4 Zone (5 kW each) electric induction cooking top.
Features:
• Glass ceramic cooking surface with 4 independently controlled induction zones with a power of 5 kW per zone
• Almost the entire surface of the ceramic plate can be used without “dead” spots
• One indicating lamp for each zone located on control console
• Induction plates endowed with overheating safety device
• Power to the individual zones can be set with progressive output i.e. fine regulation at the lower and larger progress at the upper levels
• Low heat dissipation to the kitchen
• The smooth, glass ceramic plate is not directly heated, so there is no burning on cooking surface
• IPX5 water protection
• Pots diameter to be used : min 12cm, max 28 cm in order to obtain maximum heating efficiency
• Suitable for countertop installation
Induction compatible pots & pans must be used.
Construction:
• All exterior panels in Stainless Steel with Scotch Brite finishing
• AISI 304 stainless steel worktop, 2mm thick
• Model has right-angled side edges to allow flush fitting joints between units, eliminating gaps and possible dirt traps
• Unit is 900mm deep to give a larger working surface area
Key Information:
Induction Top Dimensions (width): 800mm
Induction Top Dimensions (depth): 900mm
Shipping Dimensions: 540mm H x 1010 W x 860 D
Net weight: 65 kg
All exterior panels in Stainless Steel with Scotch Brite finishing.
Electric:
Supply voltage: 380/415 V/3 ph/50/60 Hz
Total Watts: 20 kW
Predisposed for: 380-415V 3-50/60Hz 20kW
Please note: If the appliance is set up on or next to or against temperature sensitive furniture or similar, a safety gap of approximately 150mm should be maintained or some form of heat insulation fitted.
N.B Images are for illustrative purposes only. Specifications are subject to change without notice.
