Blizzard Ice Maker Air-Cooled - SN-700P

**WINTER Sale valid until 30th July + [GLOBAL_MSG_2]**

Key Features: 

• Output/24h: Up to 310kg
• Storage Capacity: Approx. 170kg (Bin Control Setting Approx. 170kg)
• U.S. Morrill Water Pump
• German ËBM-Pabst fan
• Italian Aspera Compressor
• Hisakage PCL
• 22mm³ ice-cube
• Denmark Danfoss Expansion Valve & Dry Filter
• Japanese Saginomiya Solenoid & Hydraulic valve
• Watermark-certified product sticker

Dimensions: 760 mm W x 860 D x 1745 H

Doors: 1

Door Type: Hinged

Body: Stainless Steel

Power: 240V; 1680W/10A

Net Weight (Kg): 105

Warranty: 2 Years Parts and Labour

Please note you will need to contact our friendly sales team for a quote to deliver to a residential address.

All Ice machines MUST be maintained to ensure high performance.
The cartridge on the water filter system needs to be replaced every 6 months and the unit must be de-scaled to clean the refrigeration evaporator plate.
This maintains the quality of the ice shape and thickness. 

 

• Remove scale and mineral deposits from evaporator plate and water distribution system using approved descaler.

 

• Sanitise water reservoir, distribution tubes, and bin interior.

 

• Clean and flush condenser coils (air-cooled units).

 

• Inspect condenser fan motor and blades.

 

• Check inlet water valve, float, and filters for correct operation.

 

• Verify ice thickness probe or sensor calibration.

 

• Inspect refrigerant pressures, superheat, and subcooling - adjust if necessary.

 

• Test compressor amperage and general performance.

 

• Inspect water pump operation and clean pump housing.

 

• Check harvest cycle operation (heater or hot gas valve).

 

• Inspect electrical connections, relays, and contactors.

 

• Replace inline water filter cartridge.

N.B Images are for illustrative purposes only. Specifications are subject to change without notice.