FED-X
FED-X XUB7C13S2V 2-Door Stainless Steel Commercial Underbench Storage Fridge (282L)
[GLOBAL_MSG]
Optimise food prep workflows and keep prepped ingredients immediately within reach on the cookline with the FED-X XUB7C13S2D 282 Litre 4-Drawer Stainless Steel Under Counter Workbench Refrigerator. Purpose-built for high-speed restaurant prep lines, cafes, pubs, and commercial catering kitchens, this 1360 mm wide underbench chiller pairs a solid stainless steel worktop with four heavy-duty Gastronorm (GN) 1/2 pan-compatible drawers—eliminating awkward bending and rummaging inside deep cabinets during busy service.
Constructed with a full stainless steel interior and exterior featuring rounded internal corners and thick 60 mm HFC- and CFC-free insulation, the XUB7C13S2D incorporates premium European refrigeration components—including an Embraco/Secop compressor, Dixell digital controller, and ebm-papst evaporator and condenser fans. Tropicalised for demanding Australian kitchen environments, it maintains precise holding temperatures between -2°C and +8°C even in ambient heat up to +43°C, while its wall-flush ventilation design saves valuable kitchen floor space.
4 Heavy-Duty GN 1/2 Pan-Compatible Drawers: Multi-drawer configuration accommodates standard GN 1/2 pans directly inside smooth-gliding commercial runners—keeping portioned proteins, sauces, and prepped ingredients organised and accessible at waist height.
Tropicalised +43°C Ambient Rating (-2°C to +8°C): Dynamic fan-forced cooling system engineered for hot Australian commercial kitchens (up to +43°C ambient at 60% relative humidity) ensures rapid temperature recovery across every drawer.
Premium European Refrigeration Components: Powered by a high-efficiency Embraco/Secop compressor using eco-friendly R290 refrigerant, ebm-papst fan motors, and an accurate Dixell electronic controller.
Full Stainless Steel Construction with Rounded Internal Corners: Heavy-duty stainless steel worktop, cabinet, and drawer fronts feature coved/rounded interior corners to eliminate dirt traps for fast, hygienic daily sanitation.
Space-Saving Wall-Flush Installation: Intelligent front-breathing / rear-ventilation airflow architecture allows the unit to sit flush against kitchen walls without obstructing essential condenser airflow.
Energy-Efficient 60 mm Insulation & Low 215W Power Draw: High-density 60 mm HFC- and CFC-free foam insulation maximises thermal retention while drawing just 215W (1.3A) on a standard 10 Amp plug.
Lockable Heavy-Duty Castors: Pre-installed industrial swivel castors with front wheel brakes lock securely during prep service and roll smoothly for deep cleaning behind and underneath the cabinet.
2 Years Parts & Labour + 2 Years Parts-Only Warranty: Backed by a 2-year parts and labour warranty, extendable with an additional 2 years parts-only protection when registered online within 14 days of invoice.
| Specification | Details |
| Brand | FED-X |
| Model / SKU | XUB7C13S2D |
| Product Type | Commercial 4-Drawer Stainless Steel Underbench Workbench Fridge |
| Gross Volume | 282 Litres |
| Drawer Configuration | 4 × Heavy-Duty Drawers (fits standard GN 1/2 Gastronorm pans) |
| Temperature Set Range | -2°C to +8°C |
| Ambient Operating Rating | Tropicalised – Approved for +43°C Ambient (60% Relative Humidity) |
| Cooling System | Dynamic fan-forced cooling |
| Compressor / Controller / Fans | Embraco/Secop Compressor | Dixell Digital Controls | ebm-papst Evaporator & Condenser Fans |
| Refrigerant & Insulation | Eco-friendly R290 | 60 mm HFC & CFC-free foam insulation |
| Construction & Mobility | Full Stainless Steel interior & exterior with rounded internal corners; lockable heavy-duty castors; wall-flush installation design |
| External Dimensions (W × D × H) | 1360 mm W × 700 mm D × 850 mm H |
| Internal Dimensions (W × D × H) | 799 mm W × 580 mm D × 564 mm H |
| Power Supply & Output | 240V / 50Hz / 215W / 1.3A (Standard 10 Amp plug) |
| Warranty | 2 Years Parts & Labour + 2 Years Parts Only (upon online registration within 14 days of invoice) |
Clean Drawers, Runners & Magnetic Gaskets Daily: Switch off the unit before deep cleaning. Slide out the GN 1/2 pans, wipe down the stainless steel drawer interiors, telescopic runners, rounded internal corners, and magnetic drawer gaskets daily with a soft microfibre cloth and food-safe sanitiser to ensure an airtight seal and smooth drawer action.
Sanitise the Stainless Steel Worktop & Exterior: Clean the 1360 mm stainless steel benchtop and drawer fronts at the end of every shift with warm soapy water or food-safe stainless steel cleaner, wiping in the direction of the grain. Avoid abrasive scourers or chlorine-based bleaches.
Vacuum Condenser Coils & Air Grilles Monthly: Unlock the front castor brakes, roll the cabinet forward, and brush or vacuum dust, flour, and grease build-up from the condenser grille and coils every month so the Embraco/Secop compressor and ebm-papst fans maintain peak efficiency in +43°C ambient kitchens.
Standard commercial road freight delivery is available Australia-wide to commercial business addresses with level ground access or loading docks. Due to the 1360 mm width, 700 mm depth, 850 mm height, and heavy-duty upright commercial crating of this four-drawer stainless steel underbench fridge, delivery via a hydraulic tail-lift truck or to a commercial loading dock with forklift or pallet handling equipment is standard. (Please keep the unit upright during transit and allow it to stand before powering on.) For deliveries to residential, home-based business, or non-commercial addresses, please contact our friendly commercial sales team prior to placing your order to obtain a customised courier quote and confirm delivery logistics.
What Gastronorm pans fit inside the FED-X XUB7C13S2D 4-Drawer Fridge? All four heavy-duty stainless steel drawers are purpose-sized to accommodate standard GN 1/2 Gastronorm pans directly, allowing chefs to drop prepped pan inserts straight into the drawers for fast, organised station replenishment.
Can the FED-X XUB7C13S2D be pushed flush against a kitchen wall? Yes. Its engineered airflow and ventilation pathway allows wall-flush installation directly against commercial kitchen walls without starving the condenser of airflow, maximising floor space in tight prep lines.
How do I activate the 4-year extended warranty on the FED-X XUB7C13S2D? The fridge includes a standard 2-year parts and labour warranty. Simply register your unit online within 14 days of the invoice date to receive an additional 2 years of parts-only warranty coverage.
N.B Image is for illustrative purposes only. Specifications are subject to change without notice.
Customer Reviews