Tecnodom CN90E 90° External Curved Glass Deli Display Showcase 0°C–2°C | 10A

[GLOBAL_MSG_2] 

The Tecnodom CN90E Commercial 90° External Corner Curved Glass Refrigerated Deli Display Showcase is an Italian-engineered modular refrigeration solution designed specifically for Australian commercial delicatessens, butcher shops, gourmet charcuteries, artisan cheese mongers, and supermarket fresh food counters. Measuring 1440 mm Wide x 1440 mm Deep x 1260 mm High with an expansive 958mm internal display depth, this 90-degree external curved glass corner showcase enables shopfitters and venue owners to route continuous, unbroken refrigerated display lines around corner shopfronts and perimeter walls without losing valuable display deck space.

Engineered to maintain strict preservation holding temperatures between 0°C and +2°C, the CN90E is purpose-built for temperature-sensitive gourmet foods such as fresh cuts, cured meats, dairy lines, fresh pasta, and seafood salads. Built with heavy-duty 50mm-thick foamed thermoplastic side walls, an upper panoramic lift-up curved tempered safety glass canopy with chrome-plated rear support posts, internal display lighting, and an integrated frontal gasket anti-fog heater, this showcase combines European merchandising aesthetics with low-power 10A plug-in operation.

Why Australian delis, butcheries, and gourmet markets choose the Tecnodom CN90E:

• Engineered 90° external corner layout: Connects adjoining straight display counters to form continuous, panoramic L-shaped or U-shaped refrigerated counter runs, eliminating dead shopfront zones and maximising floor efficiency.

• Precise 0°C to +2°C cold holding: Engineered specifically for highly perishable goods, holding steady temperatures in the critical 0°C to +2°C band to maintain meat colour, slow microbial growth, and satisfy Australian Food Safety Standards.

• Panorama lift-up curved tempered glass: Sturdy front curved glass lifts upward on smooth pivot mechanisms, providing effortless hands-free access for front-of-house staff during morning product dress-outs and end-of-day sanitisation.

• Anti-condensation & anti-fog heating elements: Built with specialised anti-water condensation glass technology and a front-edge gasket anti-fog heater, keeping the panoramic viewing deck crystal-clear during humid summer trade.

• Substantial 958mm internal display depth: Features an extra-wide stainless steel display bed that provides ample room for deep product displays, stepped platters, and Gastronorm pan inserts.

• Integrated stainless steel rear prep counter: Equipped with an ergonomic, full-width commercial stainless steel rear working bench for wrapping, slicing, weighing, and plating directly at the service pass.

• 50mm foamed thermoplastic side walls: High-density 50mm injected insulation provides high thermal retention, structural rigidity, and reduced compressor cycle times, lowering daily utility bills.

• Brilliant interior illumination: Integrated display lighting highlights natural meat marbling, vibrant antipasto colours, and artisan cheese textures to stimulate impulse retail purchasing.

• True plug-and-play 10A operation: Consuming just 492W on a standard Australian 240V single-phase 10-Amp plug, this showcase plugs directly into an ordinary commercial wall outlet without costly rewiring.

• 1-Year commercial warranty: Protected by an Australian 1-Year commercial parts and labour warranty for reliable peace of mind.

Technical Specifications

Daily Care, Maintenance & End-of-Shift Sanitisation

To preserve clear glass visibility, protect the stainless steel display deck, and uphold strict commercial food safety compliance:

1. Curved Glass Care & Cleaning: Clean the inner and outer curved glass panels daily using a soft microfibre cloth and a neutral, non-ammonia commercial glass cleaner. Never use abrasive scouring pads or scouring powders, as they scratch tempered glass and damage the anti-fog surface elements.

2. Stainless Steel Display Deck Washdown: At the close of trade, lift the curved front glass panel and clear all food trays from the deck. Wash the stainless steel display surface with warm water and a neutral food-safe sanitiser. Avoid chlorine bleach or harsh acid-based cleaners that can pit and corrode stainless steel.

3. Rear Stainless Steel Work Shelf Sanitisation: Sanitise the rear operator preparation bench after every shift with a commercial food-grade surface sanitiser, wiping in the direction of the metal grain.

4. Condenser Air Intake Cleaning: Ensure the lower compressor compartment remains unobstructed. Use a soft-bristle brush or vacuum cleaner monthly to clear accumulated dust and lint from the condenser coil to ensure proper heat rejection and maintain stable 0°C to 2°C temperatures.

5. Drainage & Gasket Inspection: Wipe the front and rear rubber sealing gaskets with a damp, soft cloth to remove residual brine, oils, and food particles. Ensure the internal condensation drain remains clear of loose food scraps.

Commercial Installation & Placement Guidelines

1. Standard 10A Electrical Connection: The Tecnodom CN90E operates on a standard Australian 240V single-phase 10A power supply. Plug the unit directly into a dedicated wall outlet on a surge-protected circuit; avoid domestic multi-plug adaptors or light-duty extension leads.

2. Modular Counter Alignment: When integrating the CN90E with adjacent straight Tecnodom deli counters, ensure adjoining units are accurately levelled and locked in place using manufacturer-approved alignment brackets before sealing intermediate joints with food-grade silicone.

3. Airflow Clearances: The self-contained refrigeration system requires free airflow across the lower engine compartment. Maintain a minimum perimeter clearance of 100mm from solid rear walls and cabinetry to ensure efficient ventilation.

4. Thermal Heat Isolation: Never install the showcase in direct outdoor sunlight, beneath direct HVAC heating diffusers, or adjacent to high-heat commercial cooking appliances (such as fryers, rotisseries, or open cooktops). Radiant external heat can overwhelm the 0°C to +2°C cooling envelope.

5. Level Surface Calibration: Adjust the integrated commercial levelling feet to ensure the unit sits completely level in both horizontal planes, facilitating smooth glass lifting and correct internal condensate drainage.

Freight, Delivery & Commercial Site Access Notice

Standard commercial road freight delivery is available Australia-wide to registered business premises equipped with ground-floor street access or dedicated loading dock/forklift facilities.

Please note: Because this corner unit has an expansive 1440mm x 1440mm footprint and ships secured on a heavy-duty pallet, deliveries to residential premises, domestic addresses, or regional sites requiring a hydraulic tail-lift truck require a specialised delivery quote. Prior to dispatch, please confirm that your entry doorways, hallways, and counter gaps accommodate a minimum width clearance of 1300 mm (or verify access dimensions for unboxed transit). Please contact our friendly commercial sales team prior to ordering to coordinate site access or enquire about matching modular straight counters.

Frequently Asked Questions

Can the Tecnodom CN90E be used as a standalone display unit?

While the CN90E is primarily engineered to connect straight deli counters into a seamless 90° corner run, it features finished 50mm thermoplastic side walls that allow it to operate as an independent corner island showcase in smaller boutique food venues.

How does the anti-fog heating system work?

The unit incorporates heated elements along the frontal gasket perimeter paired with anti-condensation glass. This system gently warms the glass edges just enough to prevent warm, humid external kitchen air from fogging the cold glass, ensuring uninterrupted product presentation during peak trade.

Is this unit cold enough to store fresh, raw meats?

Yes. With an engineered temperature range of 0°C to +2°C, the CN90E provides the exact low-temperature storage required for fresh butchers' cuts, raw poultry, gourmet sausages, and fresh seafood preparations in compliance with Australian Food Safety Standard 3.2.2.

How does the front glass panel open for cleaning?

The unit features an upper structure with panoramic curved tempered safety glass that pivots smoothly upward on balanced hinges. This allows staff to reach deep inside the 958mm deck to arrange platters and wipe down interior corners without straining.

Does this refrigerated showcase require dedicated 15A or 3-phase wiring?

No. Operating at an energy-efficient 492W, the Tecnodom CN90E comes factory-fitted with a standard Australian 240V 10-Amp plug, making it fully operational on standard commercial power outlets.

N.B Image is for illustrative purposes only. Specifications are subject to change without notice.