LUUS
Luus FSP-60 Freestanding Commercial Gas Stockpot Boiler (600mm Wide)
The LKK-1BSP Commercial Gas Single Stockpot Cooker is a heavy-duty, high-output stockpot stove engineered specifically for Australian Asian restaurants, soup venues, stock houses, catering operations, and busy commercial kitchens. Sized at 600 mm Wide x 730 mm Deep x 520 mm High, this compact, low-profile floor-standing stockpot burner is built for all-day continuous boiling, delivering a massive heat output of 115 MJ/h (Natural Gas) or 88 MJ/h (LPG) to bring large vats of broth, soup, and stock to a rolling boil fast.
Constructed from premium AISI 304 grade stainless steel on both the frame and exterior body, the LKK-1BSP features a powerful 18-jet duckbill burner paired with an ultra-heavy-duty cast-iron trivet capable of supporting stockpots up to 600 mm x 600 mm and a maximum static load of 300 kg. Engineered for effortless operator control and kitchen ergonomics, it incorporates a flat front panel designed for both hand-turn or knee-push valve operation, a standing pilot light, Flame Failure Device (FFD) safety, a removable slide-out spillage tray, and height-adjustable stainless steel feet. Certified under IAPMO GasMark (#GMK10268), it connects via a standard 3/4" BSP gas connection.
Selecting the LKK-1BSP Gas Stockpot Cooker equips venue operators and head chefs with a certified, high-MJ stock stove built to handle extreme pot weights, maximize thermal efficiency, and simplify kitchen sanitation.
Key advantages of the LKK-1BSP include:
High-Output 18-Jet Duckbill Burner (Up to 115 MJ/h): Delivers intense, even thermal heat output (115 MJ/h NG / 88 MJ/h LPG) to rapidly boil large stockpots and maintain temperature stability over all-day cooking cycles.
Extreme 300kg Trivet Capacity: Reinforced, heavy-duty cast-iron trivet securely supports large commercial stockpots up to 600 mm x 600 mm in size and up to 300 kg in total weight.
Ergonomic Hand-Turn or Knee-Push Controls: Smooth flat front control panel layout allows staff to adjust flame settings using either hand-turn or convenient knee-push operation during busy prep shifts.
Full AISI 304 Stainless Steel Frame & Body: Premium 304-grade stainless steel chassis and external bodywork offer maximum resistance to corrosion, rust, and physical impact damage.
Flame Failure Protection & Pilot Light Standard: Equipped standard with a standing pilot ignition and Flame Failure Device (FFD) to ensure full safety compliance across all Australian commercial kitchens.
Removable Waste Spillage Tray: Includes a slide-out stainless steel spillage tray beneath the burner ring to capture overflow, grease, and food debris for fast shift clean ups.
IAPMO GasMark Certified (GMK10268): Fully certified under IAPMO GasMark Approval #GMK10268 to satisfy all Australian state and territory commercial gas safety regulations.
| Feature | Specification Details |
| Brand & Range | LKK Commercial Heavy Duty Series |
| Model Code | LKK-1BSP |
| Product Type | Commercial Floor-Standing Single Gas Stockpot Cooker |
| Gas Approval Certification | IAPMO GasMark Certified (#GMK10268) |
| Natural Gas Consumption | 115 MJ/h Input (Natural Gas) |
| LPG Consumption | 88 MJ/h Input (Liquid Petroleum Gas) |
| Burner Configuration | High-Output 18-Jet Duckbill Burner |
| Pot Capacity & Weight Limit | Accommodates stockpots up to 600 mm x 600 mm | Supports max weight of 300 kg |
| Control System | Flat Front Panel for Hand-Turn or Knee-Push Valve Operation |
| Safety System | Flame Failure Device (FFD) & Standing Pilot Standard |
| Frame & Body Material | All Commercial AISI 304 Grade Stainless Steel Frame & Exterior Body |
| Trivet Type | Extra Heavy-Duty Cast-Iron Trivet |
| Waste System | Removable Stainless Steel Slide-Out Spillage Tray |
| Levelling & Legs | Height-Adjustable Stainless Steel Feet |
| Gas Supply Inlet | 3/4" BSP Male (GI) |
| External Dimensions (WxDxH) | 600 mm W x 730 mm D x 520 mm H |
Gas Installation & Commissioning Notice: Under Australian law, all commercial gas equipment must be installed and commissioned by a licensed gas fitter in accordance with AS/NZS 5601 standards. Proof of licensed gas commissioning is required to validate manufacturer warranty coverage.
Delivery & Freight Notice: Commercial heavy cooking equipment requires dedicated freight handling. Please contact our friendly sales team for a custom freight quote if delivery is required for a residential or non-commercial address.
Setup & Commissioning: Ensure an authorized gas plumber connects the 3/4" BSP gas line (NG or LPG), verifies gas operating pressure, and completes official commissioning. Adjust the levelling feet to ensure absolute stability on the kitchen floor.
Ignition & Operation: Light the standing pilot flame following safety guidelines. Push and turn the gas valve handle (using hand or knee operation) to ignite the 18-jet duckbill burner. Adjust flame height to toggle between rapid boiling and slow stock simmering.
Daily Hygiene & Servicing: Turn off the gas supply and allow the unit to cool completely. Lift off the cast-iron trivet for cleaning in warm, soapy water. Slide out the bottom spillage tray to empty debris and wipe down 304 stainless steel exterior panels with a mild commercial degreaser.
The LKK-1BSP is designed with a wide, reinforced top footprint capable of accommodating stockpots up to 600 mm x 600 mm in size, with a maximum static load weight rating of 300 kg.
Yes. The unit produces 115 MJ/h heat output on Natural Gas and 88 MJ/h heat output on LPG. Please specify your venue's gas supply connection type when placing your order.
The flat front control panel is engineered with smooth-action valves positioned at knee height. This allows busy chefs carrying heavy, filled stockpots to adjust or shut off the gas flame using knee pressure without needing to free their hands.
The stockpot cooker comes standard with a Flame Failure Device (FFD) and a standing pilot light, automatically shutting off the gas supply if the flame goes out.
The LKK-1BSP holds official IAPMO GasMark Certification (#GMK10268), confirming full compliance with all Australian commercial gas safety and manufacturing standards.
*Images are for illustrative purposes only. Specifications are subject to change without notice.
The LKK-1BSP Commercial Gas Single Stockpot Cooker is a heavy-duty, high-output stockpot stove engineered specifically for Australian Asian restaurants, soup venues, stock houses, catering operations, and busy commercial kitchens. Sized at 600 mm Wide x 730 mm Deep x 520 mm High, this compact, low-profile floor-standing stockpot burner is built for all-day continuous boiling, delivering a massive heat output of 115 MJ/h (Natural Gas) or 88 MJ/h (LPG) to bring large vats of broth, soup, and stock to a rolling boil fast.
Constructed from premium AISI 304 grade stainless steel on both the frame and exterior body, the LKK-1BSP features a powerful 18-jet duckbill burner paired with an ultra-heavy-duty cast-iron trivet capable of supporting stockpots up to 600 mm x 600 mm and a maximum static load of 300 kg. Engineered for effortless operator control and kitchen ergonomics, it incorporates a flat front panel designed for both hand-turn or knee-push valve operation, a standing pilot light, Flame Failure Device (FFD) safety, a removable slide-out spillage tray, and height-adjustable stainless steel feet. Certified under IAPMO GasMark (#GMK10268), it connects via a standard 3/4" BSP gas connection.
Selecting the LKK-1BSP Gas Stockpot Cooker equips venue operators and head chefs with a certified, high-MJ stock stove built to handle extreme pot weights, maximize thermal efficiency, and simplify kitchen sanitation.
Key advantages of the LKK-1BSP include:
High-Output 18-Jet Duckbill Burner (Up to 115 MJ/h): Delivers intense, even thermal heat output (115 MJ/h NG / 88 MJ/h LPG) to rapidly boil large stockpots and maintain temperature stability over all-day cooking cycles.
Extreme 300kg Trivet Capacity: Reinforced, heavy-duty cast-iron trivet securely supports large commercial stockpots up to 600 mm x 600 mm in size and up to 300 kg in total weight.
Ergonomic Hand-Turn or Knee-Push Controls: Smooth flat front control panel layout allows staff to adjust flame settings using either hand-turn or convenient knee-push operation during busy prep shifts.
Full AISI 304 Stainless Steel Frame & Body: Premium 304-grade stainless steel chassis and external bodywork offer maximum resistance to corrosion, rust, and physical impact damage.
Flame Failure Protection & Pilot Light Standard: Equipped standard with a standing pilot ignition and Flame Failure Device (FFD) to ensure full safety compliance across all Australian commercial kitchens.
Removable Waste Spillage Tray: Includes a slide-out stainless steel spillage tray beneath the burner ring to capture overflow, grease, and food debris for fast shift clean ups.
IAPMO GasMark Certified (GMK10268): Fully certified under IAPMO GasMark Approval #GMK10268 to satisfy all Australian state and territory commercial gas safety regulations.
| Feature | Specification Details |
| Brand & Range | LKK Commercial Heavy Duty Series |
| Model Code | LKK-1BSP |
| Product Type | Commercial Floor-Standing Single Gas Stockpot Cooker |
| Gas Approval Certification | IAPMO GasMark Certified (#GMK10268) |
| Natural Gas Consumption | 115 MJ/h Input (Natural Gas) |
| LPG Consumption | 88 MJ/h Input (Liquid Petroleum Gas) |
| Burner Configuration | High-Output 18-Jet Duckbill Burner |
| Pot Capacity & Weight Limit | Accommodates stockpots up to 600 mm x 600 mm | Supports max weight of 300 kg |
| Control System | Flat Front Panel for Hand-Turn or Knee-Push Valve Operation |
| Safety System | Flame Failure Device (FFD) & Standing Pilot Standard |
| Frame & Body Material | All Commercial AISI 304 Grade Stainless Steel Frame & Exterior Body |
| Trivet Type | Extra Heavy-Duty Cast-Iron Trivet |
| Waste System | Removable Stainless Steel Slide-Out Spillage Tray |
| Levelling & Legs | Height-Adjustable Stainless Steel Feet |
| Gas Supply Inlet | 3/4" BSP Male (GI) |
| External Dimensions (WxDxH) | 600 mm W x 730 mm D x 520 mm H |
Gas Installation & Commissioning Notice: Under Australian law, all commercial gas equipment must be installed and commissioned by a licensed gas fitter in accordance with AS/NZS 5601 standards. Proof of licensed gas commissioning is required to validate manufacturer warranty coverage.
Delivery & Freight Notice: Commercial heavy cooking equipment requires dedicated freight handling. Please contact our friendly sales team for a custom freight quote if delivery is required for a residential or non-commercial address.
Setup & Commissioning: Ensure an authorized gas plumber connects the 3/4" BSP gas line (NG or LPG), verifies gas operating pressure, and completes official commissioning. Adjust the levelling feet to ensure absolute stability on the kitchen floor.
Ignition & Operation: Light the standing pilot flame following safety guidelines. Push and turn the gas valve handle (using hand or knee operation) to ignite the 18-jet duckbill burner. Adjust flame height to toggle between rapid boiling and slow stock simmering.
Daily Hygiene & Servicing: Turn off the gas supply and allow the unit to cool completely. Lift off the cast-iron trivet for cleaning in warm, soapy water. Slide out the bottom spillage tray to empty debris and wipe down 304 stainless steel exterior panels with a mild commercial degreaser.
The LKK-1BSP is designed with a wide, reinforced top footprint capable of accommodating stockpots up to 600 mm x 600 mm in size, with a maximum static load weight rating of 300 kg.
Yes. The unit produces 115 MJ/h heat output on Natural Gas and 88 MJ/h heat output on LPG. Please specify your venue's gas supply connection type when placing your order.
The flat front control panel is engineered with smooth-action valves positioned at knee height. This allows busy chefs carrying heavy, filled stockpots to adjust or shut off the gas flame using knee pressure without needing to free their hands.
The stockpot cooker comes standard with a Flame Failure Device (FFD) and a standing pilot light, automatically shutting off the gas supply if the flame goes out.
The LKK-1BSP holds official IAPMO GasMark Certification (#GMK10268), confirming full compliance with all Australian commercial gas safety and manufacturing standards.
*Images are for illustrative purposes only. Specifications are subject to change without notice.