About Zanussi 372020 EVO700 - 2 Zone Electric Induction Cooktop
2-zone (3,5 kW each) electric induction cooking top
Features:
- Diameter of pots to be used: minimum 12cm to maximum 28cm to obtain maximum heating efficiency
- Suitable for countertop installation
- 6mm glass ceramic cooking surface with 2 independently controlled induction zones with a power of 3.5 kW per zone
- Almost the entire surface of the ceramic plate can be used without "dead" spots
- Indicating lamp for each zone located on control console
- Induction plates endowed with overheating safety device
- Power to the individual zones can be set with progressive output i.e. fine regulation at the lower and larger progress at the upper levels
- Low heat dissipation to the kitchen
- IPX 4 water protection
- The smooth, glass ceramic plate is not directly heated, so there is no burning on cooking surface
- One piece pressed 1.5mm work top in stainless steel
- Model has right-angled side edges to allow flush fitting joints between units, eliminating gaps and possible dirt traps
- Induction compatible pots & pans must be used.
Key Information:
Induction Top Dimensions (width): 400mm
Induction Top Dimensions (depth): 700mm
Shipping Dimensions: 530mm H x 460 W x 820 D
Net weight: 30 kg
All exterior panels in Stainless Steel with Scotch Brite finishing.
Electric:
Supply voltage: 380/415 V/3 ph/50/60 Hz
Total Watts: 7 kW
Please note: If the appliance is set up on or next to or against temperature sensitive furniture or similar, a safety gap of approximately 150mm should be maintained or some form of heat insulation fitted.
N.B Images are for illustrative purposes only. Specifications are subject to change without notice.
