FED-X XUB7F18S3V 3-Door Underbench Freezer 1795mm | 417L Stainless

[GLOBAL_MSG]

The FED-X 1795 mm Commercial Stainless Steel Three Door Under bench Freezer (XUB7F18S3V) is a heavy-duty, tropicalised sub-zero storage and food preparation worktop engineered specifically for Australian restaurants, cafes, fast-food outlets, butcheries, commercial bakeries, and busy catering facilities. Measuring 1795 mm Wide x 700 mm Deep x 850 mm High with a 417-litre gross capacity (311L net usable storage), this solid 3-door refrigerated bench pairs a durable stainless steel food prep deck with a sub-zero holding environment between -18°C and -22°C. Powered by fan-forced airflow cooling, European Embraco/Secop compressors, and German EBM-Pabst fans, the XUB7F18S3V eliminates internal warm spots and guarantees rapid temperature recovery in demanding Australian ambient environments up to 38°C.

Why operators choose the FED-X XUB7F18S3V:

• Tropicalised for harsh Australian climates — engineered to maintain consistent -18°C to -22°C sub-zero storage in ambient room conditions up to 38°C and 60% relative humidity, protecting frozen inventory during hot kitchen shifts.

• Dual-purpose prep counter & deep freeze — solid 1795mm food-grade stainless steel top serves as a sturdy preparation worktop, while the under bench cabinet keeps frozen proteins, seafood, and prepped items within arm's reach of the line.

• Full Gastronorm GN 1/1 compatibility — internal cavity accommodates standard GN 1/1 pans directly, supplied with 1 heavy-duty adjustable wire shelf per door (rated to support 40 kg per shelf) with optional pan slides available.

• Premium European refrigeration hardware — driven by a high-efficiency Embraco or Secop compressor, German-engineered EBM-Pabst evaporator and condenser fans, and an Italian Dixell digital electronic thermostat.

• Fan-forced dynamic circulation — fan-forced cooling circulates freezing air uniformly around all shelves, eliminating warm spots and speeding up temperature recovery after repeated door openings.

• Self-closing doors with magnetic seals — three heavy-duty hinged stainless steel doors feature self-closing mechanisms and thick magnetic gaskets to lock in cold air and prevent accidental energy loss.

• Eco-friendly R290 hydrocarbon refrigerant — utilises natural R290 refrigerant with zero ODP and low GWP to deliver thermodynamic efficiency while reducing environmental impact.

• Thick 60mm eco-insulation — 60mm high-density cyclopentane insulation (CFC and HCFC-free) minimises thermal transfer, cutting compressor run time and lowering power bills.

• Hygienic easy-clean stainless steel interior — food-grade stainless steel internal and external casing with coved internal corners eliminates dirt traps for rapid end-of-shift sanitisation.

• Pre-installed mobility castors — heavy-duty swivel castor wheels (with front-wheel locking brakes) make positioning, floor levelling, and roll-away cleaning effortless.

• Extended 2 + 2 Year Warranty protection — backed by a 2-year commercial parts and labour warranty, plus an additional 2 years of parts-only coverage upon registration within 14 days of invoice.

Technical Specifications

Custom Configurations & Factory Options (Enquire for Quote)

• Integrated Splashback Worktop: Factory-fitted rear stainless steel splashback top to protect kitchen walls from liquid splashes and food debris.

• Drawer Bank Conversions: Modular 2-drawer or 3-drawer stainless steel refrigerated drawer modules in lieu of standard hinged doors for organised GN pan access.

• Additional GN Pan Slides: Extra internal tray slides for sliding standard GN 1/1 pans directly onto runners without wire shelves.

Operating & Service Notice

This commercial bench freezer is an active holding appliance engineered to store pre-frozen food items strictly between -18°C and -22°C; all product inventory must be fully frozen before loading into the cabinet. To ensure balanced cold airflow, do not place cartons or containers flush against internal evaporator discharge louvres or exceed the 40 kg weight capacity per shelf level. The unit is designed with rear ventilation allowances enabling placement against walls; however, ensure side and bottom louvres remain clean and unobstructed. To preserve energy efficiency and uphold warranty terms, inspect and clean the condenser coil at least every 30 to 60 days.

Freight & Delivery Notice

Standard commercial freight delivery is available across Australia. Due to the 1795mm bench width and 146kg commercial shipping weight, please contact our friendly commercial sales team for a custom freight quote if delivery is required for a residential or non-commercial address.

Frequently Asked Questions

What type of cooling system does the FED-X XUB7F18S3V use?

The freezer utilises a commercial fan-forced evaporator cooling system powered by German EBM-Pabst fans and an Embraco or Secop compressor. This continuously circulates chilled air throughout all three door sections, eliminating warm air pockets and maintaining a consistent holding temperature between -18°C and -22°C even during frequent kitchen door openings.

Can standard Gastronorm pans fit inside this underbench freezer?

Yes. The internal cavity is fully GN 1/1 compatible. The unit comes supplied with three plastic-coated wire shelves (one per door section) rated to support 40 kg each. Alternatively, you can install optional pan slides to slide GN 1/1 stainless steel food pans directly into the runners.

Can I customise the doors with drawers or a splashback?

Yes. The FED-X workbench series can be customised upon request. You can configure the bench with an integrated rear stainless steel splashback to protect wall tiles, or swap out any of the solid hinged doors for 2-drawer or 3-drawer modules to streamline ingredient access on busy cooklines.

How energy efficient is this 3-door bench freezer?

The unit consumes 9.072 kWh/24h, operating on natural R290 refrigerant with 60mm high-density cyclopentane insulation foam (CFC and HCFC-free). This combination minimises thermal leakage, shortens compressor cycle times, and reduces power consumption under demanding commercial kitchen loads.

What electrical outlet is required?

The FED-X XUB7F18S3V runs on standard Australian 240V single-phase power, drawing 560 Watts (3.4 Amps). It comes factory-fitted with a standard Australian 10 Amp plug, enabling direct plug-and-play installation into any standard commercial benchtop or wall outlet.

N.B Images are for illustrative purposes only. Specifications are subject to change without notice.