Polar GE632-A Direct Draw Keg Beer Dispenser 50L | G-Series 10A

The Polar G-Series Direct Draw Commercial Keg Beer Dispenser (GE632-A) is a self-contained, mobile draught beverage solution engineered specifically for Australian pubs, bars, cafes, restaurants, pop-up events, function centres, and catering operations. Sized at 612 mm Wide x 760 mm Deep x 1312 mm High and weighing 63 kg, this heavy-duty commercial kegerator holds a standard 50-litre half-barrel beer keg within a 164-litre chilled cavity. Powered by an efficient forced-air refrigeration system operating between 2°C and 8°C, the GE632-A enables venues to pour cold draught beer, craft cider, kombucha, or pre-mixed cocktails directly on tap without investing in a costly glycol line or dedicated cold room cellar.

Why operators choose the Polar GE632-A:

• Standard 50L half-barrel capacity — internal 164-litre storage holds a full commercial 50L draught keg or multiple smaller Cornelius and craft kegs, making it suitable for both front-of-house bars and event catering.

• Rapid forced-air circulation cooling — constantly circulates chilled air around the keg cavity to maintain uniform 2°C to 8°C serving temperatures and prevent warm, foamy initial pours.

• Turnkey draught hardware kit included — ships complete with a polished single-tap dispense tower, top-mounted drip tray, CO2 gas line, tee joint, and a standard commercial Type A slide-on keg coupler.

• Intuitive digital temperature display — front-facing electronic thermostat and clear LED readout allow quick temperature verification and precise set-point regulation.

• Robust commercial stainless steel fabrication — heavy-gauge stainless steel worktop and exterior resist spills, knocks, and continuous bar service wear while wiping clean in seconds.

• Eco-friendly R600a hydrocarbon refrigerant — natural R600a refrigerant with an ultra-low Global Warming Potential (GWP 3) delivers thermodynamic efficiency with reduced environmental impact.

• Energy-saving self-closing door — solid insulated door with 42mm high-density thermal foam and self-closing hinges minimises thermal loss and lowers power consumption.

• Smooth bar mobility & positioning — pre-fitted with heavy-duty commercial castors (with front-locking brakes) for effortless transport between event spaces and easy access for floor sanitisation.

• Standard 10A plug-and-play installation — runs on standard Australian single-phase 230V power with a factory-fitted 10 Amp wall plug, requiring no 3-phase wiring or specialised electrical circuits.

Technical Specifications

Operating & Service Notice

This commercial kegerator is engineered to maintain pre-chilled kegs between 2°C and 8°C; ensure kegs are placed inside already cold to prevent initial foaming and prolonged pull-down times. While a single-tap tower, draft lines, and a Type A keg coupler are included, the CO2 gas bottle and secondary gas pressure regulator are not included and must be sourced separately. Ensure all gas fittings and line pressures are commissioned by a qualified draught beer technician. To maintain optimal refrigeration efficiency and protect compressor warranty coverage, brush clean the condenser coil monthly and maintain at least 100mm clearance around the ventilation louvres.

Freight & Delivery Notice

Standard commercial freight delivery is available across Australia. Due to the 63kg commercial shipping weight, assembled height, and precision refrigeration components, please contact our friendly commercial sales team for a custom freight quote if delivery is required for a residential or non-commercial address.

Frequently Asked Questions

What types of kegs fit inside the Polar GE632-A?

The internal 164-litre cabinet is sized to fit one standard commercial 50-litre half-barrel keg (widely used by Australian commercial and craft breweries). It can alternatively accommodate smaller 20-litre or 30-litre DIN kegs, as well as multiple 19L homebrew or Cornelius (Corny) kegs for craft venues and mobile beverage caterers.

What draught accessories are included with the unit?

The GE632-A arrives with a complete starter dispensing kit:

1. Single-faucet polished draught beer dispense font/tower.

2. Top-mounted stainless steel drip tray.

3. Food-grade beer line and CO2 gas tubing with tee joint.

4. Type A slide-on commercial keg coupler (standard for popular Australian breweries such as Lion Nathan and Coopers).(Note: A CO2 gas cylinder and dual-gauge gas regulator must be supplied separately).

Can the Polar GE632-A pour beverages other than beer?

Yes. The direct-draw system can dispense any carbonated beverage supplied in compatible kegs, including hard ciders, sparkling water, carbonated craft sodas, iced tea, kombucha, and pre-mixed tap cocktails (such as espresso martinis or Aperol spritzes), provided appropriate food-grade gas blends and pressure settings are maintained.

What is the advantage of forced-air cooling over cold-plate systems?

Forced-air cooling uses an internal fan to circulate chilled air continuously throughout the entire cabinet and up into the base of the font tower. This eliminates cold spots around the keg and keeps the draught line chilled right up to the tap shank, preventing fobbing (excess foam) on the first pour after an idle period.

What electrical outlet is required?

The Polar GE632-A operates on standard Australian single-phase 230V mains power and comes factory-fitted with a standard 10 Amp plug, enabling direct plug-and-play installation into any ordinary commercial wall outlet without requiring three-phase or 15A electrical alterations.

N.B Images are for illustrative purposes only. Specifications are subject to change without notice.