Bolero U419 Aluminium Stacking Chairs Pack of 4 | 735mm Commercial Outdoor

The Bolero U419 Commercial 735mm Aluminium Stacking Armchairs (Pack of 4) deliver a classic, industrial bistro seating solution engineered specifically for high-turnover Australian pavement cafes, pub beer gardens, restaurant terraces, hotel courtyards, and takeaway dining patios. Measuring 735 mm High x 530 mm Wide x 580 mm Deep per chair, this heavy-duty 4-pack is constructed entirely from commercial-grade tubular aluminium (25 mm diameter x 1.8 mm wall thickness) across the frame, slatted seat, and contoured backrest. Built to withstand Australia's sun, coastal humidity, and downpours without rusting, chipping, or corroding, each chair supports an impressive 160 kg safe commercial payload while remaining effortlessly stackable up to 12 chairs high for fast, compact end-of-shift storage. Fitted with protective, non-marking foot plugs that prevent floor gouging on polished concrete, timber, and tiled indoor surfaces, the Bolero U419 provides ultra-low-maintenance, weather-proof durability across both exposed alfresco footpaths and interior dining rooms.

Why Australian hospitality venues and cafe operators choose the Bolero U419 (Pack of 4):

• 100% all-aluminium, corrosion-proof construction — slatted seat, contoured back, and structural frame are built from heavy-duty aluminium that will never rust, rot, or pit, making it the ideal seating investment for beachside kiosks, coastal bars, and wet alfresco settings.

• Commercial 160 kg payload rating — reinforced 25 mm tubular aluminium framing (1.8 mm wall thickness) delivers rigid structural stability under continuous high-volume commercial dining service, supporting up to 160 kg per chair.

• Space-saving 12-tier stacking capacity — vertical nesting geometry allows up to 12 chairs to be stacked neatly together, clearing floor area for nightly mopping and providing compact, secure indoor storage after trading hours.

• Ultra-lightweight portability — lightweight all-aluminium profile allows waitstaff to carry, reposition, and pack down multiple chairs simultaneously with minimal physical fatigue.

• Integrated non-marking protective foot plugs — fitted with heavy-duty rubberised foot plugs that prevent scuffing, scratching, and floor damage across commercial timber, polished screed, sealed tiles, and vinyl while dampening noise and preventing wobble.

• Virtually zero-maintenance design — smooth metal surface and slatted drainage design allow rain to run off freely, requiring only a fast wipe with a damp sanitising cloth between table turnovers without the need for timber oils or fabric treatments.

• Classic industrial bistro aesthetic — bright, metallic industrial aesthetic complements modern urban cafes, rustic pub gardens, and European-inspired footpath dining strips.

• Cost-effective 4-pack commercial bundle — supplied in an economical carton of 4 fully assembled chairs, simplifying bulk dining room fit-outs and seasonal patio expansions.

Technical Specifications

Operating, Care & End-of-Shift Maintenance

To preserve the bright finish, structural integrity, and hygienic standards of the Bolero U419:

1. Daily Wipe-Down & Cleaning: At the close of each shift, wipe down the aluminium frame, armrests, and slatted seat using a soft microfibre cloth dampened with warm water and a neutral, mild commercial detergent. This easily removes dried food spills, sticky soft drinks, coffee rings, and airborne grime.

2. Coastal & Marine Salt Washdown: In seaside locations, airborne sea-salt mist can accumulate on metal surfaces over time. Periodically rinse the chairs with clean, fresh tap water and dry with a cloth to prevent salt residue build up and preserve the bright metallic surface.

3. Cleaning Precautions: Avoid abrasive wire brushes, steel scouring pads, or harsh caustic chemical cleaners containing chlorine or heavy acids, as these can scratch the aluminium or dull its finish.

4. Stacking & Overnight Storage: When stacking up to 12 chairs high, lower each chair gently down onto the frame below to avoid scraping the aluminium tubing. Store stacked towers under cover or inside the venue overnight to keep them clean for morning trade.

5. Foot Plug Inspection: Inspect the bottom rubberised foot bungs monthly. Ensure bungs are seated tightly and free of embedded gravel or grit that could mark indoor flooring. Replace any worn foot plugs promptly to maintain floor protection.

Alfresco Placement & Compliance Notice

The Bolero U419 is engineered specifically for Australian commercial hospitality venues:

1. Weather & UV Exposure: Unlike plastic resin chairs that can become brittle under UV radiation or timber that requires regular oiling, all-aluminium chairs are impervious to sun bleaching, rot, and rain. The slatted seat prevents water pooling after heavy downpours, allowing the chairs to dry rapidly for dining service.

2. Floor Compatibility: The integrated non-marking foot bungs are safe for commercial linoleum, polished concrete, hardwood floors, stone paving, and exposed aggregate without leaving dark scuff marks.

3. Footpath & Council Dining Permits: The lightweight construction and compact 12-tier vertical stacking geometry comply with local council requirements across Australian capital cities and regional municipalities for rapid pack-down and designated pedestrian clear zones.

Freight, Packaging & Delivery Notice

Due to their stackable nesting design, multiple cartons of Bolero U419 chairs can be freighted together on pallets to secure the most economical transport rates. Standard commercial road freight is available Australia-wide to commercial business addresses with level ground access or loading docks. For bulk multi-pack venue orders or deliveries to residential or non-commercial addresses, please contact our friendly commercial sales team prior to ordering so we can confirm the best consolidated freight rate and verify site access.

Frequently Asked Questions

Will these all-aluminium chairs rust if left outdoors in the rain?

No. Aluminium is a non-ferrous metal that does not contain iron, meaning it cannot rust like mild steel or cast iron. When exposed to oxygen and moisture, aluminium naturally forms a microscopic protective oxide layer that resists corrosion. This makes the Bolero U419 ideal for open-air dining areas, beer gardens, and coastal venues exposed to rain and humidity.

How do the slatted seats perform during wet weather?

The seat and backrest are engineered with horizontal slatted aluminium profiles. Rainwater drains straight through the gaps rather than pooling on the seat. After wet weather, staff can prepare the chairs for immediate service with a single swipe of a dry microfibre cloth.

Do these chairs require assembly upon arrival?

No. Bolero U419 chairs are supplied fully assembled with welded tubular aluminium framing. They can be unpacked and placed straight onto your dining floor or terrace immediately upon delivery.

Can the chairs be used safely on indoor timber and polished concrete floors?

Yes. Each leg is capped with an integrated, durable non-marking rubberised foot plug. These protect delicate indoor surfaces such as polished hardwood, natural stone, ceramic tiles, and sealed concrete against scratches, scuff marks, and metal gouging.

What is the maximum safe stacking height?

The Bolero U419 is safely stackable up to 12 chairs high. Stacking vertically saves substantial storage footprint, making the pack-down process fast and efficient for venues with limited storage space or those required to clear footpath dining areas nightly.

N.B Images are for illustrative purposes only. No tables or accessories come with the chairs. Specifications are subject to change without notice.