Rapid RF-600 Single Pan Three Basket Rapid Fryer

Quick services and fast-food chain restaurants drove the need for speed and consistency. As a result, these venues require a fryers that can recover quickly under load and, more importantly, are dependable. This means that these fryers have been tested time and time again.

Whether you run a QSR, fish & chip shop, or a high-volume restaurant, this fryer is built for speed, efficiency, and consistency. 

Designed for larger operations, this powerhouse features:  

• 600mm wide design with three baskets – 50% more cooking capacity 

• 125 megajoules of power with Rapid Jet Burner system for fast recovery 

• 30L oil capacity with a deep cold zone to extend oil life 

The current models have a slimmer body than before. The newly upgraded and improved Rapid Fryers are constructed using AISI 304 grade stainless steel, to ensure that they are virtually indestructible. Moreover, the 1.5mm-2mm thick stainless steel tanks guarantee it will withstand the pressures of a busy kitchen for years on end. Each Rapid Fryer is powered by a highly effective, energy-efficient target burner to ensure even heat distribution throughout the oil; perfect for large quantity frying. Additionally, it not only assists in temperature recovery time but reduces gas consumption. The Rapid Fryers also feature an over-temperature safety cut-out switch. This not only protects the fryer from overheating and breaking down, but it also protects the safety of your staff as well.

With 20-40 litre oil capacity pans and a 24-month warranty the Rapid Fryer can handle the busiest services over and over again.

Standard Features:

• AISI Grade Stainless Steel

• Stainless steel constructed pan with centre cool zone – 1.5mm Thick

• Efficient multi-jet target burner

• +/- 3°C temperature recovery differential

• Over-temperature safety cut-out switch

• 30L oil capacity

• Flame Failure - Included as standard

• Piezo ignition to pilot multi-jet target burner

• Inclined base provides greater ease in oil and waste removal

• Complete with baskets, wire tray, night cover & lift off basket hanger

• Front access to all components creates ease of service

• Pan Dimensions: 370mm L x 500mm W x 80mm H (Height is measured from the wire tray to the oil level mark)

Options:

• Natural or LPG Gas - please advise when ordering

• Non-swivel rear castors – Set of two

External Dimensions: 600mm L x 800 D x 1130 H

Gas Consumption (Mj/h): NG: 125/ LPG: 125

Connections: 

Gas (GI) (BSP): 3/4" F

Oil Outlet (OO) (BSP): 1 1/4" F

Supply Pressure (kPa): NG: 1.0 LPG: 2.6

Warranty: 2 Years

* Combination control valve with inbuilt regulator is supplied within the unit

• Must be installed by an authorised installer in accordance to AS/NZS5601 refer to current version

Approval Number: GMK 10683

N.B Images are for illustrative purposes only. Specifications are subject to change without notice.