Zanussi
Zanussi
Zanussi 392353 EVO900 - Electric Induction Wok
About Zanussi 392353 EVO900 - Electric Induction Wok
Electric single induction wok - HP (5 kW)
Features:
- Diameter of pots to be used: minimum 12cm to maximum 28cm to obtain maximum heating efficiency
- Suitable for countertop installation
- Heavy duty glass-ceramic wok bowl
- Pan detection system - the inductor is switched on only when an induction-friendly wok pan is placed on the bowl
- 5kW inductor endowed with overheating safety device
- Reduced heat emission in the work environment
- IPX 5 water protection
- AISI 304 stainless steel worktop, 2mm thick
- All the functional components are accessible via the front of the appliance
- All exterior panels in stainless steel with Scotch Brite finishing
- Model has right-angled side edges to allow flush fitting joints between units, eliminating gaps and possible dirt traps
- Side and rear panel in AIS1304 stainless steel
- Induction compatible pots & pans must be used
Key Information:
Back Plates Dimensions: Ø 300
Induction Top Dimensions (width): 400mm
Induction Top Dimensions (depth): 900mm
External Dimensions: 400mm W x 900 D x 250 H
Net Weight: 30 kg
Electric:
Supply voltage: 380-400 V/3 ph/50/60 Hz
Total Watts: 5 kW
Predisposed for: 380-400V 3~ 50/60Hz 4.5-5kW
Please note: If the appliance is set up on or next to or against temperature sensitive furniture or similar, a safety gap of approximately 150mm should be maintained or some form of heat insulation fitted.
N.B Images are for illustrative purposes only. Specifications are subject to change without notice.
About Zanussi 392353 EVO900 - Electric Induction Wok
Electric single induction wok - HP (5 kW)
Features:
- Diameter of pots to be used: minimum 12cm to maximum 28cm to obtain maximum heating efficiency
- Suitable for countertop installation
- Heavy duty glass-ceramic wok bowl
- Pan detection system - the inductor is switched on only when an induction-friendly wok pan is placed on the bowl
- 5kW inductor endowed with overheating safety device
- Reduced heat emission in the work environment
- IPX 5 water protection
- AISI 304 stainless steel worktop, 2mm thick
- All the functional components are accessible via the front of the appliance
- All exterior panels in stainless steel with Scotch Brite finishing
- Model has right-angled side edges to allow flush fitting joints between units, eliminating gaps and possible dirt traps
- Side and rear panel in AIS1304 stainless steel
- Induction compatible pots & pans must be used
Key Information:
Back Plates Dimensions: Ø 300
Induction Top Dimensions (width): 400mm
Induction Top Dimensions (depth): 900mm
External Dimensions: 400mm W x 900 D x 250 H
Net Weight: 30 kg
Electric:
Supply voltage: 380-400 V/3 ph/50/60 Hz
Total Watts: 5 kW
Predisposed for: 380-400V 3~ 50/60Hz 4.5-5kW
Please note: If the appliance is set up on or next to or against temperature sensitive furniture or similar, a safety gap of approximately 150mm should be maintained or some form of heat insulation fitted.
N.B Images are for illustrative purposes only. Specifications are subject to change without notice.