systems DSBD7-1500R/A 1500mm wide bench has a rated static load weight capacity of 360kg, thanks to its 1.2mm SUS304 stainless steel construction, internal 15mm XPS lining board, and multiple stainless steel 'U' channel reinforcements.
Yes. Optional heavy-duty lockable castor kits are available separately to convert the stationary leg setup into a mobile workstation for easier floor cleaning.
No. To minimise freight costs and reduce transport damage, the bench is supplied flat-packed. However, it is specifically designed for fast assembly and comes complete with an instruction manual and the necessary tools.
N.B Images are for illustrative purposes only. Specifications are subject to change without notice.
Related Products
Modular Systems
Modular Systems SSBD7-1500R/A Stainless Steel Right Inlet Single Sink Dishwasher Bench (1500mm)
Modular Systems
Modular Systems DSBD7-1800R/A Stainless Steel Right Inlet Double Sink Dishwasher Bench (1800mm)
Modular Systems
Modular Systems DSBD7-2400L/A Left Inlet Double Sink Dishwasher Bench (2400mm)
Modular Systems
Modular Systems WBBD7-1500R/A All Premium Stainless Steel Dishwasher Bench Right Outlet (1500mm)
Modular Systems
2400mm Stainless Steel Double Bowl Dishwasher Bench with Right Inlet | DSBD7-2400R/A
Request Callback Form
