This self-extracting integral hood with motor and carbon filter suits the AT101EW Combi Oven.
Its for installation above the oven, with a built in exhaust fan motor and activated carbon filtration.
Functional features:
- The hood must be installed resting on the oven.
- The hood CANNOT be installed on stacked ovens.
- The smoker accessory CANNOT be used with the hood installed.
- System with inertial centrifugal action with high fat-retention filter elements, which lifts and eliminates all fat particles and steam.
Constructional features:
- Constructed throughout in AISI 304 stainless steel, thickness 10/10, with joints created by argon welding with continuous bead, followed by grinding and perfect satin finishing (no rivets or metal fasteners used).
- Fat collection duct around hood perimeter with external drain valve.
- Filtration by means of extruded rods of peat-based activated carbon to deodorise the extracted air after fat and steam separation, before the air is returned to the kitchen environment.
- Dual intake centrifugal fan with external motor. The bearings used ensure a lifespan of 20,000 hours, considering an average use at 80% of the maximum rated current with an air temperature not exceeding 40°C.
- Thermal protection, automatic reset and terminals available on wiring terminal block.
- Motor insulation class F.
- Certified protection rating IP55.
- Filter size 40x35 cm, 2 as standard.
- Extraction rate: 1,000 m³/h.
Technical Data:
Dimensions: 921 mm W x 1080 H x 650 D
Working voltage: 230V 1N~ / 50, 60Hz
Gross Weight: 90 Kg
Net Weight: 80 Kg
Electric Power: 0.42 kW
Warranty: 2 Years
N.B Image is for illustrative purposes only. Specifications are subject to change without notice.
